• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.97-98
• /
• 2012

The rotary kiln is one of the most widely used industrial reactors for contacting gases and solids. Kilns are mainly used for drying, calcining and reducing solid materials. In an indirected fired rotary kiln, heat is supplied to the outside of the kiln wall. Heat transfer in indirected fired rotary kilns encompasses all the modes of transport mechanisms, that is, conduction, convection and radiation. This paper deal with the heat transfer characteristics of indirect fired rotary kiln for scale up.

• 한국공작기계학회논문집
• /
• 제11권5호
• /
• pp.58-64
• /
• 2002

Mirror surface finish of Si-wafers has been achieved by rotary in-feed machining with cup-type wheels in ELID grinding. But the diameter of the workpiece is limited with the diameter of the grinding wheel in the in-feed machining method. In this study, some finding experiments by the rotary surface grinding machine with straight type wheels were conducted, by which the possible grinding area of the workpiece is independent of the diameter of the wheels. For the purpose of investigating the grinding characteristics of large scale diametrical silicon wafer, grinding conditions such as rotation speed of grinding wheels and revolution of workpieces are varied, and grinding machine used in this experiment is rotary type surface grinding m/c equipment with an ELID unit. The surface ground using the SD8000 wheels showed that mirror like surface roughness can be attained near 2~6 nm in Ra.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2011-2014
• /
• 2008

A linear induction motor for urban railway transit is accompanied with the end-effect and large air-gap comparing with a rotary induction motor. These cause amount of difference between simulation results and experiments. In order to figure out the difference, experiments based on a real-scale test bed are indispensable, however building a test-line and a test vehicle is so difficult that authors are going to make a small-scale model and simulate it for comparison. In this paper, A rotary-type small-scale model of a linear induction motor is designed. Thrust and normal force of the model have been analyzed with the variation of frequency and speed by using a Finite Element Method(FEM).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.946-949
• /
• 2001

Mirror surface finish of Si-wafers has been achieved by rotary in-feed machining with cup-type wheels in ELID grinding. But the diameter of the workpiece is limited with the diameter of the grinding wheel in the in-feed machining method. In this study, some grinding experiments by the rotary surface grinding machine with straight type wheels were conducted, by which the possible grinding area of the workpiece is independent of the diameter of the wheels. For the purpose of investigating the grinding characteristics of large scale diametral silicon wafer, grinding conditions such as rotation speed of grinding wheels and revolution of workpiece are varied, and grinding machine used in this experiment is rotary type surface grinding m/c equipped with an ELID unit. The surface ground using the SD8000 wheels showed that mirror like surface roughness can be attained near 2~6nm in Ra.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.660-665
• /
• 2002

Mirror surface finish of Si-wafers has been achieved by rotary in-feed machining with cup-type wheels in ELID grinding. But the diameter of the workpiece is limited with the diameter of grinding wheel in the in-feed machining method. In this study, grinding experiments by the rotary surface grinding machine with straight type wheels ware conducted, by which the possible grinding area of the workpiece is independent of the diameter of the wheels. For the purpose of investigating the grinding characteristics of large scale diametrical silicon wafer, grinding conditions such as rotation speed of grinding wheels and revolution of workpieces are varied, and grinding machine used in this experiment is rotary type surface grinding n/c equipment with an ELID wit. The surface ground using the SD8000 wheels showed that mirror like surface roughness can be attained near 2 - 6 nm in Ra.

• 한국정밀공학회지
• /
• 제32권6호
• /
• pp.543-551
• /
• 2015

In this study, a novel method for dimension measurement of large-scale moving objects using stereo camera with 2-degree of freedom (2-DOF) mechanism is presented. The proposed method utilizes both the advantages of stereo vision technique and the enlarged visibility range of camera due to 2-DOF rotary mechanism in measuring large-scale moving objects. The measurement system employs a stereo camera combined with a 2-DOF rotary mechanism that allows capturing separate corners of the measured object. The measuring algorithm consists of two main stages. First, three-dimensional (3-D) positions of the corners of the measured object are determined based on stereo vision algorithms. Then, using the rotary angles of the 2-DOF mechanism the dimensions of the measured object are calculated via coordinate transformation. The proposed system can measure the dimensions of moving objects with relatively slow and steady speed. We showed that the proposed system guarantees high measuring accuracy with some experiments.

• 한국생산제조학회지
• /
• 제21권6호
• /
• pp.926-931
• /
• 2012

Rotary bar was cutting tool being in use for deburring scale after welding metal and for eliminating sharp edges. It was necessary to develop exclusive 6-axis machine being possible to process machining continuously for making an cutting edge of rotary bar and to revise easily machining program. This study aimed at the structural analysis of strength according to the configuration of new made 6-axis machine and at the machining accuracy and durability of rotary bar. As a result of test, the runout of new rotary bar manufactured out of 6-axis machine was decreased from 0.385 mm to 0.027mm extensively than old one. And good cutting ability and durability was obtained equal quality compared with imported products.

• Environmental Engineering Research
• /
• 제17권2호
• /
• pp.69-75
• /
• 2012

Composting of water hyacinth, mixed with cattle manure, rice husk and sawdust in four different proportions, was performed in a pilot scale rotary drum composter. The physico-chemical characteristics, i.e., temperature, moisture content, pH, electrical conductivity, total organic matter (OM), nitrogen dynamics and nutrients were evaluated during the 20 days composting process. The stabilities of the composts were also investigated with respirometric analysis, i.e., $CO_2$ evolution rates and oxygen uptake rate (OUR). Among all trials, trial 1 (6 water hyacinth, 3 cattle manure, 1 rice husk) indicated the best composting mix, as shown by the highest temperature profile and OM loss, and lowest $CO_2$ evolution rate and OUR.

• 한국지반신소재학회논문집
• /
• 제15권1호
• /
• pp.37-46
• /
• 2016

로타리 파일은 단일 또는 다수의 나선날개와 파일강관으로 구성되어 있으며, 나선 회전운동으로 관입이 이루어진다. 연약한 지반에 관입된 파일은 나선날개 원판과 나선날개가 부착된 파일강관에 의해 지지력을 발휘할 수 있다. 또한 비교적 단단한 층에 도달할 경우 파일강관 하부의 나선날개에 의해 선단지지력이 증가하게 된다. 이 연구에서는 현장에서 사용되는 로타리 파일의 나선날개를 기준으로 1/5로 축소한 로타리 파일을 화강풍화토 지반에 설치한 후 파일재하시험을 하였다. 설치된 파일은 나선날개의 개수, 크기, 간격에 따라 지지력에 영향을 미치는 것으로 나타났다. 날개의 개수가 2개에서 3개로 증가할 때 지지력이 40% 정도 증가하였으며, 날개의 간격이 증가함에 따라 지지력이 10% 정도 더 크게 나타나는 것으로 확인되었다.

• 한국철도학회논문집
• /
• 제20권2호
• /
• pp.196-202
• /
• 2017

초고속열차 추진용 실모델 선형동기전동기(Linear Synchronous Motor, LSM)의 고속운전시험을 위해서는 매우 긴 노선이 필요하고, 이로 인해 막대한 비용이 요구되며, 개발 도중 시행오차가 발생할 경우 경제적 손실이 크게 발생할 우려가 있다. 따라서 저 비용의 축소모델을 이용한 LSM 설계 기술의 타당성 검증 연구가 개발 초기 단계에 이루어져야 한다. 회전형 구조를 갖는 LSM 축소모델을 적용한 성능시험기를 통하여 LSM의 지상전기자 권선의 최적방식 도출 및 기기적 특성 파악이 가능하며, 제어시스템의 선행연구 수행에 활용이 가능하다. 따라서 본 논문에서는 600km/h급 초고속열차 추진용 LSM의 요구사양에 부합하는 회전형 시험기의 설계 모델을 도출하고, 전자계 해석 및 기구적 강성 해석을 통하여 1500rpm 이상의 고속 회전 조건에서의 최적 모델을 도출하였다.