• Journal of Biosystems Engineering
• /
• v.30 no.2 s.109
• /
• pp.102-109
• /
• 2005

Water consumption at the farm is up to 48 percent of water resource of South Korea while manufacturing industry's is only $9.6\%$. The area of arable land is 2,077,067 ha and 27 percent of it is used for growing fruits and vegetables using furrow or surface irrigation at the greenhouse. Surface irrigation at the greenhouse for fruits and vegetables has problems such as over watering and insufficient supply of water to the fine roots of the plant. However, the research on the new method of irrigation to save water usage is few. The characteristics of soil wetting was measured for using surface irrigation and underground trickle irrigation method where water was supplied at 10, 15, 20, and 25 cm beneath the surface ground. Followings are summary of this study. 1. The efficiency of underground trickle irrigation was expected to be as high as twice of surface irrigation such as drip watering or sprinkling. 2. This improvement could be possible by using less than $50\%$ of irrigation water than surface irrigation to supply similar amount of water near fine roots. 3. Surface irrigation causes soil compaction as deep as 20 cm below the surface ground which reduces soil porosity and root respiration ending up developing less fine roots. 4. Underground trickle irrigation can prevent overdamping in the greenhouse since it does not over wet the surface soil. At winter, the amount of agricultural chemical usage could be reduced since this irrigation method does not develop blight or crop disease from condensation of water vapor.

• Journal of Periodontal and Implant Science
• /
• v.31 no.4
• /
• pp.727-736
• /
• 2001

Dentinal hypersensitivity is one of the complicated symptom rather than a disease. It has special reaction or pain over uncovered root by heat, mechanical or chemical stimulations, which are normal with healthy teeth, The purpose of this study is to discover rather MS Coat (oxalate-containing pre-polymerized resin suspension) or Elmex gel(amine fluoride+sodium fluoride) is effective on hypersensitivity after periodontal treatment using NRS(Numerica1 Rating Scales), which it is useful for evaluating pain level. This study has been prepared in Dankook Dental Hospital with generally healthy adult who had been suffered from dentinal hypersensitivity after periodontal treatment. Divided in three groups with saline(control group), MS Coat(test 1 group) and Elmex gel(test 2 group). And then, following evaluations were made at the end of 1 minute, 1 week, 1 month and 3 months. 1. The sequence of higher frequency & severeness of hypersensitivity is water within $7^{\circ}C$, air stream & explorer. 2. As time goes on, 1 minute, 1 week, 1 month & 3 months, severeness of hypersensitivity scored lower with water, air stream and explorer. 3. With explorer, the differences among three groups as time had to seen. 4. With air stream, the sensitivity scored lower after 1min with MS Coat, Elmex, and saline sequence. As time goes on the sensitivity was lower with MS Coat and Elmex than saline, but there was no difference between MS Coat and Elmex. 5. With water in $7^{\circ}C$, the sensitivity was much decreasing with MS Coat and Elmex than saline, but there was no difference between MS Coat and Elmex. As the result, MS Coat and Elmex are effective on hypersensitivity caused by periodontal treatment.

• Journal of Periodontal and Implant Science
• /
• v.28 no.1
• /
• pp.187-191
• /
• 1998

Aplastic anemia is a disease characterized by general lack of bone marrow activity; It may affect not only the red blood cells but also the white blood cells and platelets, resulting in pancytopenia. Spontaneous gingival hemorrhage is present in some cases and it is related to the blood platelet deficiency. This case report presents the periodontal treatment of a patient with aplastic anemia. A 43-year-old female was referred for continuous gingival bleeding after periodontal treatment. Periodontal findings revealed generalized gingival imflammation, oozing of blood from gingival crevice, and it was diagnosed as adult periodontitis. Root planing and extraction of the upper left third molar with poor prognosis were put into operation after elevation of the platelet count with platelet transfusion. The extraction socket was sutured with 3-0 silk. Bleeding continued even after digital compression at the upper right second premolar, second molar, and left canine areas, which presented severe inflammation. Although platelets were transfused repeatedly, platelet count did not stay elevated since survival rate of the transfused platelets were low due to alloimmunization. Thrombin gauze packing was not effective. Bleeding ceased 3 days after treatment with transfusion of donor platelets. 20 days after the treatment, the gingiva was generally healthy except upper right second premolar and lateral incisor areas. The result of periodontal treatment was good, but bleeding control after treatment was troublesome. In the periodontal treatment of patient with aplastic anemia, elevation of the platelet count with platelet transfusion seems to be the best method for hemorrhage control.

• The korean journal of orthodontics
• /
• v.48 no.3
• /
• pp.133-142
• /
• 2018

Objective: The purpose of this study was to evaluate differences in three-dimensional (3D) morphology of the hard palate between Korean adults with and without mild-to-moderate obstructive sleep apnea (OSA) using cone-beam computed tomographic (CBCT) data. Methods: The protocol for the two-dimensional (2D) and 3D mathematical modeling was established by analyzing CBCT images of 30 adults with OSA and 30 matched controls without OSA, using MIMICS software. The linear and angular measurements were also determined using this software. The measurements were repeated for 30 palates, by the same operator, to assess reliability. Results: The palates of OSA patients were higher in the posterior part and narrower in the anterior-superior part than those of the control group (p < 0.05). The nasal cavities of patients with OSA were narrower (p < 0.05) than those of controls. The increasing angle of the first molar palatal root is a compensation of the upper dental arch to improve occlusion. However, for most palatal measurements, there were no significant differences between the OSA and control groups (p > 0.05). The results of 2D and 3D mathematical models were consistent for linear and angular measurements, indicating that 2D and 3D mathematical modeling of the palate is a reliable methodology. Conclusions: OSA is a multifactorial disease; the palates of adults with mild-to-moderate OSA do not have specific morphological features distinct from those of healthy controls.

• Journal of the Korean Dietetic Association
• /
• v.17 no.3
• /
• pp.229-242
• /
• 2011

The purpose of this study was to investigate the status of the safety system and safety education in institutional foodservices in the Changwon and Masan areas. The survey was conducted from February 1 to March 31, 2009 via questionnaires that were sent to 300 dietitians, and 142 dietitians responded. It was determined that most of the safety managers were 'dietitians (87.1%)', whereas facilities/equipment managers consisted of 'dietitians (45.7%)', 'department of facilities management in the organization (36.4%)' and 'outsourced company of facilities management (17.9%)'. Out of the 11 safety practices, seven safety practices showed less than 50% of total implementation ratio, which meant that the safety systems were not functioning properly. Except for 'non-skid shoes (85.9%)', other safety equipment was seldom used. The survey respondents recognized that safety education was very necessary (4.47 points); however, they responded so-so (3.46 points) to the question of whether or not the actual frequency and time spent on safety education were enough. The average time spent on safety education was 28 minutes 11 seconds. Regarding the difficulties in performing safety education, 'not many safety education materials and media (3.44 points)', 'not many varieties in the subjects and contents for safety education (3.40 points)', and 'not much organizational support on safety education (3.33 points)' showed higher scores than 'lack of education time due to workload (3.20 points)'. The following were cited as education materials that should be developed as it is currently difficult to obtain relevant information and data: 'root causes of musculoskeletal injury and preventive measures (15.8%)', 'healthcare and disease preventive exercises for employees who do simple and repetitive works (14.9%)', and 'instruction on safe handling of chemicals (12.7%)'

• Journal of dental hygiene science
• /
• v.15 no.2
• /
• pp.238-245
• /
• 2015

Dentinal hypersensitivity is a type of dental pain that occurs when various stimuli are applied to exposed dentin lesions. If the symptoms of dentinal hypersensitivity continue, the dentin is exposed and the hypersensitivity may become a periodontal disease or root caries due to bacterial infection. Therefore, the clinical goal of the present study is to reduce the pain of the patient suffering from dentinal hypersensitivity by developing antimicrobial hypersensitivity treatments and to improve oral hygiene. We prepared chlorhexidine, tetracycline, cetylpyridinium chloride, gallic acid loaded desensitizer by adding 0.1%, 0.5%, 1.0%, and 2.0% chlorhexidine, tetracycline, cetylpyridinium chloride, gallic acid to desensitizer (Micro Prime; Denville and Hurri Seal; Beutlich), and antibacterial effect, and cytotoxicity. The antibacterial test by using Staphylococcus aureus (SA. ATCC 6538, FDA 209) showed that the antibacterial effect of all experimental groups was significantly higher than that of control group (p<0.05). Cytotoxicity test by using agar diffusion assay indicated that Micro Prime showed mild toxicity, Hurri Seal showed severe toxicity and this cytotoxicity is supposed to be caused by one of desensitizer components showing weak antibacterial effect.

• Journal of Korean Neurosurgical Society
• /
• v.48 no.6
• /
• pp.501-505
• /
• 2010

Objective : This study was undertaken to compare the diagnostic performances of magnetic resonance imaging (MRI), MR myelography (MRM) and myelography in young soldiers with a herniated lumbar disc (HLD). Methods : Sixty-five male soldiers with HLD comprised the study cohort. A visual analogue scale for low back pain (VAS-LBP), VAS for leg radiating pain (VAS-LP), and Oswestry disability index (ODI) were applied. Lumbar MR, MRM, and myelographic findings were checked and evaluated by four independent radiologists, respectively. Each radiologist was asked to score (1 to 5) the degree of disc protrusion and nerve root compression using modified grading systems devised by the North American Spine Society and Pfirrmann and the physical examination rules for conscription in the Republic of Korea. Correlated coefficients between clinical and radiological factors were calculated. Interpretational reproducibility between MRI and myelography by four bases were calculated and compared. Results : Mean patient age was $20.5{\pm}1.1$. Mean VAS-LBP and VAS-LP were $6.7{\pm}1.6$ and $7.4{\pm}1.7$, respectively. Mean ODI was $48.0{\pm}16.2%$. Mean MRI, MRM, and myelography scores were $3.3{\pm}0.9$, $3.5{\pm}1.0$, and $3.9{\pm}1.1$, respectively. All scores of diagnostic performances were significantly correlated (p < 0.05). However, none of these scores reflected the severity of patients' symptoms. There was no statistical difference of interpretational reproducibility between MRI and myelography. Conclusion : Although MRI and myelography are based on different principles, they produce similar interpretational reproducibility in young soldiers with a HLD. However, these modalities do not reflect the severity of symptoms.

• Journal of the Korean Professional Engineers Association
• /
• v.2 no.6_7
• /
• pp.12-23
• /
• 1969

The purpose of this study is to find out the reasonable amount of evapo-transpiration required for the paddy rice plant during the whole growing season. So, on the basis of the 3year experimental data concerning the evapo-transpiration from 1966 to 1968, the author obtained the following results. 1) The leaf area index in the densely planted plot is generally higher than that in the conventionally planted one during the first half of growing season. So, the coefficient of transpiration in the former plot is some what higher than in the latter, and the coefficient of water surface evaporation under the plant cover has the inverse relation between both plots. 2) It is unreasonable that coefficient of evapo-transpiration is applied to the calculation of the evapo-transpiration requirments of each growing stage, because a certain degree of variation in meteorological factors and in the thickness of the plant growth is involved in it. 3) It is most reasonable that the rate of transpiration and of the water surface evaporation is applied to the calculation of the transpirated amount and evaporated one in each growing stage because it shows almost constant value in spite of any meteorological conditions in so far as the variety of rice, planted density and control of applying fertilizer are same and the disease and blight are negligible. 4) The ratio of the amount of transpiration to the weight of the whole air dried yields has the tendency of decreasing as that of the yields increase, having almost constant value despite the amount of pan evaporation; and the value is about 210 when the weight of root parts is included to that of the yields. 5) Although the required amount of transpiration during the whole growing season can be calculated with the above ratio, fig. 7 showing the relation between the amount of transpiration and the weight of the yields is more reasonable and will be convinient to find it. And the requirements of water surface evaporation during the same season can also be directly found with the weight of air dried straw refering to fig.8.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.12
• /
• pp.1605-1613
• /
• 2010

Twenty-nine P. polymyxa strains isolated from rhizospheres of various crops were clustered into five genotypic groups on the basis of BOX-PCR analysis. The characteristics of several plant growth-promoting factors among the isolates revealed the distinct attributes in each allocated group. Under gnotobiotic conditions, inoculation of pepper roots with P. polymyxa isolates significantly increased the biomass in 17 of total 29 treated plants with untreated plants. Experiments on induced systemic resistance (ISR) against bacterial spot pathogen Xanthomonas axonopodis pv. vesicatoria in pepper by P. polymyxa strains were conducted and only one isolate (KNUC265) was selected. Further studies into ISR mediation by the KNUC265 strain against the soft-rot pathogen Erwinia carotovora subsp. carotovora in tobacco demonstrated that the tobacco seedlings exposed to either bacterial volatiles or diffusible metabolites exhibited a reduction in disease severity. In conclusion, ISR and plant growth promotion triggered by P. polymyxa isolates were systemically investigated on pepper for the first time. The P. polymyxa KNUC265 strain, which elicited both ISR and plant growth promotion, could be potentially used in improving the yield of pepper and possibly of other crops.

• Journal of Periodontal and Implant Science
• /
• v.31 no.3
• /
• pp.531-542
• /
• 2001

Periodontal debridement is most important procedure in periodontal treatment, because periodontal disease is the biofilm infection. The use of ultrasonic instrument has many clinical advantages compared to classical hand instrument. The introduction of newly developed ultrasonic scaler tips made the use of ultrasonic scaler popular. However the study of tooth substance removal according to the working parameters of ultrasonic scaler with newly developed tips is not sufficient. The purpose of this study is to evaluate the effects of working parameters of piezoelectric ultrasonic scaler with curette tip on casting gold removal. The working parameters was standardized by the sledge device which controls lateral force(0.5 N, 1.0 N, 2.0 N) and power setting was adjusted 2, 4, 8 in P mode and S mode and instrumentation time was 5 seconds. The defect depth and width were measured with profile meter and defect surface was examined by SME. The depth of defect was significantly large in S mode( $39.58{\pm}19.35{\mu}m$) compared to P mode( $8.37{\pm}6.98{\mu}m$). There was significant decrease of depth of defect between 1.0N($32.87{\pm}27.18{\mu}m$) and 2.0N( $14.86{\pm}15.04{\mu}m$). The area of defect was also significantly large in S mode($4482.42{\pm}3551.71{\mu}m^2$) compared to P mode( $922.06{\pm}960.32{\mu}m^2$). There was significant decrease of area of defect between 1.0N($3889.12{\pm}3936.00{\mu}m$) and 2.0N( $974.66{\pm}986.01{\mu}m$). The change of mode did not effect on the width of the defect. The change of power setting did not effect on the depth, width, and area of defect. In spite of limitation of this study it could be concluded that the use of piezoelectric ultrasonic scaler with curette tip on S mode could make significant tooth substance loss.