• Title/Summary/Keyword: root powder

Search Result 223, Processing Time 0.023 seconds

Characteristics on Arc Waveform and RMS of Current by Conductive Powder (도전성 분말에 의한 아크전류의 파형 및 실효값 특성)

  • Kim, Doo Hyun;Kang, Yang Hyun
    • Journal of the Korean Society of Safety
    • /
    • v.28 no.3
    • /
    • pp.63-68
    • /
    • 2013
  • This paper is aimed to make an analysis on characteristics of the parallel arc waveform and RMS of current at the electrical tracking state by conductive powder. In order to achieve the goal in this paper, field state investigation at metal processing companies in Chung-Nam province area was conducted. With the field state investigation, conductive powder were collected from metal processing companies. By experiment on electrical connector(breaker, connector) over which the conductive powder were scattered, arc waveform and RMS of current were measured. The measured waveform and RMS(root-mean-square) of current were analyzed to describe characteristics and patterns of electrical arc by the conductive powder. It was proved that conductive powder on electrical connector can flow electrical current enough to make electrical fire with high thermal energy. Also the change of sine waveform and RMS of current can be used to find out relationship between electrical fire and fault signal by conductive powder. The results obtained in this paper will be very helpful for the prevention of electrical fires occurred at the metal processing companies.

Studies on the Dissolution Rate of Prednisolone Powder and Tablets (Prednisolone분미(粉未) 및 Prednisolone정제(錠劑)의 용출속도(溶出速度)에 관한 연구(硏究))

  • Shin, Im-Sick;Yong, Jae-Ick
    • Journal of Pharmaceutical Investigation
    • /
    • v.4 no.4
    • /
    • pp.26-37
    • /
    • 1974
  • Having measured physical canstant and dissolution rate of prednisolone powder, and tablets, also particle size, particle number of powder disintegration, hardness, friability of prednisolone tablets and having also compared it's interrelationship. We obtained the results as following. 1) Dissolution rate of prednisolone powder was determinded cube root rule and: the slope $({\alpha})$ was $3.1915{\times}10^{-2}$. 2) The tablet used in this study was fourteen kind of prednisolone tablets, two kinds of which were not conformity with prednisolone dissolution rate test of U.S.P. XVIII, but the rest of them were conformity with the same test (t60% was 4.3minute in average) 3) There was no significant interrelationship between disintegration, hardness, friability and dissolution rate of prednisolone tablet used in this study but we recognized the disintegration time was greatly influenced by the dissolution rate.

  • PDF

Effects of Roots Powder of Balloonflowers on General Composition and Quality Characteristics of Sulgidduk (도라지 분말이 설기떡의 일반성분 및 품질특성에 미치는 영향)

  • Kim, Jong-Wook;Hwang, Su-Jung
    • Journal of the Korean Society of Food Culture
    • /
    • v.22 no.1
    • /
    • pp.77-82
    • /
    • 2007
  • The general composition like moisture content, and the physical and sensory characteristics of the steamed rice cake added with powder of roots of balloonflowers were as follows. The moisture content in the roots was 4.13${\pm}$0.01%, crude protein 9.24${\pm}$0.11%, crude fat 3.07${\pm}$0.04%, crude fiber 33.82${\pm}$0.01%, and crude ash 8.16${\pm}$0.02%. The moisture content of the cake was decreased with increase of the root’s powder added. In physical characteristic, the hardness of the cake was increased with increase of the powder. The control cake was the highest in the cohesiveness. The springiness tended to be increased with increase of the powder. The gumminess was higher with increase of the powder, being 530.33% in the control and 284.44% in the sample with 12.0% powder added. The adhesiveness was decreased with increase of the powder. The color change was significantly decreased with increase of the powder. With increase of the powder, the value a was decreased, while the value b showed to be increased. In a sensory test, the favorite degree to color, flavor, bitter taste, moistness, soft-ness and overall acceptability was measured to get the follow result. To color, the lot with 6% of the balloonflower powder added showed the highest accept-ability with the same highest result also to flavor and bitter taste. The moistness and the softness were revealed as the highest at the control, and the chewiness was also highest at the lot with 3% of the powder added. The overall acceptability was highest as 5.75 at the lot with 6% of the powder added, coming out to be higher in order of the 3% added-lot, the control, the 9%-lot and the 12%-lot.

Effect of Korea Ginseng Root on Detoxification of Heavy Metal, Mercury by Fusarium oxysporum (고려인삼이 Fusarium oxysporum에 의한 중금속 수은의 해독작용에 미치는 영향)

  • Kim, Young-Ho;Park, Eun-Kyung;Park, Kyu-jin
    • Journal of Ginseng Research
    • /
    • v.16 no.1
    • /
    • pp.24-30
    • /
    • 1992
  • Extracts of Panax ginseng root significantly induced tolerance of Fusarium oxysporum to heavy metal, mecury, as the fungal mycelial growth was less inhibited by mercury chloride on potato dextrose medium(PDA) amended with ginseng root than on the PDA with no ginseng amendment. The most favorable concentration of ginseng root powder in detoxification of mercury chloride was 1%. The induced tolerance of F. oxysporum to mercury chloride appeared to be rather due to absorption of ginseng components, and was not related to stimulation of mycelial growth of the fungus per so by ginseng treatment. Ginseng components responsible for inducing tolerance of the fungus to mercury were involved in the water fraction of the ginseng root extract, although the water fraction had no effect on enhancement of the mycelial growth on the medium without mercury chloride. The hexane fraction of ginseng root extract, by which the mycelial growth was stimulated, was not related to the inducement of the tolerance to mercury chloride. However, more tolerance to mercury chloride was noted in PDA with both the water and hexane fractions combined than with either of the two fractions. Six-year-old ginseng roots were more effective in detoxification of mercury chloride than 4-year-old ginsng roots, and American ginseng (P quinquifolium) had no or little effect on inducing tolerance of the fungus to mercury chloride. This method may be used to screen other natural materials for test in the detoxification of mercury chloride.

  • PDF

APICAL MICROLEAKAGE OF MTA WITH 4-META/MMA & TBB RESIN AS A ROOT-END FILLING MATERIAL (MTA와 4-META/MMA & TBB레진 혼합 재료의 치근단 미세누출에 관한 연구)

  • Kim, Jin-Cheol;Kim, Mi-Ri;Ko, Hyun-Jung;Yang, Won-Kyung
    • Restorative Dentistry and Endodontics
    • /
    • v.34 no.4
    • /
    • pp.371-376
    • /
    • 2009
  • We evaluated in vitro microleakage of Mineral Trioxide Aggregate (MTA) powder with 4-methacryloxyethyl trimellitate anhydride (4-META) / methyl methacrylate (MMA) & tri-n-butylborane (TBB) resin as a retrograde filling material by using methylene blue dye method. Fifty-two single rooted, extracted teeth were instrumented and obturated with gutta percha and AH plus sealer. The apical 3mm of each root was resected and 3mm deep ultrasonic root end preparation was done. External surface of roots was coated with nail varnish. Prepared teeth were randomly divided into five groups; Negative control: completely covered with nail varnish; Positive control: coated with nail varnish except for apical foramen; Group 1 (retrofilled with Portland cement); Group 2 (retrofilled with MTA); Group 3 (retrofilled with MTA powder mixed with 4-META/MMA & TBB resin). Immediately after completion of root-end filling, all specimens were submerged in methylene blue dye for 72 hours in $37^{\circ}C$incubator. The roots were longitudinally sectioned and measured for extent of dye penetration by three different examiners under microscope (${\times}$10). The results were statistically analyzed using one way ANOVA and Turkey's HSD test. No leakage was evident in negative control and complete leakage in positive control group. Group 3 showed significantly less leakage than group 1 and 2 (p < 0.01). There was no significant difference between group 1 and 2 (p > 0.01). It was concluded that MTA powder with 4-META/MMA & TBB resin was excellent in reducing initial apical microleakage.

X-Ray Diffraction Analysis of Various Calcium Silicate-Based Materials

  • An, So-Youn;Lee, Myung-Jin;Shim, Youn-Soo
    • Journal of dental hygiene science
    • /
    • v.22 no.3
    • /
    • pp.191-198
    • /
    • 2022
  • Background: The purpose of this study was to evaluate the composition of the crystal phases of various calcium silicate-based materials (CSMs): ProRoot white MTA (mineral trioxide aggregate) (WMTA), Ortho MTA (OM), Endocem MTA (EM), Retro MTA (RM), Endocem Zr (EN-Z), BiodentineTM (BD), EZ-sealTM (EZ), and OrthoMTA III (OM3). Methods: In a sample holder, 5 g of the powder sample was placed and the top surface of the material was packed flat using a sterilized glass slide. The prepared slides were mounted on an X-ray diffraction (XRD) instrument (D8 Advance; Bruker AXS GmbH, Germany). The X-ray beam 2θ angle range was set at 10~90° and scanned at 1.2° per minute. The Cu X-ray source set to operate at 40 kV and 40 mA in the continuous mode. The peaks in the diffraction pattern of each sample were analyzed using the software Diffrac (version 2.1). Then, the peaks were compared and matched with those of standard materials in the corresponding Powder Diffraction File (PDF-2, JCPDS International Center for Diffraction Data). A powder samples of the materials were analyzed using XRD and the peaks in diffraction pattern were compared to the Powder Diffraction File data. Results: Eight CSMs showed a similar diffraction pattern because their main component was calcium silicate. Eight CSMs showed similar diffraction peaks because calcium silicate was their main component. Two components were observed to have been added as radiopacifiers: bismuth oxide was detected in WMTA, OM, and EM while zirconium oxide was detected in RM, EN-Z, BD, EZ, and OM3. Unusual patterns were detected for the new material, OM3, which had strong peaks at low angles. Conclusion: It was caused by the presence of Brushite, which is believed to have resulted in crystal growth in a particular direction for a specific purpose.

ANTIMICROBIAL EFFECT OF ANTIBIOTICS AND ROOT CANAL CEMENTS ON THE PREDOMINANT PATHOGENIC ANAEROBIC MICROFLORA IN ROOT CANALS (근관내 주요 혐기성 병인균에 대한 수종 항생제와 근관충전용 세멘트의 항균효과에 관한 연구)

  • Bae, Kwang-Shik
    • Restorative Dentistry and Endodontics
    • /
    • v.18 no.2
    • /
    • pp.515-525
    • /
    • 1993
  • The purpose of this study was to evaluate the susceptibility of anaerobic microorganisms to certain antibiotics and root canal cements. Prevotella intermedia(Bacteroides intermedius) ATCC 25611(serotype A), Fusobacterium nucleatum ATCC 25586, Actinomyces viscosus ATCC 15987 which are the predominant pathogenic anaerobes in dental root canals were cultured in BHI for 48 hours(Fig.1). After each $200{\mu}l$ of those broths with microorganisms was streaked on each surface of blood agar plate, 2 to 5 antibiotic discs which are impregnated with Tetrncycline, Erythromycin, Ampicillin, Clindamycin, or Vancomycin were applied on each surface of blood agar plate and cultured for 5 days anaerobically in the anaerobic chamber (Fig.2). 15 antibiotic discs for each kind of antibiotics and each species of microorganisms were tested. Also each kind of root canal cement tubes which include Zinc oxide eugenol cement, Zinc phosphate cement, Calcium hydroxide powder+DD.W., Calcium hydroxide paste(Pulpdent Tempcanal), or Vitapex(Table 1) were applied on the inoculated BAPs after $200{\mu}l$ of each experimental species of microorganisms was streaked on the surface of blood agar plates, and they were cultured for 5 days anaerobically in the anaerobic chamber(Fig.3). The sensitivity(antimicrobial effect) was determined by the diameter of the inhibition zone. The results are as follows: 1. The results of antibiotic susceptibility test(Table 2) 1) All of the tested antibiotics had antimicrobial activity with various degrees. 2) In Prevotella intermedia (old Bacteroides intermedius), the diameter of inhibition zone to Erythromycin($37.87mm{\pm}2.20$) was largest, those to Tetracycline($26.20mm{\pm}2.96$), Vancomycin($21.53mm{\pm}1.96$), Clindamycin($18.73mm{\pm}0.96$) was smaller than former orderly, and That to Ampicillin ($7.87mm{\pm}0.83$) was smallest. 3) In Actinomyces viscosus, the diameter of inhibition zone to Erythromycin($28.73mm{\pm}1.22$) was largest, those to Ampicillin($21.73mm{\pm}1.03$), Clindamycin($21.33mm{\pm}1.59$) was similarly next order, that to Vancomycin($19.00mm{\pm}1.96$) was smaller than Clindamycin, and that to Tetracycline($11.93mm{\pm}0.70$) was smallest. 4) In Fusobacterium nucleatum, the diameter of inhibition zone to Ampicillin($31.07mm{\pm}1.91$) was largest, that to Erythromycin($28.87mm{\pm}0.92$), Clindamycin($20.47mm{\pm}1.51$), Vancomycin ($16.73mm{\pm}0.96$), Tetracycline ($12.13mm{\pm}1.06$) are smaller than former orderly. 2. The results of root canal cements and pastes(Table 3) 1) The external diameter of tube is 4mm, so 4mm of the inhibition zone diameter means non-susceptable. Prevotella intermedia (old Bacteroides intermedius) was non-susceptable to Calcium hydroxide powder+D.D.W., Calcium hydroxide paste(pulpdent Tempcanal), and Actinomyces viscosus was non-susceptable to Zinc phosphate cement, Calcium hydroxide powder + D.D.W., Calcium hydroxide paste(pulpdent Tempcanal). 2) In Prevotella intermedia (old Bacteroides intermedius), the diameter of inhibition zone to Zinc oxide eugenol cement($13.67mm{\pm}3.30$) was largest, that to Vitapex($9.20mm{\pm}2.96$), Zinc phosphate cement($6.13mm{\pm}2.07$) was smaller than former. 3) In Actinomyces viscosus, the diameter of inhibition zone to Zinc oxide eugenol cement($17.40mm{\pm}5.20$) was largest and that to Vitapex($8.80mm{\pm}1.70$) was next order. 4) In Fusobacterium nucleatum, the diameter of inhibition zone to Vitapex($42.33mm{\pm}17.2$) was largest and those to Calcium hydroxide paste(Pulpdent Tempcanal)($14.47mm{\pm}3.72$) and Zinc oxide eugenol cement($8.93mm{\pm}2.71$), Zinc phosphate cement($8.20mm{\pm}2.27$), Calcium hydroxide powder+D.D.W.($5.53mm{\pm}2.10$)was next orderly. And then In Zinc oxide eugenol cement and Zinc phosphate cement group, two of fifteen samples showed no inhibition zone, in Calcium hydroxide powder + D.D.W. group, 8 of 15 samples showed no inhibition zone.

  • PDF

The Changes of Natural Microflora in Liver Sausage with Kimchi Powder during Storages

  • Kim, Hyoun-Wook;Lee, Na-Kyoung;Oh, Mi-Hwa;Kim, Cheon-Jei;Paik, Hyun-Dong
    • Food Science of Animal Resources
    • /
    • v.31 no.6
    • /
    • pp.899-906
    • /
    • 2011
  • The objectives of this study were to apply the Baranyi model to predict the growth of natural microflora in liver sausage with added kimchi powder. Kimchi powder was added to the meat products at 0, 1, 2, and 3% levels. To determine and quantify the natural microflora in the meat products, total plate counts and counts of anaerobic bacteria and lactic acid bacteria were examined throughout the 28 d of storage. The obtained data were applied to the Baranyi growth model. The indices used for comparing predicted and observed data were $B_f$, $A_f$, root mean square error (RMSE), and $R^2$. Twelve predictive models were characterized by a high $R^2$ and small RMSE. The Baranyi model was useful in predicting natural microflora levels in these meat products with added kimchi powder during storage.

Push-out bond strength and intratubular biomineralization of a hydraulic root-end filling material premixed with dimethyl sulfoxide as a vehicle

  • Ju-Ha Park;Hee-Jin Kim;Kwang-Won Lee;Mi-Kyung Yu;Kyung-San Min
    • Restorative Dentistry and Endodontics
    • /
    • v.48 no.1
    • /
    • pp.8.1-8.8
    • /
    • 2023
  • Objectives: This study was designed to evaluate the parameters of bonding performance to root dentin, including push-out bond strength and dentinal tubular biomineralization, of a hydraulic bioceramic root-end filling material premixed with dimethyl sulfoxide (Endocem MTA Premixed) in comparison to a conventional powder-liquid-type cement (ProRoot MTA). Materials and Methods: The root canal of a single-rooted premolar was filled with either ProRoot MTA or Endocem MTA Premixed (n = 15). A slice of dentin was obtained from each root. Using the sliced specimen, the push-out bond strength was measured, and the failure pattern was observed under a stereomicroscope. The apical segment was divided into halves; the split surface was observed under a scanning electron microscope, and intratubular biomineralization was examined by observing the precipitates formed in the dentinal tubule. Then, the chemical characteristics of the precipitates were evaluated with energy-dispersive X-ray spectroscopic (EDS) analysis. The data were analyzed using the Student's t-test followed by the Mann-Whitney U test (p < 0.05). Results: No significant difference was found between the 2 tested groups in push-out bond strength, and cohesive failure was the predominant failure type. In both groups, flake-shaped precipitates were observed along dentinal tubules. The EDS analysis indicated that the mass percentage of calcium and phosphorus in the precipitate was similar to that found in hydroxyapatite. Conclusions: Regarding bonding to root dentin, Endocem MTA Premixed may have potential for use as an acceptable root-end filling material.

The Myths and Facts of MTA (MTA의 Myths & Facts)

  • Ko, Hyun-Jung
    • The Journal of the Korean dental association
    • /
    • v.48 no.11
    • /
    • pp.813-818
    • /
    • 2010
  • Since MTA has many beneficial properties such as biocompatibility, great sealing capacity, antibacterial effects, low cytotoxicity, and stimulation of formation of mineralized tissue, it has been widely used as the material of choice in root-end filling, apexification, pulpotomy, perforation repair and so on. However, despite its favorable characteristics, MTA presents working properties which are less than ideal. The resulting cement from the mixing of powder and water is difficult to manipulate, and its setting time has been reported to be 2 h 45 min whereas the working time is <4 minutes. Additional moisture is also required to activate the setting of the cement. Moreover, according to recent studies, the physical properties of MT A may be hampered by acidic environment or blood contamination. Therefore, practitioners may have surprisingly worse results than they expected when they are not fully acquainted with the characteristics and manipulation method of MTA.