• 제목/요약/키워드: root development

검색결과 2,148건 처리시간 0.028초

최대 엔트로피 방법을 이용한 비선형 불규칙 파고의 확률분포함수 (Probability Distribution of Nonlinear Random Wave Heights Using Maximum Entropy Method)

  • 안경모
    • 한국해안해양공학회지
    • /
    • 제10권4호
    • /
    • pp.204-210
    • /
    • 1998
  • 최대 엔트로피 방법을 이용하여 강한 비정규분포과정의 특성을 갖는 비선형 불규칙 파고의 확률밀도 함수를 유도하였다. 파랑의 파고가 쇄파고(또는 수심)에 의해 제한되고 파고의 1, 2차 모멘트만 주어졌을 경우, 유도된 확률밀도함수는 $H_{b}$ (쇄파고), $H_{m}$(평균파고), $H_{rms}$(파고의 제곱평균평방근)의 매개변수로 폐합형(closed form)으로 표시된다. 파고의 3차 이상의 모멘트가 주어진 경우에는 최대 엔트로피를 갖는 확률밀도함수의 매개변수를 구하기 위해서 비선형 적분 방정식 계를 Newton-Raphson 방법을 이용하여 수치적으로 구하였다. 최대 엔트로피 방법을 이용하여 유도된 파고의 확률밀도함수를 비정규분포의 특성이 강한 실측자료와 비교하였다. 실측자료는 폭풍시 중간수심과 천해에서 측정된 쇄파고에 가까운 자료로서 강한 비선형 불규칙 파랑의 특성을 지니며, 이 경우에도 유도된 확률밀도함수가 측정된 파고의 막대그래프와 잘 일치하였다. 강한 비선형 불규칙파의 특성을 갖는 파랑의 파고일 경우에도 파고의 1, 2차 모멘트만으로도 파고의 분포를 잘 나타낼 수 있었다. 최대 엔트로피 방법을 이용하여 구해진 파고의 확률분포함수는 해안구조물의 설계파를 결정하는 극치파고분포와 파고의 통계적인 특성을 추정하는데 매우 유용하게 이용될 수 있다.

  • PDF

진주조의 파종전 침종 및 파종심도가 휴면타파와 출아에 미치는 영향 (Effects of Pre-sowing Seed Soaking and Planting Depth on Dormancy Breaking and Seedling Emergence of Pearl Millet (Pennisetum americanum(L.) Leeke))

  • 최병한;박근용;박래경
    • 한국작물학회지
    • /
    • 제34권1호
    • /
    • pp.81-85
    • /
    • 1989
  • 진주조 재배에서 가장 중요한 재배기술의 하나는 파종직후 신속, 균일하게 출아시켜 건강하게 자라도록 해주면서 단위면적당 입모주수를 확보하는데 있다. 본 시험은 진주조의 파종전 침종 및 파종심도가 종자의 휴면타파, 발아 및 출아에 미치는 영향을 구명하기 위하여 1985~87년 실시한 시험결과는 다음과 같다. 1. 진주조는 1$0^{\circ}C$에서 발아하지 못하고 11$^{\circ}C$에서 발아가 가능하였다. 휴면이 타파되지 않은 종자가 타파된 종자는 .$H_2O$$_2$ 1% 용액에서 24시간 침종한 후 순수한 맑은 물에 행군 다음, 종자표면에 물기가 없도록 말려서 파종할 때 99~100% 발아하였다. 종실수확 직후 순수한 맑은 물에 휴면중인 종자를 24시간 침종후 파종할 때 38% 밖에 발아되지 않았고 수종 1개월후에도 83% 밖에 발아되지 않았다. 2. 발아최저온도와 일평균기온에 의한 진주조 파종기 상측에서 발아최저온도 12$^{\circ}C$에 도달한 4월 하순~5월 하순이 파종초한기였고 안전한 파종기는 5월 중순이었다. 3. 적습토양조건에서 출아에 적합한 파종심도는 2cm이었으며 건조한 토양건조에서는 4~6cm이었다. 파종심도가 깊을수록 지중경은 길어졌으며 근관도 깊게 위치하였다. 지중경장과 근과깊이는 파종심도와 높은 정의 상관관계에 있으므로 너무 깊게 파종하면 불정근과 분벽발달이 저해됨을 알 수 있었다.

  • PDF

인버스 모델링을 이용한 지표면 이산화탄소 플럭스 추정 향상을 위한 항공기 관측 이산화탄소 자료동화 체계 개발 (Development of the Aircraft CO2 Measurement Data Assimilation System to Improve the Estimation of Surface CO2 Fluxes Using an Inverse Modeling System)

  • 김현정;김현미;조민광;박준;김대휘
    • 대기
    • /
    • 제28권2호
    • /
    • pp.113-121
    • /
    • 2018
  • In order to monitor greenhouse gases including $CO_2$, various types of surface-, aircraft-, and satellite-based measurement projects have been conducted. These data help understand the variations of greenhouse gases and are used in atmospheric inverse modeling systems to simulate surface fluxes for greenhouse gases. CarbonTracker is a system for estimating surface $CO_2$ flux, using an atmospheric inverse modeling method, based on only surface observation data. Because of the insufficient surface observation data available for accurate estimation of the surface $CO_2$ flux, additional observations would be required. In this study, a system that assimilates aircraft $CO_2$ measurement data in CarbonTracker (CT2013B) is developed, and the estimated results from this data assimilation system are evaluated. The aircraft $CO_2$ measurement data used are obtained from the Comprehensive Observation Network for Trace gases by the Airliner (CONTRAIL) project. The developed system includes the preprocessor of the raw observation data, the observation operator, and the ensemble Kalman filter (EnKF) data assimilation process. After preprocessing the raw data, the modeled value corresponding spatially and temporally to each observation is calculated using the observation operator. These modeled values and observations are then averaged in space and time, and used in the EnKF data assimilation process. The modeled values are much closer to the observations and show smaller biases and root-mean-square errors, after the assimilation of the aircraft $CO_2$ measurement data. This system could also be used to assimilate other aircraft $CO_2$ measurement data in CarbonTracker.

CPS를 위한 Blended Learning 프로그램 개발 - 고등학교 수학내용을 중심으로 - (Development of Blended Learning Program for CPS)

  • 김영미;김향숙;임선우
    • 한국수학교육학회지시리즈E:수학교육논문집
    • /
    • 제20권3호
    • /
    • pp.407-423
    • /
    • 2006
  • 창의성이 21세기의 중요한 화두로 등장하게 된 것은 국제화, 세계화, 지식정보화 등으로 불리는 현재의 우리 생활 전반에 관련된 많은 문제들을 해결하는 중요한 역할을 하고 있기 때문이다. 그러나 기존의 창의성을 연구해온 학자들은 창의성의 필요성을 훨씬 내면적이고 근본적인 이유를 들어 설명한다. 즉, 창의성을 발현하고 창의적 산물을 내는 등의 창의적인 활동들은 삶의 의미를 발견할 수 있는 근원이며, 창의적인 자원을 통해서 개인의 내면세계를 외부에 표출함으로써 개인의 삶이 중요한 의미를 지니기 위해 필요한 일련의 활동들이라 할 수 있다. 이 같은 시대적, 교육적인 흐름에 부응하기라도 하듯 최근 창의성에 대한 연구가 활발해지면서 교육과 훈련을 통해 창의성의 계발 및 증진이 가능하다는 결과들이 나오고 있으며, 어떤 방법을 통해 창의성을 어떻게 키울 것이냐에 더 많은 초점을 두고 관련된 연구들이 많이 이루어지고 있다. 이러한 선행연구들을 고찰해 본 결과, 창의성에 관한 최근 연구 이슈는 창의적인 교육방법 및 행동변인들에 관한 연구들로 전환이 되고 있음을 알 수 있었다. 특히, 창의적 교육방법과 프로그램 그리고 교실분위기와 교사변인으로 창의성 교육에 관련된 주제가 선택되어진다. 이는 과거 개념적인 연구에서 실제로 창의성을 신장시킬 수 있는 교육방법과 효과에 관한 연구로의 전환이 이루어지고 있음을 말한다. 이에 본 연구에서는 고등학생들의 수학 창의적 문제해결력을 위해 교과와 관련된 Blended Learning 프로그램을 개발하고자 한다.

  • PDF

Partial pulpotomy를 이용한 미성숙 영구치의 치수 치료 : 증례 보고 (THE PULP TREATMENT OF IMMATURE PERMANENT TEETH USING PARTIAL PULPOTOMY)

  • 노승철;김용수;김정욱;장기택;한세현
    • 대한소아치과학회지
    • /
    • 제26권4호
    • /
    • pp.616-622
    • /
    • 1999
  • 치수치료의 주요한 목적은 구강조직의 본래의 건강을 유지하는 것이며, 치수치료 시 가장 중요하고 어려운 점은 치수조직의 건강상태 또는 염증의 정도를 결정함으로써 최선의 치료방법을 결정하는 것이다. 미성숙 영구치는 풍부한 혈류 공급으로 다양한 손상에 성공적으로 반응하게끔 치수의 능력을 향상시킴으로써 많은 치수치료 술식을 위한 좋은 조건을 가지고 있다. 기저재(base) 또는 이장재(liner), 간접 치수복조술, 직접 치수복조술, 그리고 치경부 치수절단술을 포함한 여러 종류의 보존적인 치수치료가 미성숙 영구치를 위해 추천되어 왔다. 근래에는 외상으로 인하여 치수노출된 영구절치를 치료하는데 있어 주로 제시된 부분 치수절단술(partial pulpotomy)이 우식으로 인해 치수노출된 영구대구치를 치료하는 또 다른 술식으로 제안되고 있다. 부분 치수절단술 후 치아가 다음의 criteria를 만족시킬 때 치유가 되었다고 결론지었다. 1. 임상적 무증상 2. dentin bridge 형성의 방사선학적 증거 3. 방사선상에 치수내 또는 치근단 병소가 없다는 증거 4. 지속적인 치근 발육과 미성숙 치아의 치근첨 형성 5. 성숙된 치아에서 정상적인 상아질의 축적 6. 전기치수검사에서 양성 반응 이에 저자는 미성숙 영구치에서 우식 또는 외상으로 인한 치수노출시 부분 치수절단술을 행하여 양호한 결과를 얻었기에 이를 보고하는 바이다.

  • PDF

신경모세포종의 화학 및 방사선요법이 치아우식활성도에 미치는 영향 (THE EFFECTS OF CHEMORADIATION THERAPY FOR NEUROBLASTOMA ON DENTAL CARIES ACTIVITY)

  • 이지현;박기태;성기웅;김지연
    • 대한소아치과학회지
    • /
    • 제37권3호
    • /
    • pp.352-358
    • /
    • 2010
  • 소아암 환자의 치료 방법으로 주로 사용되는 항암화학요법이나 방사선요법이 구강 건강에 미치는 영향은 매우 크다. 구강점막염, 타액 분비율의 변화, 구강내 감염을 야기할 수 있고, 부분무치증, 왜소치, 치근 발육이상, 저석회화증이 나타날 수 있다. 본 연구는 신경모세포종으로 치료 받은 환아들에 있어 항암치료가 치아우식증 발생 위험도에 어떠한 영향을 미치는지 알아보기 위해 실시되었다. 삼성서울병원 소아청소년과에 신경모세포종으로 내원하여 화학 및 방사선치료요법을 받은 환아들을 대상으로 Dentocult$^{(R)}$ SM, Dentobuff$^{(R)}$ Strip을 이용하여 항암치료 후의 타액 분비율, 타액 완충능, 타액 내의 Streptococcus mutans 수를 알아보고 정상 어린이들의 결과와 비교하였으며, 신경모세포종 환아에서 처음 치료를 시작한 나이, 치료 종결 후 경과 시간에 따라 치아우식활성도가 어떻게 달라지는지에 대해서도 알아보았다. 그 결과 타액 분비율은 환아가 대조군에 비해 유의성 있게 낮은 결과를 보인 반면(p<0.05), 타액 완충능과 Streptococcus mutans 수는 환아와 대조군 간에 유의성 있는 차이를 보이지 않았다. 환아에서 치료를 시작한 나이나 치료 종결 후 경과 시간에 따른 치아우식활성도에서도 통계적 유의차는 없었다.

Validation of Sea Surface Temperature (SST) from Satellite Passive Microwave Sensor (GPM/GMI) and Causes of SST Errors in the Northwest Pacific

  • Kim, Hee-Young;Park, Kyung-Ae;Chung, Sung-Rae;Baek, Seon-Kyun;Lee, Byung-Il;Shin, In-Chul;Chung, Chu-Yong;Kim, Jae-Gwan;Jung, Won-Chan
    • 대한원격탐사학회지
    • /
    • 제34권1호
    • /
    • pp.1-15
    • /
    • 2018
  • Passive microwave sea surface temperatures (SST) were validated in the Northwest Pacific using a total of 102,294 collocated matchup data between Global Precipitation Measurement (GPM) / GPM Microwave Sensor(GMI) data and oceanic in-situ temperature measurements from March 2014 to December 2016. A root-mean-square (RMS) error and a bias error of the GMI SST measurements were evaluated to $0.93^{\circ}C$ and $0.05^{\circ}C$, respectively. The SST differences between GMI and in-situ measurements were caused by various factors such as wind speed, columnar atmospheric water vapor, land contamination near coastline or islands. The GMI SSTs were found to be higher than the in-situ temperature measurements at low wind speed (<6 m/s) during the daytime. As the wind speed increased at night, SST errors showed positive bias. In addition, other factors, coming from atmospheric water vapor, sensitivity degradation at a low temperature range, and land contamination, also contributed to the errors. One of remarkable characteristics of the errors was their latitudinal dependence with large errors at high latitudes above $30^{\circ}N$. Seasonal characteristics revealed that the errors were most frequently observed in winter with a significant positive deviation. This implies that SST errors tend to be large under conditions of high wind speeds and low SSTs. Understanding of microwave SST errors in this study is anticipated to compensate less temporal capability of Infrared SSTs and to contribute to increase a satellite observation rate with time, especially in SST composite process.

STUDIES ON THE TISSUE CULTURE OF PANAX GINSENG

  • Harn C
    • 고려인삼학회:학술대회논문집
    • /
    • 고려인삼학회 1974년도 학술대회지
    • /
    • pp.9-22
    • /
    • 1974
  • Unlike the tissue culture in animals and human being, in higher plants various parts of the plant are cultured for varied purposes, and they are named variously depending on which parts are used as explants or what purposes they are cultured for. Followings are some of the names of culture used frequently: organ culture, tissue culture, callus culture, single cell culture, meristem culture, mericlone culture, ovary culture, ovule culture, embryo culture, endosperm culture, anther culture, pollen culture, protoplast culture, etc.. As the names of the culture indicate, in some kinds of culture the explants used for culture are actually not tissues, but organs, single cells, or protoplasts. It seems, however, convenient to call all of the above-mentioned cultures grossly as tissue culture. Several kinds of tissue culture were attempted using Panax ginseng as material and some of the results were summarized below. 1. Callus culture After dormancy of the sed was broken, whole embryo or parts (hypocotyl, cotyledon and epicotyl) of partly grown embryo were cultured in the media supplemented with growth regulators. Rapid swelling occurred in a few weeks, but most of the swelling was observed only in the basal part of epicotyl, changes in the other parts of embryo appearing in much later stages. The swelling or increase in size, however, was resulted not from the divisions of cells, but from the mere expansion of cell. Real calli were formed about two months after inoculation of explants. Callus tissues developed from cortex, pith, and vascular bundle in the cases of hypo- and epicotyl, from mesophyl tissue in the case of cotyledon. Shoots developed more easily from cotyledons regardless of whether they are detached from or attached to the embryo proper. 2. Culture in the Knudson C medium When cotyledons, detached from or attached to the embryo proper, were cultured in the growth regulator-free Knudson C medium comprision only several kinds of mineral compounds and sucrose, shoot primordium or callus developed profusely and finally plantlets were produced directly from shoot primordium or indirectly through callus. In this medium epidermal cells as well as mesophyl cells of the cotyledon became meristematic and divided, changing into multinucleate cells or multicellular bodies, developing eventually into either shoot primordia or calli. 3. Anther culture Anthers were cultured in the media supplemented with various growth regulators applied singly or in combinations. Callus was formed mostly in the connective tissue of anther. Cells of anther wall layers changed in appearance, but no division occurred. Microspores of all stages in development were not changed, ruling out the possibility that microspore-originated callus might be formed. 4. Isolation of protoplast Protoplasts were isolated from young root, leaf, and epicotyl, using 0.7M D-mannitols as osmoticum and using macerozyme and cellulase respectively for maceration and digestion of the cell wall. Production in large number of naked intact protoplast was rather difficult as compared with other plant species. Fusion of protoplasts occurred infrequently mainly due to the fewer number of naked protoplasts in the solution.

  • PDF

TREC기법을 이용한 초단기 레이더 강우예측의 도시유출 모의 적용 (Application of Very Short-Term Rainfall Forecasting to Urban Water Simulation using TREC Method)

  • 김종필;윤선권;김광섭;문영일
    • 한국수자원학회논문집
    • /
    • 제48권5호
    • /
    • pp.409-423
    • /
    • 2015
  • 본 연구에서는 기상레이더 자료를 이용하여 도시하천 유역을 대상으로 초단기 강우예측 및 홍수예측을 실시하였다. 초단기 강우예측 결과 선행시간이 증가함에 따라 관측 자료와의 상관계수가 감소하며, 평균제곱근오차는 증가하여 정확도가 감소하였으나, 선행시간 60분까지 상관계수가 0.5이상 유지되는 결과를 얻을 수 있었다. 또한 강우예측 자료 적용에 의한 도시유출 분석결과, 선행시간 증가에 따른 첨두유량과 유출체적의 감소가 발생하였으나, 첨두시간은 비교적 일치하는 것으로 분석되었다. 레이더 예측 강우 적용을 통한 도시유출 분석결과, 관측 자료와의 오차가 발생하나 이는 여러 가지 외부적인 요인으로 판단되며, 추후 강수 에코의 급격한 생성과 소멸현상 모의, 국지성 강우 예측 성능 향상 등 지속적인 알고리즘 개선과 강우-유출 모형 매개변수 검 보정이 필요할 것으로 사료된다. 본 연구의 결과는 도시하천 유역뿐만 아니라 관측이 어려운 미계측 지역의 수문자료 확보 및 실시간 홍수 예 경보시스템 구축에 확장이 가능하며, 다양한 관측자료 기반 Multi-Sensor 초단기 강우예측 기반기술로의 활용이 가능하다.

관성측정장치를 이용한 보행거리 측정 시스템 개발 (Development of Gait Distance Measurement System Based on Inertial Measurement Units)

  • 이기혁;강신일;조재성;임도형;이종실;김인영
    • 재활복지공학회논문지
    • /
    • 제9권2호
    • /
    • pp.161-168
    • /
    • 2015
  • 본 논문은 자체 개발한 관성측정장치의 가속도, 각속도, 지자기계 데이터를 이용하여 보행거리를 측정하는 시스템 개발에 관한 것이다. 관성센서들의 오프셋 및 이득 오차를 최소화하기 위하여 9축의 자유도를 갖는 지그를 제작하였으며, 이를 이용하여 캘리브레이션을 수행하였다. 보행거리의 정확한 측정을 위하여, 기울기 하강법을 이용하여 가속도계의 중력성분 제거 및 보행패턴 분석을 통한 드리프트 성분을 제거하였다. 최종적으로 보정된 가속도 데이터의 이중적분을 통하여 보행거리를 측정하였다. 시스템의 성능 평가를 위하여, 실내 직선 10m 직선 보행에 대하여 캘리브레이션 전, 후 오차 개선 비율를 비교하였으며, 간단한 보행에 대해 Vicon과의 비교 실험을 수행하였다. 직선 보행에 대해서는 x, y, z축 각각에 대하여 $31.4{\pm}14.38%$(mean${\pm}$S.D.), $78.64{\pm}10.84%$$69.71{\pm}26.25%$ 개선이 되었음을 확인하였으며, Vicon과의 비교 실험 결과 x, y, z축 각각에 대하여 0.1m, 0.16m, 0.12m의 오차를 얻을 수 있었다.

  • PDF