• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.367-369
• /
• 2009

Optically anisotropic rotating balls were disposed in a monolayer, and controllably closely packed with respect to one another in the monolayer. The close packed monolayer configuration provided high brightness and improved contrast. The monolayer rotating ball display (MRB) electrically demonstrated a fast response time of approximately 40 msec at a voltage of 30 V. Measurements of the rotation as a function of voltage led to surface charge density for the balls in the range of 3-4 ${\mu}C/m^2$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.20.1-20.1
• /
• 2010

'Electronic paper (EP)' provides desirable viewing characteristics of paper with being thin, lightweight, flexible, and recordable with minimal power consumption. Currently, a number of different technologies to realize the EP are actively competing. Here we demonstrate a newly developed monolayer rotating ball (MRB) electronic paper display where optically anisotropic rotating balls were disposed in a monolayer, and controllably closely packed with respect to one another. The close packed monolayer configuration provides high brightness and improved contrast with better electrical and optical features in comparison with the typical (Gyrion) rotating ball display. In this talk, we present characteristics of the MRB display in terms of performance, with particular emphasis on the response time as a function of the electric field.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2004.05a
• /
• pp.169-173
• /
• 2004

Rotating Compensator Ellipsometry에 회전하는 시편 홀더를 갖추었을 때 uniaxial한 시편의 광축과 retardance를 측정하는 것이 매우 간단해진다. 이것은 Dual Rotating Compensator Transmission Ellipsometry의 self-calibration과정과 흡사하기 때문이다. 기존의 ellipsometry가 광학 부품들의 입사면에 대한 방위각을 찾는 복잡한 calibration과정과 비등방성 시편의 고속축의 방향을 찾아야 하는 수고를 필요로 하지만 rotating sample and compensator ellipsometry는 self-calibration과 자동으로 고속축의 방향을 찾기 때문에 매우 편리하다. 우리는 이 기술를 정렬된 액정display panel에 적용하여 ~$0.4^{\circ}$ 의 작은 retardance 간을 측정할 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.510-512
• /
• 2009

A volumetric 3D display system based on a rotating two dimensional color LED array is set up. It has a cylinder display space ${\Phi}800{\times}640mm3$ which is composed of 256 slices of pictures in one 3D image with each slice $320{\times}256$ LED pixels. The volumetric image has 4 gray scales and 64 colors. The main structure and working principle of the system is described in detail.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.440-441
• /
• 2004

A volumetric three-dimensional (3D) display system was presented, which utilizes a rotating two-dimensional (2D) display panel of light emitting diodes (LEDs) to generate more than 10 million volume pixels (voxels) within a cylindrical volume of 165 mm in height and 292 mm in diameter. Due to persistence of vision, momentarily addressed voxel information is perceived and fused into a 3D image. Important cues for depth perception, such as binocular parallax, accommodation, convergence and motion parallax are satisfied automatically and naturally, thus it is suitable for individual or group viewing, without the need for any special visual aids.

• Journal of the Semiconductor & Display Technology
• /
• v.2 no.2
• /
• pp.1-4
• /
• 2003

We have developed a rotating compensator spectroscopic ellipsometer (RCSE). As the ellipsometry measures a change in the polarization state of a light wave upon non-normal reflection from surface, the degree of sensitivity is enhanced greatly through the detection of relative phase change. RCSE acquires additional information from the non-ideal surface of sample and operates over the photon energy range from 1.5 to 4.5 eV. We applied RCSE to measure the optical properties of films and the line-width of patterned PR films on crystalline silicon.

• Journal of IKEEE
• /
• v.19 no.2
• /
• pp.168-175
• /
• 2015

In this paper, we propose FPGA design technique for rotating LED display device which is capable of displaying videos with the use of the afterimage effect. The proposed technique is made up of image data correction process based on inverse gamma correction and error diffusion, block interleaving process, and data serial output process. The data correction process based on inverse gamma correction and error diffusion is an image data correction step in which image data received are corrected by inverse gamma correction process to convert the data into linear brightness characteristics, and by error diffusion process to reduce the brightness reduction phenomenon in low-gray-level which is caused by inverse gamma correction. In the block interleaving process, the data of the frames entered transversely are first saved in accordance with entrance order, and then only the longitudinal image data are read. The data serial output process is applied to convert the parallel data in a rotating location into serial data and send them to LED Driver IC, in order to send data which will be displayed on high-speedy rotating LED Bar. To evaluate the accuracy of the proposed FPGA design technique, this paper used XC6SLX45-FG484, a Spartan 6 family of Xilinx, as FPGA, and ISE 14.5 as a design tool. According to the evaluation analysis, it was found that goal values were consistent with simulation values in terms of accurate operation of inverse gamma and error diffusion correction, block interleaving operation, and serialized operation of image data.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1299-1301
• /
• 2006

A visual display is formed by picture elements, which are optically coupled to optical pathways through which light is supplied from light sources. Light sources, controlled by control hardware, transmit light to the optical pathways by scanning light from the light sources to different optical pathways. The light sources and the optical pathways are mutually oriented so that light from the light sources can be canned to different optical pathways to form the displayed image. Light sources can be mounted to a rotating mounting that rotates past static pathways that transmit coupled light to the waveguide screen.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.7
• /
• pp.583-589
• /
• 2008

For the purpose of monitoring by ultrasonic test of the ball bearing conditions in rotating machinery, a system for their diagnosis was developed. ultrasonic technique is used to detect abnormal conditions in the bearing system. And various data such as frequency spectrum, energy and amplitude of ultrasonic signals, and ultrasonic parameters were acquired during experiments with the simulated ball bearing system. Based on the above results and practical application for power plant, algorithms and judgement criteria for diagnosis system was established. Bearing diagnosis system is composed of four parts as follows : sensing part for ultrasonic sensor and preamplifier, signal processing part for measuring frequency spectrum, energy and amplitude, interface part for connecting ultrasonic signal to PC using A/D converter, graphic display and software part for display of bearing condition and for managing of diagnosis program.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.1
• /
• pp.31-34
• /
• 2004

We develop Mueller-matrix spectroscopic ellipsometry based on dual compensator configuration. This technique is very powerful for measuring surface anisotropy in nano-scale, especially when materials show depolarization. Dual-rotating compensator configuration is adopted with the rotational ratio of 5:3 originally developed by Collins et al[1]. The instrument can provide 250-point spectra over the wavelength range from 230 nm to 820 nm in one irradiance waveform with minimum acquisition time of Tc=10 s. In this work, the results obtained in transmission modes are presented for the initial attempt. We present calibration procedures to diagnose the system from the utilized data collected in transmission mode without sample. We expect that the instrument will have important applications in thin films and surfaces that have anisotropy and inhomogeneity.