• Korean Journal of Cleft Lip And Palate
• /
• v.14 no.1_2
• /
• pp.1-18
• /
• 2011

Skeletal malocclusion is the result of abnormal dimension and alignment of each skeletal component. Understanding on these mechanisms may help to elucidate the etiology of skeletal malocclusion and to establish population-oriented treatment plans. Attempts to subdivide the Angle's classification have been performed for Class III malocclusion, while few studies have been conducted for Class II malocclusion despite recent growing interests in Class II malocclusion. 200 adults (88 male, 112 female) with skeletal Class II malocclusion were collected and subdivided using cluster analysis, using the measurements representing the dimension and the alignment of each facial skeletal component. The properties of each cluster was grouped within the subjects and a comparison between the subjects and the control group (38 male, 35 female) with normal occlusion was performed. Six clusters were finally recognized in each male and female groups. The clusters in both genders were mainly characterized by the cranial base alignment, dimension of the posterior cranial base, dimension of the mandibular ramus and the degree of mandibular rotation. The results implicate that active treatment of mandible rather than the nasomaxillary complex may be primarily considered for the correction of Korean Class II skeletal pattern.

• Physical Therapy Korea
• /
• v.25 no.4
• /
• pp.1-8
• /
• 2018

Background: Round shoulder posture, results from excessive flexed posture of the thorax, is defined as a position of scapular protraction, anterior tipping, and downward rotation. However, previous studies have focused on only passive position of the thorax during scapular posterior tilting (SPT) and have not reported on SPT combined with correction of flexed posture. Objects: The aim of this study was to compare effects of SPT and SPT with prone trunk extension (SPT + PTE) on activities of the lower trapezius, serratus anterior, and thoracic erector spinae and degree of posture in subjects with round shoulder and flexed posture. Methods: Fifteen subjects with round shoulder and flexed posture were recruited. The caliper was used to measure the degree of round shoulder and flexed posture. Electromyography was performed to collect data of muscle activities. Paired t-test was used to compare two exercise (${\alpha}=.05$). Results: When SPT + PTE was applied, the degree of round shoulder posture (p=.001) and flexed posture (p=.039) significantly decreased compared with that when SPT was applied. The lower trapezius activity significantly increased in the SPT + PTE condition compared with that in the SPT condition (p=.026). There were no significant differences in serratus anterior activity between SPT + PTE and SPT. The thoracic erector spinae activity significantly increased in the SPT + PTE condition compared with that in the SPT condition (p=.014). Conclusion: SPT + PTE might be one of the effective methods to enhance activities of lower trapezius and thoracic erector spinae, and to reduce round shoulder posture and flexed posture in subjects with round shoulder and flexed posture.

• Economic and Environmental Geology
• /
• v.32 no.2
• /
• pp.189-201
• /
• 1999

Paleomagnetic and rock magnetic investigations have been carried out for the Cretaceous Hanyang Group, exposed in the Yongyang Sub-Basins within the Kyeongsang Basin, eastern South Korea. A total of 452 oriented core samples was drilled from 31 sits for the study. The in-situ site mean direction is more dispersed than the mean direction after bedding correction, indicating that the fold test is positive at 95% confidence level. In addition, the stepwise unfolding of the characteristic remanent magfold test is positive at 95% confidence level. In addition, the stepwise unfolding of the characteristic remanent magnetization reveals that a maximum value of k is observed at 90% unfolding. Furthermore, the rock magnetic investigations and electron microscope observations of the representative samples show that the main magnetic carrier of the Hayang Group is the detrital specular hematite of single and pseudo-single domain sizes with negligible contribution of pigmentary hematite grains. These results collectively imply that the ChRM direction is the primary component acquired at the time of the formation of the strata. Provided the primary nature of the ChRM, a magnetostratigraphic correlation between polarities of the studied formation and the Geomagnetic Time Scale indicates that the Hayang Group in the Yongyang Sub-Basin can be correlated to the Cretaceous Long Normal superchron. The paleomagnetic pole position from this study is significantly different from those of the Hayang group in the Euiseong the Milyang sub-Basins. Rather the paleomagnetic pole position of the Hayang Group of the study area is closer to that of the Quaternary period or present time of the Korean Peninsula. It is hypothesized that the study area might be rotated about 25$^{\circ}$ aticlockwise with respect to the Euiseong and Milyang Sub-Basins after the formation of the strata and aquisition of the ChRM, although there is not enough geologic evidence supporting the rotation hypothesis.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.11
• /
• pp.51-57
• /
• 2001

A light beam reflected from a machined surface generally containes information concerning about its surface roughness. This study examines and proposes a surface roughness measurement technique for on-machine measurement of machined surfaces. The technique is based on the measurement of a reflected laser beam pattern and the statistical analysis of its light intensity distribution. The surface roughness was found to be closely related to the standard deviation of the light intensity on the primary axis of the reflected pattern. An image acquisition device is made up of a laser diode, a half mirror, a screen, and a CCD camera. The exact image with the primary and secondary axes of a reflected laser beam pattern is calculated through such image processing algorithm as thresholding, edge detection, image rotation, segmentation, etc. A median filter and a surrounding light correction algorithm are improve the image quality and reduce the measuring error. Using the developed measuring device the effect of screen materials and workpiece and workpiece materials was investigated. Experimental results regarding to relatively high-quality surfaces machined by grinding, polishing, lapping processes have shown the measurement error is within 10% in the range of $0.1{mu}m~0.8{\mu}m R_q.$Therefore, the proposed method is thought to be effectively used when quick measurements is needed with workpieces fixed on the machine.

• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.3
• /
• pp.51-59
• /
• 2020

PURPOSE: The purpose of this study was to provide clinical basic data to reduce pain and improve function by comparing neck muscle activity and neck alignment using self-stretching and passive stretching exercises for chronic neck pain caused by forward head posture. METHODS: The subjects were divided into 15 subjects assigned to perform self-stretching exercise and 15 subjects assigned to perform passive stretching exercise. The intervention was conducted for a total of 4 weeks. The muscle activity in the neck was measured by surface electromyography (EMG) before intervention, and craniovertebral and cranial rotation angles were measured by X-ray. The 4-week intervention was conducted and the above items re-measured in the same manner and analyzed. RESULTS: Muscle activity within both groups after intervention using self-stretching or passive stretching exercise was significantly different (p < .05)(p < .01). Neck alignment of both groups was significantly different (p < .001)(p < .01). Further, muscle activities of the upper trapezius and splenius capitis muscles showed significant differences (p<.05). Lastly, neck alignment showed statistically significant difference (p < .05). CONCLUSION: Self-stretching exercise activated motor nerves as a posture correction exercise, thereby improving inhibition of muscle activity, muscle contraction delay, and pathological conditions of the muscle. For future research, interventions of self-stretching exercise will be needed for patients with chronic back pain accompanied by forward head posture, and various clinical studies on postural improvement of forward head posture by maintaining a normal muscle tone state are needed.

• Economic and Environmental Geology
• /
• v.26 no.4
• /
• pp.519-539
• /
• 1993

A total of 264 independently oriented core samples were collected from 26 sites in the southwestern part (the Naktong Trough) of the Cretaceous $Ky{\check{o}}ngsang$ Basin in south Korea. The sampled formations comprise the sedimentary Shindong and the Hayang Groups of the Lower Cretaceous age. Alternating field and thermal demagnetizations were conducted. Characteristic remanent magnetization (ChRM) was relatively easily isolated in each formation except in the Chinju formation, from which only remagnetization circles were observed. Even though an extensive use of the fold test was not possible due to the nearly homoclinal nature of the strata in the area, we believe that the ChRM of each formation is of primary origin based on the following grounds: The in-situ ChRM direction of each formation is different from the present geomagnetic field direction. Fisherian precision parameter becomes enhanced through the tilt correction in all formations, closely to the values required for a positive fold test. Three out of the five studied formations pass the reversal test. The mean palaeomagnetic pole position from the studied area is found to be statistically different from the contemporary pole from the Chinese block exclusive of the Shandong area. The difference in magnetic declination suggests a $14.5^{\circ}$ (${\pm}10.5^{\circ}$) clockwise rotation of the studied area relative to the Chinese block comprising the west of the Tan-Lu fault. On the other hand, any significant difference in magnetic inclination and concurrent palaeolatitude is not observed between the studied area and China as well as the other area (Taegu-Andong area) in the $Ky{\check{o}}ngsang$ Basin. The dual nature of the magnetic polarity confirmed in all formations suggests an older than 124 Ma (Neocomian or older) age of the studied sedimentary strata.

• The Journal of the Korean dental association
• /
• v.55 no.6
• /
• pp.400-410
• /
• 2017

Approximately 30% of adult patients who want orthodontic treatment have transverse discrepancy with insufficient width of the maxilla. Particularly, in Class III patients requiring orthognathic surgery, the frequency of insufficient width of the maxillary arch related to respiratory problems is high. We report a case of non-surgical maxillary expansion using a Hyrax type expander with an orthognathic surgery, based on the reports that the ratio of non-fused midpalatal suture is not high in adults. A 30 years and 2 months old woman with a long face showed an Angle Class III with a vertical growth pattern. Class III molar and canine relation, anterior edge bite, and mandibular incisor compensatory lingual inclination were observed. The posterior buccal overjet seemed to be appropriate, but I diagnosed that there was a transverse discrepancy, for the following reasons. The inter-canine and inter-molar widths were sufficient but excessive lingual inclination of the mandibular molars was observed when assessing the bucco-lingual inclination based on the center of resistance of the maxillary and mandibular first molar. For this reason, it was expected that intercuspal interference would occur during orthodontic decompensation. Therefore, slow maxillary expansion using Hyrax type expander was performed and 2-jaw rotation surgery was performed to improve aesthetic and occlusion. Adults can also improve width discrepancy by non-surgical methods, which can avoid SARPE requiring additional surgery or segmental surgery lacking stability and predictability.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.117-125
• /
• 2015

In the modern age, it is important for people to maintain a good sitting posture because they spend long hours sitting. Posture correction treatment requires a great deal of time and expenses with continuous observation by a specialist. Therefore, there is a need for a system with which users can judge and correct their postures on their own. In this study, we collected users' postures and judged whether they are normal or abnormal. To obtain a user's posture, we propose a four-joint motion capture system that uses inertial sensors. The system collects the subject's postures, and features are extracted from the collected data to build a database. The data in the DB are classified into normal and abnormal postures after posture learning using the K-means clustering algorithm. An experiment was performed to classify the posture from the joints' rotation angles and positions; the normal posture judgment reached a success rate of 99.79%. This result suggests that the features of the four joints can be used to judge and help correct a user's posture through application to a spinal disease prevention system in the future.

• Journal of Digital Convergence
• /
• v.13 no.1
• /
• pp.331-339
• /
• 2015

The purpose of this study is to evaluate utility of rotating adjustment using Xsight spine tracking system in 3D DOF location adjusting method, to minimize error between 6D DOF and 3D DOF in fiducial tracking system. In this study, the result of 6D DOF target location error is $0.124{\pm}0.058mm$, using fiducial inside tumor 3D DOF $0.673{\pm}0.142mm$, outside tumor $1.126{\pm}0.253mm$, apply with Xsight spine tracking system 3D DOF $0.542{\pm}0.103mm$. As the experiment shows, it was demonstrated that rotating adjustment through Xsight spine tracking system is valuable in case of treatment in 3D DOF location error that makes increasing accuracy and dose distribution each approximately 48% and 3%. In accordance with result of this study is useful rotation.

• Journal of Broadcast Engineering
• /
• v.17 no.1
• /
• pp.26-36
• /
• 2012

Since shape of an object in an image carries important information in contents based image retrieval (CBIR), many shape description methods have been proposed to retrieve images using shape information. Among the existing shape based image retrieval methods, the method which employs invariant Zernike moment desciptor (IZMD) showed better performance compared to other methods which employ traditional Zernike moments descriptor in CBIR. In this paper, we propose a new image retrieval method which applies invariant angular radial transform descriptor (IARTD) to obtain higher performance than the method which employs IZMD in CBIR. IARTD is a rotationally invariant feature which consists of magnitudes and alligned phases of angular radial transform coefficients. To produce rotationally invariant phase coefficients, a phase correction scheme is performed while extracting the IARTD. The distance between two IARTDs is defined by combining the differences of the magnitudes and the aligned phases. Through the experiment using MPEG-7 shape dataset, the average bull's eye performance (BEP) of the proposed method is 0.5806 while the average BEPs of the exsiting methods which employ IZMD and traditional ART are 0.4234 and 0.3574, respectively.