• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.547-556
• /
• 1996

The purpose of this study was to evaluate the skeletal, dental and soft tissue profile changes following the face mask therapy in growing skeletal class III malocclusion patients. The fifteen patients with the good results were selected among the patients who visited the Department of Orthodontics in Seoul National University Hospital. The mean age was 10.63(range 7.25-13.25) years and the mean treatment duration was 9.84(range 2.00-27.00) months. Lateral cephalograms were taken just before and after face mask application. After tracing the cephalograms, thirty five items(twety angular and fifteen linear) were measured. The differences before and after the face mask therapy were compared statistically by the paired t-test(p<0.05). The results were as follows : SNA and Co-A(effective maxillary length) increased significantly after using the face mask(p<0.001), which reflects the orthopedic changes of maxilla. SNB and Co-Gn(effective mandibular length) also showed an increase(p<0.01), which may be a result of the strong growth trends of the samples. FMA, SN-GoGn and Y-axis angle increased significantly(p<0.01), which means the backward and downward rotation of the mandible. This positional change seemed to have compensated an increase of effective mandibular length. There was no statistically significant difference in angulation of upper and lower incisors between pre-treatment and post-treatment(p>0.05). In soft tissue profile, the upper lip was positioned anteriorly(p<0.01) after treatment and approximated to the normal standards.

• The korean journal of orthodontics
• /
• v.26 no.3
• /
• pp.267-279
• /
• 1996

This study was investigated the changes during treatment and retention period in the Class III malocclusion patients and explored the correlationship between factors that showed relapse tendencies and pre-treatment skeletal pattern and the changes during treatment period. Numbers of total sample were 24 and their Hellman's dental age at the start of treatment was over III B and were retained at least over 1 year 6 months. The following conclusion were obtained by comparing the differences between treatment period and retention period, and after analysing the correlationship of factors that manifested relapse tendencies. 1. The angles formed by FH plane and occlusal plane, FH plane and mandibular plane, and mandibular incisor and mandibular plane changes showed rebound effect during retention period and among them occlusal plane angle and IMPA show reverse correlationship. 2. Upward displacement of the occlusal plane at the end of treatment has returning tendency, is proportional to the displacement during treatment period, but the angle between maxillary and mandibular 1st molar to its basal bone have been constantlsy maintained during the retention period. 3. Mandibular plane decrease during retention period and downward backward rotation during treatment period show correlationship.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.11
• /
• pp.861-871
• /
• 2020

Raising the speed of the momentum wheel in the CMG increases the unintended force and torque caused by mass imbalance. This unintended force and torque should be minimized to get the better quality of satellite SAR image because they lead to the vibration of the output image. This paper shows the works on compensating the static imbalance and couple mass imbalance in the CMG wheel. First, the force and torque at the center of mass generated by the mass imbalance were predicted through M&S analysis. Second, the force and torque were estimated similarly through the M&S analysis when the measurement point was moved from the rotation center. Third, the measurement configuration for the force and torque by the mass imbalance was described. Fourth, the change of the force and torque by adding the specified mass to the momentum wheel was observed after comparing the measurements with the results of the M&S. And finally, the effect of the compensation was analyzed by comparing the force and torque before and after the correction while 24Nm class CMG was running in the standby mode.

• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.216-224
• /
• 2010

The main purpose of this prospective longitudinal study was to evaluate, according to a standard clinical classification and assessment method, the effect of a standardized manual stretching and therapeutic massage program on patients with clearly defined congenital muscular torticollis. A total of 52 cases of congenital muscular torticollis who were first seen when they were less than one year old and were treated with conservative physical therapy. Before treatment, the patients were divided into one of three clinical groups: (1) sternomastoid tumor group, (2) muscular torticollis group, and (3) postural torticollis group. Of the 52 patients, 32 (61.5%) made up the sternomastoid tumor group; 15 (28.9%) the muscular torticollis group; and 5 (9.6%) the postural torticollis group. Multivariate analysis of the outcomes showed that the duration of treatment was significantly differentiated according to the clinical group (p<0.01), age at presentation (p<0.01), and a passive rotation deficit of the neck (p<0.01). The current study showed that well controlled conservative physical therapy is safe and effective in the treatment of congenital torticollis in about 84.6% of patients who are first seen before the age of one year.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.1
• /
• pp.41-55
• /
• 1999

In order to evaluate the effects of knowledge, attitude and practice on noise-induced hearing loss or hearing threshold level, questionnaire survey was performed and hearing thresholds of 1 kHz and 4 kHz were measured on 1,040 subjects with workers exposed to noise, safety and health officers. industrial hygienists, analysts rind office workers. The results were as follows ; 1. The following 6 factors were obtained by factor analysis and factor rotation of 30 questionnaire of knowledge, attitude and practice about noise; knowledge of noise (F1), concern of hearing protective devices (F2), concern of noise induced hearing loss (F3), concern of noise level and hearing impairment (F4), concern of noise in workplace (F5) and recognition of noised-induced hearing loss (F6). 56.1% of variance was explained by 6 factors. 2. Significant variables influencing knowledge, attitude and practice about noise were education level and age in F1, personal protective devices (PPE) and education level in F2, age and education level in F3, education level, age and sex in F4, PPE, education level, age and work duration in F5, and work duration and PPE in F6. 3. Hearing thresholds of 4 kHz were significantly higher in workers exposed to noise than that of in the other subjects and tended to be higher in industrial hygienists, safety and health officers and analysts than that of the office workers. 4. Significant variables influencing hearing thresholds of 1 kHz were age, education level, F5 and F6 in workers exposed to noise, and F1 in industrial hygienists. 5. Significant variables influencing hearing thresholds of 4 kHz were age, F6, sex, work duration, F1, F5, F2 and F3 in workers exposed to noise, F1 and age in safety and health officers, and F6, sex and F4 in industrial hygienists. With the above results, it suggested that workers exposed to noise be needed the education of knowledge, attitude and practice about noise in hearing conservation program for the prevention of noise induced hearing loss. Also, it suggested that health managers in workplace be needed countermeasures to prevent hearing loss although they are intermittently exposed to noise.

• Research in Plant Disease
• /
• v.23 no.2
• /
• pp.114-149
• /
• 2017

World-wide crop loss caused by insect pest and nematode reaches critical level. In Korea, similar crop loss has been gradually augmented in the field and greenhouse due to continuous crop rotation. The current methods on controlling herbivorous insects and plant parasitic nematodes are mostly depended on agro-chemicals that have resulted additional side-effect including occurrence of resistant insects and nematodes, environmental contamination, and accumulation in human body. To overcome the pitfalls, microbe-based control method have been introduced and applied for several decades. Here, we revised biological control using by the bacteria, fungi, and virus in order to kill insect and nematode and to attenuate its virulence mechanism. The introduced microbes mainly secreted out the hydrolysing enzymes and toxic compounds to target host membrane or cell wall directly. Indirectly, the microbe-triggered plant innate immunity against insects and nematodes was also reported. In conclusion, we provide a new frontier of microbe-based environmentally friendly procedure and effective methods to manage insects and nematodes.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.4
• /
• pp.263-275
• /
• 2014

In this study, connection of steel reinforced concrete(SRC) column and composite beam which consists of H-section and U-section members were tested under cyclic loading. An essential point of the composite beam is the structural performance of welded joint between the H-section and the U-section members. To improve the structural performance of joint of two beam members, vertical stiffeners, trapezoidal stiffeners, and top bars were used. Five full-scaled specimens were designed to study the effect of a number of parameters on cyclic performance of connections such as H-section beam size($H-500{\times}200{\times}10{\times}16$, $H-600{\times}200{\times}11{\times}17$), the presence of stiffeners and top bars, and the presence of no weld access hole(WAH) method. Based on the test results, deformation capacity of the specimens with H-500 series beam and H-600 series beam were 4% and 3% rotation angle, which is the requirement for the Special Moment Frame and Intermediate Moment Frame(IMF), respectively. Test result showed that deformation capacity of connection with stiffeners and top bars is greater than that of connection without stiffeners and top bars. Finally, energy dissipation capacity and strain profile of specimens were summarized.

• Korean Journal of Digital Imaging in Medicine
• /
• v.17 no.1
• /
• pp.13-18
• /
• 2015

Purpose : Skip the repetitive HRCT axial scan in order to reduce the exposure of patients during chest HRCT scan, Helical Scan Data into a reconstructed image, and exposure of the patient change and visually evaluate the usefulness of the HRCT images. Materials and method : Patients were enrolled in the survey are 50 people who underwent chest CT scans of patients who presented to the hospital from January 2015 to March 2015. 50 people surveyed 22 people men and 28 people women people showed an average distribution of 30 to 80 years age was 48 years. 50 patients to Somatom Sensation 64 ch (Siemens) model with 120 kVp tube voltage to a reference mAs tube current to mAs (Care dose, Siemens) as a whole, including the lungs and the chest CT scan was performed. Scan upon each patient CARE dose 4D (Automatic exposure control, Siemens Medical Solution Erlangen, Germany) was to maintain the proper radiation dose scan every cross-section through a device that automatically adjusts the tube current of. CT scan is the rotation time of the Tube slice collimation, slice width 0.6 mm, pitch factor was made under the terms of 1.4. CT scan obtained after the raw data (raw data) to the upper surface of the axial images and coronal images for each slice thickness 1 mm, 5 mm intervals in the high spatial frequency calculation method (hight spatial resolution algorithm, B60 sharp) was the use of the lung window center -500 HU, windows were reconstructed into images in the interval -1000 HU to see. Result : 1. Measure the total value of DLP 50 patients who proceed to chest CT group A (Helical Scan after scan performed with HRCT) and group B (Helical Scan after the HR image reconstruction to the original data) compared with the group divided, analysis As a result of the age, but show little difference for each age group it had a decreased average dose of about 9%. 2. A Radiation read the results of the two Radiologist and a doctor upper lobe and middle lobe of the lung takes effect the visual evaluation is not a big difference between the two images both, depending on the age of the patient, especially if the blood vessels of the lower lobe (A: 3.4, B: 4.6) and bronchi(A: 3.8, B4.7) image shake caused by breathing in anxiety (blurring lead) to the original data (raw data) showed that the reconstructed image is been more useful in diagnostic terms. Conclusion : Scan was confirmed a continuous, rapid motion video to get Helical scan is much lower lobe lung reduction in visual blurring, Helical scan data to not repeat the examination by obtaining HRCT images reorganization reduced the exposure of the patient.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.10-21
• /
• 2014

The joint of prefabricated steel grid composite deck is composed of concrete shear key and high-tension bolts. The flexural and shear strength of the joint were experimentally evaluated only by the bending and push-out test of the joint element. In this study the lateral load transfer behavior of the joint in deck structure system is experimentally evaluated. Several decks connected by the joint are prefabricated and loaded centrically and eccentrically. In the case of centrically loaded specimens, the analysis results show that for the same loading step the rotation angle of the joint with 4 high-tension bolts is larger than the case of the joint with 9 high-tension bolts. Consequently, flexural stiffness of deck and lateral load transfer decrease in the case of specimen with 4 high-tension bolts. But, in the case of eccentrically loaded specimens, it is found that there are no significant differences in the load transfer behavior. The further analysis results about the structural behavior of the joint show that lateral load transfer can be restricted by the load bearing capacity of the joint as well as punching shear strength of the slab. Furthermore, considering that high-tension bolts in the joint didn't reach to the yielding condition until the punching shear failure, increase in the number of high-tension bolts from 4 to 9 has a greater effect on the flexural stiffness of the joint and deck system than the strength of them.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.1
• /
• pp.57-66
• /
• 2012

The purpose of this study was to evaluate the relation between intentionally induced internal stress and cyclic fatigue failure of ProTaper Universal. ProTaper Universal (Dentsply Maillefer) S1, S2, F1, F2, F3, F4 and F5 (25 mm length) were used in this study. To give the internal stress, the ProTaper Universal were put into the .02 taper Endo-Training-Bloc (Dentsply Maillefer) until auto-stop by torque controlled motor. The rotation speed was 300 rpm and torque value was 1.0 Ncm. ProTaper Universal were grouped by the induced number of internal stress and randomly distributed among one control group and three experimental groups (n=10). The four groups were Stress 0 (control), Stress 1, Stress 2 and Stress 3. These instruments were rotated until separation. For cyclic fatigue measurement, inclined plane was used and time for separation was recorded. It was statistically analyzed using two-way ANOVA and Duncan post-hoc test at 95% confidential level. In all ProTaper Universal, there was statistically significant decrease on time for separation in Stress 3. In F2 and F3, there were statistically significant difference between control group and all experimental groups. And in F4 and F5, Stress 2 and 3 groups showed significantly lower cyclic fatigue resistance from Stress 0 group. In the limitation of this study, cyclic fatigue failure of ProTaper Universal is influenced by accumulated internal stress.