• 제목/요약/키워드: room temperature catalyst

검색결과 132건 처리시간 0.021초

비예열 시동특성을 갖는 이원 촉매 베드 과산화수소 가스발생기 (Hydrogen Peroxide Gas Generator with Dual Catalytic Bed for Non-preheating Start-up)

  • 임하영;안성용;권세진
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2007년도 제28회 춘계학술대회논문집
    • /
    • pp.163-167
    • /
    • 2007
  • 은 촉매는 과산화수소 촉매분해에 많이 사용되지만, 상온에 시동이 어렵고 높은 온도에 적용하기 곤란하다. 본 논문에서는 은이 가지고 있는 단점을 극복하기 위해 기화기와 고온 촉매 베드로 구성된 이원 촉매 베드에 대한 연구를 수행하였다. 백금을 기화기 촉매로, perovskite 구조를 가지는 촉매를 고온 촉매로 선정하였고, 가스발생기를 이용한 시험을 통해 상온에서 예열이 없이도 시동이 가능함과 고온에서 안정적으로 작동함을 보여주었다.

  • PDF

포름알데히드 상온산화 촉매의 상용화를 위한 촉매 제조 및 공정 운전조건 최적화 연구 (A Study on the Optimization of Process Operation & Catalyst Preparing for Commercialization of Formaldehyde Room Temperature Oxidation Catalyst)

  • 이상현;박인출;김성수
    • 한국지반환경공학회 논문집
    • /
    • 제17권10호
    • /
    • pp.5-11
    • /
    • 2016
  • 본 연구에서는 포름알데히드를 상온산화시켜 제거하는 $Pt/TiO_2$ 촉매의 상용화 인자들이 조사되었다. 활성 귀금속 함량 최적화를 위해 촉매의 백금(Pt) 담지량을 변화시켜 제조 후 성능을 평가하였으며, 그 결과 1wt% 함량이 가장 이상적인 함량임을 확인하였다. 또한 활성금속인 Pt를 환원하여 제조한 환원 촉매가 상온에서 우수한 포름알데히드 산화 능력을 나타내었다. 이를 통해 활성금속의 산화가에 따라 성능이 변화될 수 있으며, 백금의 경우 metallic Pt($Pt^0$)로 존재할수록 포름알데히드 상온산화 성능이 증진될 수 있음을 확인하였다. 촉매의 운전인자를 도출하기 위한 공간속도 영향 평가 결과 공간속도가 낮을수록 촉매량 증가에 의해 포름알데히드 전환율이 증진되는 결과를 나타내었다. 또한 공기 내 반드시 존재하는 물질인 수분의 공기 내 공존 시 영향 평가를 실시하였으며, 그 결과 수분이 공존할 때 포름알데히드 산화반응이 수분이 존재하지 않은 조건에서의 활성보다 증진되었다. 상기 결과들을 통해 어떤 추가 에너지원 없이도 포름알데히드를 제거 할 수 있는 상온산화 촉매 상용화를 위한 핵심인자들을 확인하였다.

Efficient and Regioselective Ring-Opening of Epoxides with Alcohols and Sodium Azide by using Catalytic Amounts of GaCl3/Polyvinylpyrrolidone

  • Pourali, Ali Reza;Ghayeni, Samaneh;Afghahi, Fatemeh
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권6호
    • /
    • pp.1741-1744
    • /
    • 2013
  • A new polymeric catalyst was prepared by supporting $GaCl_3$ on cross-linked polyvinylpyrrolidone ($GaCl_3$/PVP). This catalyst was employed for efficient and regioselective ring-opening reaction of epoxides by various alcohols under solvent-free conditions at room temperature. In our procedure, this heterogeneous catalyst was used at neutral and mild reaction conditions to afford high yields of ${\beta}$-alkoxy alcohols. Also, regioselective conversion of epoxides to ${\beta}$-azidohydrines was accomplished by sodium azide in MeOH in the presence of $GaCl_3$/PVP at room temperature. $GaCl_3$/PVP is a non-hygroscopic and recoverable catalyst and is easily separated from reaction mixture by a simple filtration and re-used repeatedly. Also, this catalyst has good handling and can be stored for long time without any reducing of its reactivity.

친환경 촉매 Iron (III) phosphate: 실온/무용매 반응조건에서 알코올과 페놀의 선택적인 아실화 반응 (Iron (III) Phosphate as a Green and Reusable Catalyst Promoted Chemo Selective Acetylation of Alcohols and Phenols with Acetic Anhydride Under Solvent Free Conditions at Room Temperature)

  • Behbahani, F.K.;Farahani, M.;Oskooie, H.A.
    • 대한화학회지
    • /
    • 제55권4호
    • /
    • pp.633-637
    • /
    • 2011
  • 알코올과 페놀 계 화합물을 아실화시키는 반응에서, iron (III) phosphate 촉매를 사용했을 때에, 좋은 수율로 아실화 화합물을 얻었다. Iron (III) phosphate 촉매는 또한 친환경 반응에 재사용할 수 있는 친환경 촉매이다.

황화수소 상온 산화를 위한 바나듐계 촉매의 제조 조건 최적화 연구 (Optimization of Preparation Conditions of Vanadium-Based Catalyst for Room Temperature Oxidation of Hydrogen Sulfide)

  • 강혜린;이예환;김성철;장순웅;김성수
    • 공업화학
    • /
    • 제32권3호
    • /
    • pp.326-331
    • /
    • 2021
  • 본 연구에서는 황화수소를 상온에서 산화시키기 위한 TiO2 기반 바나듐계 촉매의 제조 조건을 최적화하였다. 촉매의 지지체로써 4종의 상용 TiO2를 선정하였으며, 함침법을 이용하여 제조된 다양한 바나듐 함량별 V/TiO2의 황화수소 상온 산화 성능 평가를 수행하였다. 선정된 TiO2 중 TiO2(A)를 기반으로 하며 바나듐(V) 함량이 5%인 촉매의 황화수소 전환율이 58%로 가장 우수한 것을 확인하였으며, 촉매의 물리·화학적 특성을 비교함으로써 지지체의 비표면적과 우점하는 바나듐의 종이 촉매 성능의 주요인자임을 도출하였다. 활성이 저하된 촉매의 재생 특성을 확인하기 위해 400 ℃에서 2 h 동안 열처리하였으며, 재생된 촉매에 황이 일부 침적되어 황화수소 산화량이 10% 감소하였으나 초기 성능은 유사하게 나타나는 것을 확인하였다.

상온 이온성액체를 이용한 호기성 벤질 알코올 산화반응용 Pd/TiO2 촉매 제조 (Preparation of Pd/TiO2 Catalyst Using Room Temperature Ionic Liquids for Aerobic Benzyl Alcohol Oxidation)

  • 조태준;유계상
    • 공업화학
    • /
    • 제26권3호
    • /
    • pp.351-355
    • /
    • 2015
  • 호기성 벤질 알코올 산화반응을 위하여 팔라듐이 담지된 이산화티타늄 촉매를 제조하였다. 반응점으로 사용되는 팔라듐 입자의 특성을 조절하기 위하여 8종류의 상온 이온성액체를 촉매 합성 시 사용하였다. 최적의 촉매특성을 규명하기 위하여 300, $400^{\circ}C$$500^{\circ}C$로 소성하여 반응을 수행하였다. 소성온도가 증가할수록 비표면적과 기공부피가 감소 하였지만, 기공크기는 커다란 변화가 없었다. 그러나 사용한 이온성액체의 종류에 따라 촉매의 물리적 특성은 다르게 나타났다. 동일한 반응조건에서 사용한 이온성액체와 소성온도에 따라 촉매의 반응활성에 차이를 보였다. 대부분의 경우 $400^{\circ}C$에서 소성한 촉매가 우수한 반응활성을 보였다. 하지만 1-Octyl-3-methylimidazolium hexafluorophosphate 와 1-Octyl-3-methylimidazolium trifluoromethanesulfonate를 이용하여 제조한 촉매의 경우 $300^{\circ}C$에서 소성한 경우 반응활성이 우수하였다. 본 실험에서 사용한 촉매들 중에서 1-Octyl-3-methylimidazolium tetrafluoroborate를 사용하고 $400^{\circ}C$에서 소성한 촉매가 가장 우수한 반응활성을 보였다.

Pt/TiO2 촉매의 물리화학적 특성이 CO 상온산화 반응에 미치는 영향 연구 (Effect of Physico-chemical Properties of Pt/TiO2 Catalyst on CO Oxidation at Room Temperature)

  • 김성철;김거종;홍성창
    • 공업화학
    • /
    • 제29권6호
    • /
    • pp.657-662
    • /
    • 2018
  • 본 연구에서는, $Pt/TiO_2$ 촉매의 물리화학적 특성이 CO 상온산화 반응에 미치는 영향을 조사하기 위하여 각기 다른 물리적 특성을 가지는 다양한 $TiO_2$ 지지체를 이용하여 $Pt/TiO_2$ 촉매를 제조한 후 평가하였다. 촉매의 물리화학적 특성을 조사하기 위하여 XPS, CO-chemisorption, BET, CO-TPD 분석을 수행하였다. 그 결과, active particle diameter가 작을수록, metal dispersion, surface area가 클수록 우수한 CO 상온산화 반응을 나타내었다. 이러한 물리적 특성은 active site의 수를 증진시켜 대상물질은 CO의 흡착량의 증가를 야기시켰다. 또한, $O_2$-consumption이 클수록 우수한 산소 전달 능력을 통해 보다 높은 CO 상온산화 반응활성을 나타내었다.

상업용 오존촉매와 광촉매를 이용한 오존제거특성 (Characteristics of Residual Ozone Decomposition with Commercial Ozone Decomposition Catalyst (ODC) and Photo catalyst)

  • 변정훈;박재홍;황정호
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 춘계학술대회
    • /
    • pp.1255-1260
    • /
    • 2004
  • Decomposition of ozone at room temperature was investigated comparatively with commercial monolithic ozone decomposition catalyst (ODC, $MnO_2$) and monolithic photo catalyst ($TiO_2$). The effects of residence time, UV (ultraviolet) light dependence and ozone concentration on the conversion was presented. UV ray was irradiated using BLB (black light blue) lamp ($315{\sim}400$ nm), supplied with a constant intensity in the reactor. The concentration of ozone in the square-shape reactor can be controlled by combining the DBD (dielectric barrier discharge) reactor with an AC high voltage supply system. The catalytic performance, in presence of UV irradiation did not show significant changes for $MnO_2$ catalyst. $TiO_2$ catalyst was the different case, which showed higher decomposition activity in presence of UV irradiation. Deactivation of catalyst detected by real-time ozone monitor for 120 hours with a constant inlet ozone concentration.

  • PDF

Asymmetric Michael Addition of Ketones to Nitroolefins Catalyzed by a New Chiral Catalyst

  • Wang, Lian-Jun;Hu, Feng-Feng
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권5호
    • /
    • pp.1280-1282
    • /
    • 2010
  • A new chiral catalyst was synthesized and found that it could catalyzed the asymmetric Michael reaction of ketones with nitroolefins smoothly at room temperature, giving the desired adducts in 71 - 92% yields with excellent diastereoselectivities and high enantioselectivities (up to 95% ee).

TMEDA: Efficient and Mild Catalyst for the Acylation of Alcohols, Phenols and Thiols under Solvent-free Condition

  • Kadam, Santosh T.;Lee, Han-Bin;Kim, Sung-Soo
    • Bulletin of the Korean Chemical Society
    • /
    • 제30권5호
    • /
    • pp.1071-1076
    • /
    • 2009
  • N,N,N′,N′-tetramethylethylenediamine (TMEDA) acts as a simple, mild and efficient catalyst for the acylation of alcohols, phenols and thiols at room temperature under solvent-free condition. Acylation reaction with acetic anhydride and benzoic anhydride proceeds with good to excellent yield in the presence of TMEDA as the catalyst.