• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.793-794
• /
• 2013

• Wind and Structures
• /
• 제32권2호
• /
• pp.161-167
• /
• 2021

In this study, the artificial neural network (ANN) method was used for estimating the monthly mean wind speed of Sivas, in the central part of Turkey. Eighteen years of wind speed data obtained from nine measurement stations during the period of 2000-2017 at 10 m height was used for ANN analysis. It was found that mean absolute percentage error (MAPE) ranged from 3.928 to 6.662, mean bias error (MBE) ranged from -0.089 to -0.003, while root mean square error (RMSE) ranged from 0.050 to 0.157 and R2 ranged from 0.86 to 0.966. ANN models provide a good approximation of the wind speed for all measurement stations, however, a tendency to underestimate is also obvious.

• 한국해양공학회지
• /
• 제34권3호
• /
• pp.167-179
• /
• 2020

Recently, the increasing importance of artificial intelligence (AI) technology has led to its increased use in various fields in the shipbuilding and marine industries. For example, typical scenarios for AI include production management, analyses of ships on a voyage, and motion prediction. Therefore, this study was conducted to predict a response amplitude operator (RAO) through AI technology. It used a neural network based on one of the types of AI methods. The data used in the neural network consisted of the properties of the vessel and RAO values, based on simulating the in-house code. The learning model consisted of an input layer, hidden layer, and output layer. The input layer comprised eight neurons, the hidden layer comprised the variables, and the output layer comprised 20 neurons. The RAO predicted with the neural network and an RAO created with the in-house code were compared. The accuracy was assessed and reviewed based on the root mean square error (RMSE), standard deviation (SD), random number change, correlation coefficient, and scatter plot. Finally, the optimal model was selected, and the conclusion was drawn. The ultimate goals of this study were to reduce the difficulty in the modeling work required to obtain the RAO, to reduce the difficulty in using commercial tools, and to enable an assessment of the stability of medium/small vessels in waves.

• 한국가금학회지
• /
• 제47권2호
• /
• pp.107-114
• /
• 2020

This study was conducted to investigate the variation in nutrient composition of oilseed meals and to develop prediction equations for amino acid concentrations. Energy and nutrient contents were determined in a total of 1,380 feed ingredient samples including copra byproducts, corn distillers, dried grains with solubles, palm kernel byproducts, and soybean meal. The ingredient samples were imported to the Republic of Korea between 2006 and 2015. Data were analyzed using the MIXED procedure of SAS. The regression procedure of SAS was used to generate the prediction equation for the lysine concentration using the crude protein (CP) concentration as an independent variable. The concentrations of moisture, gross energy, CP, ether extract, crude fiber, ash, calcium, phosphorus, lysine, methionine, cysteine, and threonine in tested oilseed meals differed (P<0.05) depending on producing countries. The prediction equations for amino acid concentrations (% as-is basis) in the oilseed meals are: lysine = -1.08 + 0.080 × CP (root mean square error = 0.244, R² = 0.924, and P<0.001); threonine = -0.297 + 0.044 × CP (root mean square error = 0.099, R² = 0.958, and P<0.001). In conclusion, energy and nutrient compositions vary in the oilseed meals depending on the producing countries. Moreover, the crude protein concentration can be used as a suitable independent variable for estimating lysine and threonine concentrations in the oilseed meals.

• 한국환경과학회지
• /
• 제22권5호
• /
• pp.581-589
• /
• 2013

Surface Image Velocimetry(SIV) is an instrument to measure water surface velocity by using image processing techniques. Since SIV is a non-contact type measurement method, it is very effective and useful to measure water surface velocity for steep mountainous streams, such as streams in Jeju island. In the present study, a surface imaging velocimetry system was used to calculate the flow rate for flood event due to a typhoon. At the same time, two types of electromagnetic surface velocimetries (electromagnetic surface current meter and Kalesto) were used to observe flow velocities and compare the accuracies of each instrument. The comparison showed that for velocity distributions root mean square error(RMSE) was 0.33 and R-squared was 0.72. For discharge measurements, root mean square error(RMSE) reached 6.04 and R-squared did 0.92. It means that surface image velocimetry could be used as an alternative method for electromagnetic surface velocimetries in measuring flood discharge.

• 한국항해학회지
• /
• 제21권3호
• /
• pp.67-74
• /
• 1997

This paper described the method and the result of making a dynamic fiber optic gyrocompass measuring the heading angles of ships by processing the output signal from a constant rotating fiber optic sensor and also showed the measurement to test the performance of our system. Considerig an economical view we designed and ordered a cheap medium grade fiber densors increased not fiber length but the diameter of a fiber sensing loop. The scale factor and noise was 267mV/deg/s and 2 deg/hr/$\sqrt{Hz}(1{\sigma})$, respectively. We made the dynamic fiber optic gyrocompass by this sensor. We measured the heading angles in an arbitrary direction to evaluate the accuracy of our system and the root mean square error was $0.4^\circ$. Moreover, we measured the angles ineach direction of $45^\circ$. successive rotation to know whether this system has distoritions in a specific direction or not and the root mean square error in this case was $0.5^\circ$.

• 한국통신학회논문지
• /
• 제23권6호
• /
• pp.1471-1481
• /
• 1998

본 논문에서는 비트 플레인 영생(bit-plane image)에서의 정합을 이용하여 디지털 영상 안정화를 수행하는 새로운 기법을 제안한다. 제안된 기법에서는 기존의 전역 탐색 알고리즘을 하나의 비트 플레인으로부터 추출한 이진 영상에 적용함으로써 움직임 추정에 소요되는 계산량을 줄이면서도 기존 방식들보다 우수한 웅직임 추정 성능을 갖도록 하였다. 더욱이 제안된 기법은 조도 변화를 고려하여 비트 플레인을 선정하는데 있어서 적응 기법을 적용함으로써 견고한 성능을 갖도록 하였다. Brute-force 방식을 기준으로 RMSE(root mean square error)를 이용하여 제안하는 방식과 기존의 방식들을 비교하였고, 실험 결과에서 제안하는 방식이 카메라의 움직임 벡터를 기존 방식들보다 정확하게 검출하고 있음을 확인하였다. 또한 제안하는 방식은 기존 방식들에 비해서 연산량이 작고, 보다 간단한 방식으로 디지털 영상 안정화를 수행하고 있다.

• 로봇학회논문지
• /
• 제12권1호
• /
• pp.26-32
• /
• 2017

Previous shape sensors including bend sensors and optic fiber based sensors are widely used in various applications including goniometer and surgical robots. But theses sensors have large nonlinearity, limited in the range of sensing curvature, and sometimes are expensive. This study suggests a new concept of bend sensor using cable-conduit which consists of the outer sheath and the inner wire. The outer sheath is made of helical coil whose length of the central line changes as the sheath bends. This length change of the central line can be measured with the length change of the inner cable. The modeling and the experimental results show that the output signal of the proposed sensor is linearly related with the bend angle of the sheath with root mean square error of 5.3% of $450^{\circ}$ sensing range. Also the polynomial calibration of the sensor can decrease the root mean square error to 2.1% of the full sensing range.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2016년도 학술발표회
• /
• pp.301-301
• /
• 2016

국내의 경우 수공구조물을 설계하기 위해서는 빈도해석을 통해 설계수문량을 산정한다. 일반적으로 실무에서는 지점빈도해석을 수행하게 되는데 설계빈도보다 대부분 짧은 기간의 자료를 이용하여 산정한다. 지역빈도해석은 이러한 자료기간이 가지는 문제점을 극복하기 위하여 확률수문량의 정확도와 신뢰도를 향상시키는 기법이다. 스케일 모델은 지속기간별로 관측된 강우자료를 이용하여 재현기간에 대한 지속기간의 함수로 표현이 가능하며, 이를 통해 강우의 IDF곡선을 제시할 수 있는 수학적 모델이다. 대상지역의 강우관측소에서 관측된 강우자료가 일단위이면, 기준지속기간이 24시간이 되며, 기준지속기간에 대한 확률강우량으로부터 임의의 지속기간에 대한 확률강우량을 스케일 모델을 이용하여 추정할 수 있다. 따라서 짧은 자료를 보유한 지역이거나 미계측 지역에 대한 확률강우량을 추정을 위해 지역빈도해석과 지역 스케일 모델을 이용하여 확률강우량을 추정하여 지점빈도해석과 비교하고자 한다. 본 연구를 위해 한강유역의 강우 관측소를 이용하였으며, 군집분석 중 k-means방법을 적용하여 수문학적 동질성을 확보한 후 지역을 구분하였다. 구분된 지역은 지점 및 지역빈도해석을 수행한 후 상대평균제곱근오차(relative root mean square error, RRMSE)를 비교하여 정확도를 판단하였고, 정확도가 높은 빈도해석에 지역 스케일 모델을 적용하여 미계측 지점에 대한 임의의 시간에 대한 확률강우량을 추정하고자 한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.837-839
• /
• 2014

레이다 시스템에서 3차원 궤적 정보는 목표물 추적을 위해 필수적이다. 이때 3차원 레이다는 수신 신호를 통해 방위각, 고각 및 거리를 추정하여 3차원 궤적 정보를 얻게 된다. 수신 신호에 따라 추정된 각도들과 거리는 오차를 가지게 되며 이 오차의 정도에 따라 3차원 레이다 시스템의 성능에 미치는 영향에 대한 분석이 요구되어진다. 본 논문에서는 3차원 레이다 시스템의 각도 및 거리 오차에 따라 추정된 3차원 궤적 정보와 실제 궤적 정보에 대해 RMSE (Root Mean Square Error)를 통해 성능을 분석한다.