• International Journal of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.8-13
• /
• 2017

Movement technique is comprised of the movement status of the circulation differentiation rate (CDR) and rotation differentiation rate (RDR) on the shiver movement form. Condition of the differentiation rate by the shiver movement form is to be modified the teetering movement system. As to fix the movement of signal on the material of body, we compared a shiver value of the circulation differentiation rate on the circulation state. The concept of rotation differentiation rate was identified the reference of rotation differentiation signal and rotation differentiation signal by the rotation state. For detecting a alteration of the CDR-RDR of the maximum and average in terms of the movement form, and shiver movement value that was a shiver value of the top alteration of the Top-ф$_{MAX-AVG}$ with $12.80{\pm}1.27units$, that was a shiver value of the peripheral alteration of the Per-ф$_{MAX-AVG}$ with $4.38{\pm}1.15units$, that was a shiver value of the limbus alteration of the Lim-ф$_{MAX-AVG}$ with $1.65{\pm}0.25units$, that was a shiver value of the center alteration of the Cen-ф$_{MAX-AVG}$ with $0.25{\pm}0.01units$. The teetering movement will be to assess at the ability of the movement form for the control degree of differentiation rate on the CDR-RDR that was shown the circulation and rotation form by the differentiation rate system. Teetering differentiation system was modified of a form by the special movement and was included a shiver data of teetering movement rate.

• Smart Structures and Systems
• /
• v.19 no.4
• /
• pp.431-439
• /
• 2017

This investigation is aimed to develop a model of experimental-computation determination of a support moment of a cantilever beam loaded with concentrated force at its end including the optimal choice of coordinates of deflection data points and parameters of transformation of deflection data in case of insufficient accuracy of the assignment of initial parameters (support settlement, angle of rotation of the bearing section) and cantilever beam length. The influence of distribution and characteristics of sensors on the cantilever beam on the accuracy of determining the support moment which improves in the course of transition from the uniform distribution of sensors to optimal non-uniform distribution is shown. On the basis of the theory of inverse problems the method of transformation reduction at numerical differentiation of deflection functions has been studied. For engineering evaluation formulae of uncertainty estimate to determine a support moment of a cantilever beam at predetermined uncertainty of measurements using sensors have been obtained.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.6
• /
• pp.94-101
• /
• 1994

About vibration model of Six-degrees-of-freedom(DOF), in mass load, examined results for knowing dynamic interference and response variation is as follows; In case of putting mass load upon the object, experimented results on two-degrees-of-freedom of the translation-1 direction and the rotation-1 direction at open-loop-control system, about 0.19 arcsed in input of the translation-$0.1{\mu}m$ and $0.022{\mu}m$ on input of the rotation-0.5 arcsec, the justicse of motion equation is acknowledged as confirming the appearance of the interference-$0.022{\mu}m$. In establishing calculation of transformation matrix by using analogue circuit, as simulating results that used incomplete differentiation, interference is $1.7{\times}10^{-3}$ arcsec on input of the translation-$0.1{\mu}m$ and $1.4{\times}10^{4}{\mu}m$ on input of the rotation-0.5 arcsec in open-loop-control system. Also it is $4.2{\times}10^{-4}$ arcsec on input of the translation-$0.1{\mu}m$ and $5.6{\times}10^{-5}{\mu}m$ on input of the rotation-0.5 arcesc in closed-loop-control system. As closed-loop-control system is better than open-loop-control system, equivalent accordance is confirmed on original response. Finally, fundamental validity of this theory is acknowledged.

• Toxicological Research
• /
• v.22 no.2
• /
• pp.127-133
• /
• 2006

Recently, we have reported that the environmental pollutant 2-bromopropane (2-BP) induces a significant embryo-fetal developmental toxicity in rats. However, the cause of developmental toxicity and the relationship between maternal and developmental toxicities could not be elucidated because the developmental toxicity of 2-BP was observed only in the presence of maternal toxicity The in vitro teratogenicity study using whole embryo culture was carried out to understand the teratogenic properties and the possible mechanism of teratogenicity induced by 2-BP in rats. Rat embryos aged 9.5 days were cultured in vitro for 48 hrs at medium concentrations of 0, 1, 3, or 10 mg/ml of 2-BP. Embryos were evaluated for growth, differentiation, and morphological alterations at the end of the culture period. At 10 mg/ml, 2-BP caused a delay in the growth and differentiation of embryos and an increase in the incidence of morphological alterations, including altered yolk sac circulation, abnormal axial rotation, craniofacial hypoplasia, open neuropore, absent optic vesicle and kinked somites. At 3 mg/ml, only a delay in the growth and differentiation of embryos was observed. There were no adverse effects on embryonic growth and development at the concentration of 1 mg/ml. The results showed that the exposure of 2-BP to rat embryos results in a developmental delay and morphological alterations at dose levels of 3 mg/ml culture media or higher and that 2-BP can induce a direct developmental toxicity in rat embryos.

• Journal of the Korea Computer Industry Society
• /
• v.8 no.3
• /
• pp.155-166
• /
• 2007

In this paper, captured face-image was pre-processing, segmentation, and extracting features from thinning by differential operator and minute-delineation. A straight line in slope-intercept form was transformed at the $r-\theta$ domain using Hough Transform, instead of Housdorff distance are extract feature as length, rotation, displacement of lines from thinning line components by differentiation. This research proposed a new approach compare with Hough Transformation and Housdorff Distance for face recognition so that Hough transform is simple and fast processing of face recognition than processing by Housdorff Distance. Rcognition accuracy rate is that Housdorff method is higher than Hough transformation's method.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.183-188
• /
• 2006

This research is to know differentiation of CP(center of pressure) pattern among four pitching sort(straight ball, raise ball, change up ball, drop ball). Subject are three national or junior athletes. We use the one camera, Novel Win pressure measurement system. Conclusions are as follows : 1. When we throw the straight ball, CP of left foot is effective to end movement at middle of foot in body balance on arm angular motion and enhanced speed. 2. When we throw the raise ball, to change CP from middle to post is more effective in order to raise the ball. 3.In drop ball pitching, in order to fall down the ball in front of hitter, CP of left foot move from post foot to interior part of forefoot 4. In change up ball pitching, if CP of left foot move into forefoot, it is a cause of high ball and hitter can recognize the change up ball because of late arm rotation motion.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1857-1862
• /
• 2016

Human activity recognition using depth information is an emerging and challenging technology in computer vision due to its considerable attention by many practical applications such as smart home/office system, personal health care and 3D video games. This paper presents a novel framework of 3D human body detection, tracking and recognition from depth video sequences using spatiotemporal features and modified HMM. To detect human silhouette, raw depth data is examined to extract human silhouette by considering spatial continuity and constraints of human motion information. While, frame differentiation is used to track human movements. Features extraction mechanism consists of spatial depth shape features and temporal joints features are used to improve classification performance. Both of these features are fused together to recognize different activities using the modified hidden Markov model (M-HMM). The proposed approach is evaluated on two challenging depth video datasets. Moreover, our system has significant abilities to handle subject's body parts rotation and body parts missing which provide major contributions in human activity recognition.

• Toxicological Research
• /
• v.20 no.2
• /
• pp.117-122
• /
• 2004

The present study was carried out to establish a short-term teratogenicity study for detecting developmental toxic potential induced by gamma radiation in ICR mice. Pregnant mice were exposed at dose levels of 0, 0.5, 1, 2, or 4 Gy on gestational day 8.5. All dams were subjected to caesarean section on gestational day 10.5 and their embryos were examined for growth, differentiation, and morphological abnormalities. An increase in the number of resorption was found at 4 Gy in a dose-dependent manner. Dose-dependent decreases in the developmental score of yolk sac circulation and olfactory system at above 1 Gy, in the number of somite pairs and developmental score of allantois, optic system, and maxillary process at above 2 Gy, and in the all growth and developmental parameters examined at 4 Gy were found. Various types of morphological abnormalities were seen at dose levels of 0.5 Gy or greater. Characteristic malformations induced by gamma radiation were abnormal axial rotation, hematoma, craniofacial hypoplasia, open neuropore, shortened prosencephalon, kinked somites, irregular somites, swelling, hydropericardium, absent branchial bar, and absent limb bud. Morphological alterations such as hematoma, craniofacial hypoplasia, open neuropore, and kinked somites were noted even in the lowest dose (0.5 Gy). These results indicated that the short-term teratogenicity study established in this study can be a useful tool for not only detecting the developmental toxic potential induced by gamma radiation, but also screening radio-protective agents in ICR mice.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.32 no.2
• /
• pp.49-53
• /
• 2016

Bone morphogenetic proteins (BMPs) are essential growth factors for bone formation, skeletal development and bone regeneration. The BMP-2/7 heterodimer is known to have remarkable effects on osteogenic induction that are even stronger than the BMP-2 or BMP-7 homodimers. We designed a recombinant human BMP-2/7 (rhBMP-2/7) heterodimer protein with four glycine residues between BMP-2 and BMP-7 protein to facilitate free bond rotation of domains. The Baculovirus Expression Vector System (BEVS) is routinely used to produce recombinant proteins in the milligram scale. In this study, the BEVS was used to express the rhBMP-2/7 protein whrer the recombinant baculovirus was recovered in the host Sf9 cells. To confirm the biological activity of rhBMP-2/7 protein secreted from the BEVS as an osteogenic differentiation and induction factor, we measured the BMP-induced ALP activity. rhBMP-2/7 could be used as an alternative to BMPs to overcome limitations like short half-life and requirement for high concentrations. Furthermore, rhBMP-2/7 may be an efficient tool for various application studies such as bone regeneration and skeletal development.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.67-70
• /
• 2008

This paper deals with the effect of radial parameters in cogging process such as reduction in height (Rh) and rotational angle ($\theta$) of a billet on a void closure for large forged products. Usually closing and consolidation of internal void defects in a ingot is a vital matter when utilized as large forged products, using a press with limited capacity and the sizes of the ingots becoming larger. Consequently, it is important to develop cogging process for improvement of internal soundness without a void defect and cost reduction by solid forging alone with limited press capacity. For experiments of cogging process, hydraulic press with a capacity of 800 ton was used together with a small manipulator which was made for rotation and overlapping of a billet. Size of a void was categorized into two types; $\emptyset$ 6.0 mm and $\emptyset$ 9.0 mm to investigate the change of closing and consolidation of void defects existed in the large ingot during the cogging process. Also open void and closed void in the ingot were tackled to show the differentiation of closing process of internal voids with respect to void sizes. In this paper systematic configuration for closing process of void defects were expressed based on this experiment results in the cogging process.