• Korean Journal of Medicinal Crop Science
• /
• v.22 no.4
• /
• pp.295-300
• /
• 2014

This study was carried out to produce more Parasenecio firmus in forest farming. In order to achieve this purpose, it was surveyed the growth and photosynthetic characteristics of P. firmus. Relatively light intensity was controlled by 100%, 60%, 30% and 5% of full sunlight. Height was the highest under 5% of full sunlight. Shoot diameter was the highest in full sunlight. Fresh weight (leaf, stem, root and total) and dry weight (leaf, root and total) were the highest under 30% of full sunlight. S (leaf+stem)/R (root) ratio was the lowest under 30% of full sunlight and the highest under 5% of full sunlight. In leaf characteristics, leaf area, SLA and LAR were getting higher in the lower light level and the highest under 5% of full sunlight ($176.1cm^2$, $420.5cm^2{\cdot}g^{-1}$ and $123.5cm^2{\cdot}g^{-1}$). Especially, leaf area was surveyed higher under 30% of full sunlight in the next. Leaf thickness was getting lower in the lower light level and the lowest under 5% of full sunlight (overall 0.14~0.24 mm). As a result of surveying the whole experiment, P. firmus grows well under 30% and 5% of full sunlight in forest farming.

• Food Science and Preservation
• /
• v.12 no.5
• /
• pp.465-469
• /
• 2005

Allium fistulosum L. seasoning oils were manufactured by autoclaving method. Materials were from total, leaf, trunk and root part of Allium fistulosum L. with refined soybean oil. Physicochemical characteristics of these Allium fistulosum L. seasoning oils of 4 kinds were not much different, but seasoning oil from leaf part was more green color. Total 35 volatile components were detected, in which propenyl trisulfide and propenyl propyl trisulfide were the major components. They were found as 26.94 ppm and 26.26 ppm in seasening oil from root with the highest level, respectively. Propenyl propyl disulfide was the major component as flavor characteristics in Allium fistulosum L. seasoning oils. Main component of original roasted flavor in Allium fistulosum L. seasoning oils would be confirmed the root part.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.10
• /
• pp.1649-1655
• /
• 2013

This study is conducted to investigate the quality characteristics of kimchi with added Allium hookeri root (AHR) during a 56-day fermentation process at $4^{\circ}C$. AHR was added to salted cabbage at concentrations of 0, 5, 10, and 20% (w/w). The quality characteristics of the kimchi with added AHR were determined by measuring pH, acidity, salinity, reducing sugar, microbial amounts, and sensory evaluation. AHR had a higher level of crude lipid and potassium than other kinds within the Allium family. All kimchi with added AHR gradually decreased in the pH level compared to Baechu kimchi until 2 weeks, and kept a higher level of pH than Baechu kimchi until 8 weeks. Salinity showed a range of 1.87~2.43% over 8 weeks. The reducing sugar content showed no difference between all kimchi. In sensory evaluations, overall acceptance, taste and texture were highest in kimchi with added 10% AHR.

• Explosives and Blasting
• /
• v.19 no.1
• /
• pp.71-84
• /
• 2001

Korean peninsula has the most mountainous areas such as mountains and hilly country, and it is surrounded by the sea on all sides but one. In this respect, a large scaled construction works have frequently been conducted. However, it is not easy to porform a large scale blasting work without giving any harm to houses or facilities nationwide. Therefore, blasting work becomes more closely related to maintenance thing due to the development of the downtown or a large structure for key facilities. Many researches on blast in the open space and tunnel blasting have been conducted. On the contrary, research on underwater blasting operations is comparatively scanty even though much more necessity of marine development is required. In this respect, this study aims to investigate the characteristics of underwater blasting operations and to make a comparative study with blast in the open space. As a result of examining into the characteristics during underwater blasting operations, the around oscillation in case of underwater blasting operations shows significantly low compared to that in case of blast in the open space, and this means that much more cautious altitude must be taken in designing underwater blasting operations compared to the design of blast In the open space. As a result of analysis on the difference between a square root and a cube root In the equation of estimating oscillations in the actual site, it is shown that it is shown to apply a square root for the estimation of oscillation at 60 meters in case of underwater blasting operations and at 22 meters case of general blast in the open space.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.5
• /
• pp.395-399
• /
• 2015

Background : This study examined the effect of harvesting time on the growth, yield characteristics, and major beneficial components in Salvia miltiorrhiza. Methods and Results : Although plant height, stem diameter and branch length were not affected by harvesting time, the number of stems was highest when harvested in mid October. There were no differences in root length and thickness, however, the rhizome was thicker when it was harvested at the end of October or early November than when it was harvested in early and mid October. The dried root weight also showed a similar pattern. However, there was a statistically significant increase to 408 kg (16%) in the rhizome weight when in late October and a rise to 455 kg (29%) when harvested in early November. Harvest time had little effect on the content of the major component of S. miltiorrhiza. For example, salvianolic acid content rose from 9.42 to 9.64% with later harvest times, and tanshinone ${\prod}A$ content was tended to be slightly more increased in mid October which S. miltiorrhiza has 0.22% tanshinon ${\prod}A$ than in early October. Conclusions : According to these results, the optimum harvest time for S. miltiorrhiza is early November when plant or major component yields are hightest. There were no significant harvest time effects on the major beneficial components.

• Restorative Dentistry and Endodontics
• /
• v.47 no.1
• /
• pp.10.1-10.11
• /
• 2022

Objectives: This study aimed to investigate the color stability, solubility, and surface characteristics of 3 calcium silicate-based cements (CSCs) after immersion in different solutions. Materials and Methods: ProRoot white mineral trioxide aggregate (MTA), Biodentine, and Endosequence Root Repair Material (ERRM) were placed in cylindrical molds and stored at 37℃ for 24 hours. Each specimen was immersed in distilled water, 5% sodium hypochlorite (NaOCl), 2% chlorhexidine, or 0.1% octenidine hydrochloride (OCT) for 24 hours. Color changes were measured with a spectrophotometer. Solubility was determined using an analytical balance with 10^-5 g accuracy. The surface characteristics were analyzed using scanning electron microscopy and energy-dispersive spectroscopy. Data were analyzed using 2-way analysis of variance, the Tukey test, and the paired t-test. Results: MTA exhibited significant discoloration in contact with NaOCl (p < 0.05). White precipitation occurred on the surfaces of Biodentine and ERRM after contact with the solutions, and none of the materials presented dark brown discoloration. All materials showed significant solubility after immersion in the solutions (p < 0.05), irrespective of the solution type (p > 0.05). The surface topography and elemental composition of the samples showed different patterns of crystal formation and precipitation depending on the solution type. Conclusions: All materials presented some amount of solubility and showed crystal precipitation after contact with the solutions. Biodentine and ERRM are suitable alternatives to ProRoot MTA as they do not exhibit discoloration. The use of OCT can be considered safe for CSCs.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.1-10
• /
• 2024

The radio propagation characteristics of the 6, 10, and 17 GHz frequency bands in multiple paths in an indoor lobby environment were analyzed. The line-of-sight (LOS) and non-LOS (NLOS) paths were measured from a distance of 2-16 m (0.5 m intervals) from the transmitting to the receiving antenna positions. For basic transmission losses, three parameters were compared using the floating intercept path loss model corresponding to the path. For a root mean square delay spread, the measurement results were compared for cumulative probabilities of 10, 50, and 90%. Propagation loss and propagation delay occurred in all measured frequencies owing to the existence of pillars and an unusual lobby structure. Thus, a measurement scenario for an indoor lobby environment and the provision of standard measurement data was proposed. The results may facilitate research on the radio propagation characteristics of 5G and millimeter-wave bands in indoor lobby environments with various structures.

• Asian Journal of Turfgrass Science
• /
• v.21 no.1
• /
• pp.23-37
• /
• 2007

This study was carried out to investigate the characteristics of root growth in Kentucky bluegrass sod(KBS) and creeping bentgrass sod(BGS) transplanted in summer(August 9) and fall(September 19), respectively. Hydroponic system was also used to observe rooting development in the study. Root development differed in KBS by transplanting time. It reached to more than 5 cm after 100 days In summer and 50 days in fall. However, BGS's root grew over 6cm after 40 days, regardless of the season. There was no significant differences in BGS, regardless of any cutting treatment. In the case of KBS, it was best with sod culled with 0.5cm deep and 1.5cm long. But it grew beyond 5 cm in root growth under any treatment after 40 days in transplanting. In a hydroponic study, BGS produced root over 100cm for 80 days through a summer season. However, the root of KBS did only grow in condition below $20^{\circ}C$. These results indicated that root growth characteristics were variable in BGS and KBS. It was considered that rooting development of BGS might be improved with sufficient irrigation in summer, and KBS grows well in lower temperature of $10{\sim}18^{\circ}C$, as compared with BGS. As to establishing the lawn with a sodding method, it should be careful in transplanting time, especially KBS.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.1
• /
• pp.10-16
• /
• 2004

This study was carried out to investigate the difference of growth characteristics and the content of root chemical components in four years old ginseng by paddy and upland cultivation at farmers' field in Korea. Proportions of silt, clay, liquid phase and porosity were higher in paddy soil than upland soil. The range of liquid phase was $17.5{\sim}19.5%$ in paddy and $7.0{\sim}12.8%$ in upland during growth period. EC and the other contents of OM, $NO_3^-,\;K_2O$, and Mg in paddy soil were higher than those of upland soil, while the contents of $P_2O_5$ and Ca were less than those of upland soil. The levels of chemical components of tested soil exceeded recommended range in EC, $NO_3^-$ and Ca of paddy soil, and in $P_2O_5$ and Ca of upland soil. Stem length, fresh root weight and total dry weight per plant in paddy were greater than those of upland. Root weight in paddy-ginseng showed a great increase on September, while it was not increased in upland because of early defoliation. Net assimilation rate and crop growth rate by paddy and upland cultivation showed distinct differences on May and September, and those of paddy-ginseng were higher than those of upland-ginseng. Yield and ratio of red-colored root showed no significant difference by paddy and upland cultivation, while significant differences were observed in diameter and length of primary root, contents of crude saponin and 50% ethanol extracts of primary root, and water content of root. Hardness of primary root showed no significant difference by paddy and upland cultivation until August, but it showed distinct difference on September, at which the hardness in upland cultivation was drastically decreased.

• Journal of Periodontal and Implant Science
• /
• v.29 no.1
• /
• pp.51-63
• /
• 1999

Exposure of the root surface due to gingival recession after periodontal surgery, elicit pain response when exposed to mechanical, heat, chemical or osmotic irritation. Especially patients treated with periodontal surgery, show high frequency. There have been reports that the 1 out of 7 patients complains of dentinal hypersensitivity. There have been many studies on the clinical effects of various materials on the treatment of dentinal hypersensitivity. The purposes of this study were to evaluate the effect of sodium chloride and potassium oxalate and to observe the relationship between the dentinal hypersensitivity and surface characteristics such as dentinal tubule size and number. This study included 20 teeth which were scheduled for extraction and had no pulpal disease. These teeth were divided into Root planing group, EDTA group, NaCl group and Oxalate group. Dentinal hypersensitivity is measured by tactile, pressured air and cold water using NRS (Numerical Rating Scales). Teeth were extracted under local anesthesia and each specimen was sectioned to a size about 3 X 5 mm and was examined under the scanning electron microscope (X2,000) The results were as follows, 1. The EDTA group exhibited significantly increased dentinal hypersensitivity comparing with the other groups. 2. The NaCl and Oxalate groups showed significantly reduced dentinal hypersensitivity comparing with the EDTA group. 3. As a method for dentinal hypersensitivity measurement, it was presumed thet tactile sensitivity test was not sensitive method but air blast test and cold water test were adequate method. 4. In a SEM study, the root planing group exhibited amorphous smear layer and showed no dentinal tubule orifice, but the EDTA group showed the large number of dentinal tubules. On the other hand, the NaCl and Oxalate groups did not show exposed dentinal tubules. The NaCl group showed more rough root surface than the EDTA group, and the Oxalate group showed many participates to be presumed as calcium oxalate particle. As the results from this study, root planing couldn't expose the dentinal tubule and NaCl and potassium oxalate occluded exposed dentinal tubule effectively. Dentinal hypersensitivity has close relationship with the exposure of dentinal tubules, especially with it's size and number.