• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.117-120
• /
• 2007

본 연구는 액체로켓엔진에 장착되는 압력 선회 분사기의 분무 모델에 대해 연구하였고, 특히 액적분포함수에 대한 영향을 고찰하였다. KIVA에 기존의 함수인 $X^2$와 Rosin-Rammler 및 수정된 Rosin-Rammler 함수에 대해 이론적으로 고찰하였고, 액체로켓엔진에 장착되는 압력 선회 분사기와 유사한 경우에 적용하였으며, Rosin-Rammler 분포가 액체로켓엔진에 장착되는 압력 선회 분사기의 분무 특성에 잘 부합되는 것을 파악할 수 있었다.

• 공업화학
• /
• 제10권3호
• /
• pp.450-455
• /
• 1999

말레산 무수물 (MA)과 diethylene glycol (DEG)을 반응시켜 볼포화기가 도입된 에스테르형 디올 (UD)을 제조한 다음 이를 로진과 MA를 반응시켜 얻은 rosin maleic anhydride adduct (RMA) 또는 2-hydroxyethylmethacrylate (HEMA)가 도입된 RMA (RMA-HEMA)와 각각 반응시켜 rosin (UPMR) 및 RMA-HEMA 변성 불포화 폴리에스테르 (UPMRH)를 각각 제조하였다. 이를 가교제로 스티렌 또는 메틸메타아크릴레이트(MMA)로 가교시킨 후 내용매성과 인장강도 및 접착특성을 측정하였다. 가교제로 스티렌을 사용하는 경우가 MMA를 사용한 것에 비해 내용메성과 인장강도가 증가하였다. 또한 UPMRH의 경우가 UPMR에 비해 내용매성이 우수하였고 인장강도도 증가되었다. 한편 T-peel test로 측정한 계면접착력에 있어서 UPMR의 경우 가교제로 스티렌 및 MMA를 사용하는 경우는 1.61과 3.02 MPa인 반면 UPMRH의 경우는 2.32와 3.89 MPa로 HEMA가 도입됨에 따라 계면접착력이 증가되었다.

• 한국인쇄학회지
• /
• 제12권1호
• /
• pp.145-157
• /
• 1994

Litho printing ink vehicles based on rosin modified phenolic are faster drying, have better durability, are harder and glosser and have greater resistance to water than ones based on ester gums. Ink-Water balance and rheological properties are important in litho printing process. These physical properties is concerned with molecular weight of Resin to use vehicle. So this paper was studied about the effects of changing molecular weight of Rosin modified phenolic on surface tension, viscosity, pseudoplasticity and printability of Litho Inks. The results were as follows. 1) The surface tension of model inks depended on the molecular \veight of the resin : Dispersion componnent of ink increase but non dispersion component decrease as molecular weight of Resin increase. 2) Water pick-up of litho ink is more fast balance, using low molecular weight of Resin. 3) Viscosity, Yield value and Newtonian value of model inks increase as molecular weight of Resin increase. 4) The litho ink prepared with the modified phenolic of which molecular weight is about 20000 showed the highest printing density and gloss.

• 폴리머
• /
• 제24권6호
• /
• pp.757-762
• /
• 2000

4-히드록시스티릴피리딘과 4-비닐벤질클로리드를 반응시켜 감광성 단량체로서 비닐벤질옥 시스티릴피리딘 (VSP)을 합성하였다. 5-20 mo1%의 VSP를 로진 moiety를 함유하는 메타크릴단량체와 라디칼 공중합하여 로진 moiety를 함유하는 몇가지 광경화성 고분자를 합성하였다. UV분광법으로 결정한 공중합체 중의 VSP의 함량은 5.3-17.3mol%정도였다. 이들 고분자의 수평균 분자량은 18000-28000정도였고 다분산지수는 1.8 정도였으며, 또한 유리전이온도는 15$0^{\circ}C$ 부근이였고 초기 열분해온도는 34$0^{\circ}C$ 정도였다. 이들 고분자는 자외선에 의해 비교적 빠르게 경화되었고, 이 광경화 반응은 UV분광법과 잔막수율법으로 분석될 수 있었다.

• 공업화학
• /
• 제5권2호
• /
• pp.313-320
• /
• 1994

로진과 말레산무수물로부터 rosin-maleic anhydride adduct(RMA)를 합성하였다. 중합반응의 단량체로서 이용하기 위한 고순도의 RMA의 합성에는 정제공정을 수반하는 용융합성법과 정제공정이 불필요한 용액합성법을 이용하였다. 용액합성법에서 합성한 RMA의 수율이 용융합성업보다 높았다. 용융합성법의 최고수율은 40%였으나 사염화탄소 및 아세트산을 반응용제로하는 용액합성법에서 얻은 생성물의 수율과 순도를 검토한 결과 비교적 고순도의 RMA를 얻을 수 있었고, 수율은 사염화탄소 용제법의 경우 48%(이론수율 87.6%), 아세트산 용제법의 경우 51%(이론수율 94%)였다.

• 대한치과재료학회지
• /
• 제43권1호
• /
• pp.81-89
• /
• 2016

The purpose of this study was to evaluate the effect of the experimental and commercial fluoride varnishes on the Vickers hardness of bovine teeth. The experimental fluoride varnishes with 5 wt.% NaF were fabricated using Bis-GMA or rosin as the resin base. The components were mixed with over-head stirrer under warming up in a double boiler for 30 minutes. Four commercial fluoride varnishes (V-varnish, Flor-opal, Cavity shield, Fluor protector) were compared with the experimental fluoride varnishes. Vickers hardness was measured on the labial surface of bovine anterior teeth after applying fluoride varnish on 5th and 30th day. The surface of bovine teeth was observed with a scanning electron microscope before and after applying fluoride varnish and the change of the components on the bovine teeth surface was measured with EDX. In terms of hardness, the experimental rosin-based fluoride varnish showed significantly higher hardness on the 5th and 30th day than the control (bovine teeth without fluoride treatment)(p<0.05). EDX results showed that the fluoride content on the surface of bovine teeth treated with the experimental rosin-based fluoride varnish was highest on the 1st and 10th day. The higher hardness and fluoride content of experimental rosin-based fluoride varnish can be considered to be used as an effective fluoride varnish to prevent dental caries.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3413-3416
• /
• 2012

Phenol-free resin was synthesized and its printing ink properties were investigated. The phenol-free resin was produced by esterification of poly phthalate and Diels-Alder adduct of rosin anhydride. Compared to rosin modified phenolic resin, eco-friendly phenol-free resin showed better vehicle properties in terms of gloss, yellowing, runability, and storage stability. The results suggest the utility of phenol-free resin instead of conventional rosin modified phenolic resin.

• 한국인쇄학회지
• /
• 제24권1호
• /
• pp.1-12
• /
• 2006

The rheological characteristics of an ink relate to its performance on the press and to the printing quality such as ink stability, transfer characteristics, mottle, squash, misting, dot gain, and so on. For lithographic print, the emulsification of ink is an important factor to determine the product. And also the rheological characteristics of the emulsified ink should be investigated. Thus, in this study, the effects of the changing molecular weight of rosin modified phenolic resin on the water-pickup ratio of neat inks were studied. And then rheological properties of neat inks and emulsified inks with changing molecular weight of rosin modified phenolic resin were analyzed by using rotational rheometer.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.390-393
• /
• 1999

In this paper, a series of PAC (polyaluminum chloride) samples were prepared for rosin neutral sizing system. Some characters of PAC were discussed in detail. The experimental results show that it is possible to achieve neutral sizing when PAC is compounded with DRS (dispersed rosin size) instead of alum (aluminum sulfate).

• 펄프종이기술
• /
• 제48권2호
• /
• pp.56-60
• /
• 2016

Neutral or alkaline papermaking provides many advantages in paper strength and processing conditions. It also provides the opportunity of using calcium carbonate fillers in papermaking. These diverse advantages have made almost all paper machines of printing and writing papers run under neutral and alkaline conditions. On the other hand, linerboard machines, which use recycled papers as a raw material, are running under acid conditions using a rosin sizing system. Because the recycled raw materials used by the linerboard industry contain significant amounts of alkaline papers, the linerboard industry has an interest in the possibility of using the neutral or alkaline papermaking opportunity. In this study, the compatibility of the recycled linerboards under neutral or alkaline papermaking conditions was examined by recycling them under various pH conditions. The sizing degree of the papers recycled under neutral or alkaline was significantly lower than that of acid formed papers indicating that during the neutral or alkaline recycling process the rosin sized papers lost their sizing efficiency. Recycling of acid formed linerboards under neutral or alkaline conditions increased the amount of foam, and the foam contained substantial amount of solid materials derived from the acid sizing systems. Use of cationic polyelectrolytes including PEI and poly-DADMAC improved the sizing degree of the recycled papers under neutral and alkaline conditions. PEI decreased the foam generation as well while poly-DADMAC did not show any reducing effect of the foam. These results suggest that PEI forms coordinate bonds with rosin acid and precipitate them onto the surface of recycled fibers, while the reaction products between poly-DADMAC and rosin acid ions still remain water soluble under neutral or alkaline conditions.