• Journal of Mushroom
• /
• v.18 no.4
• /
• pp.317-322
• /
• 2020

This experiment was conducted to solve the failure of fruiting body production in the bottle cultivation of the oyster mushroom cultivar 'Heuktari'. The effects of incubation temperature on primordium formation and fruiting body yield of the oyster mushroom cultivar 'Heuktari' were investigated. The proper temperature for mycelium growth of 'Heuktari' on potato dextrose agar (PDA) medium is 23-26℃. The mycelial growth of 'Heuktari' was faster than that of Chunchu 2ho. During mycelial culture in sawdust medium, the temperature of the medium in the bottle initially increased, reached the highest point in the middle of the culture, and then decreased. The higher the set temperature, the shorter the incubation period. When the incubation temperatures were 20℃ and 24℃, respectively, the undeveloped primordium formation rates were low (1.8% and 4.2%, respectively). However, the rate of undeveloped primordium formation increased, and the yield decreased at incubation temperatures of 16℃ and 28℃. Mushroom farms that set incubation temperatures to 18℃ and maintained the medium temperature at less than 28℃ showed undeveloped primordium formation rates ranging between 0.3-0.8%. The rate of undeveloped primordium formation increased and the yield decreased in the farms with high incubation temperatures (above 28℃). We found that in order to reduce undeveloped primordium formation, the air inside the incubation room should be circulated continuously so that the temperature of the medium does not rise above 28℃, and dense incubation conditions should be avoided.

• Food Science and Industry
• /
• v.55 no.2
• /
• pp.188-202
• /
• 2022

In the insect industry, as the scope of application of insects is expanded from pet insects and natural enemies to feed, edible and medicinal insects, the demand for quality control of insect raw materials is increasing, and interest in securing the safety of insect products is increasing. In the process of expanding the industrial scale, controlling the temperature and humidity and air quality in the insect breeding room and preventing the spread of pathogens and other pollutants are important success factors. It requires a controlled environment under the operating system. European commercial insect breeding facilities have attracted considerable investor interest, and insect companies are building large-scale production facilities, which became possible after the EU approved the use of insect protein as feedstock for fish farming in July 2017. Other fields, such as food and medicine, have also accelerated the application of cutting-edge technology. In the future, the global insect industry will purchase eggs or small larvae from suppliers and a system that focuses on the larval fattening, i.e., production raw material, until the insects mature, and a system that handles the entire production process from egg laying, harvesting, and initial pre-treatment of larvae., increasingly subdivided into large-scale production systems that cover all stages of insect larvae production and further processing steps such as milling, fat removal and protein or fat fractionation. In Korea, research and development of insect smart factory farms using artificial intelligence and ICT is accelerating, so insects can be used as carbon-free materials in secondary industries such as natural plastics or natural molding materials as well as existing feed and food. A Korean-style customized breeding system for shortening the breeding period or enhancing functionality is expected to be developed soon.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.175-198
• /
• 2022

With the development of technology, the methods of digitally converting various forms of analog information have become common. As a result, the concept of recording, building, and reproducing data in a virtual space, such as digital heritage and digital reconstruction, has been actively used in the preservation and research of various cultural heritages. However, there are few existing research results that suggest optimal scanners for small and medium-sized relics. In addition, scanner prices are not cheap for researchers to use, so there are not many related studies. The 3D scanner specifications have a great influence on the quality of the 3D model. In particular, since the state of light reflected on the surface of the object varies depending on the type of light source used in the scanner, using a scanner suitable for the characteristics of the object is the way to increase the efficiency of the work. Therefore, this paper conducted a study on nine small and medium-sized buried cultural properties of various materials, including earthenware and porcelain, by period, to examine the differences in quality of the four types of 3D scanners. As a result of the study, optical scanners and small and medium-sized object scanners were the most suitable digital records of the small and medium-sized relics. Optical scanners are excellent in both mesh and texture but have the disadvantage of being very expensive and not portable. The handheld method had the advantage of excellent portability and speed. When considering the results compared to the price, the small and medium-sized object scanner was the best. It was the photo room measurement that was able to obtain the 3D model at the lowest cost. 3D scanning technology can be largely used to produce digital drawings of relics, restore and duplicate cultural properties, and build databases. This study is meaningful in that it contributed to the use of scanners most suitable for buried cultural properties by material and period for the active use of 3D scanning technology in cultural heritage.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.7
• /
• pp.529-538
• /
• 2020

This study aims to develop of contents for the activities of daily living training - Korean version that reflexes the domestic situation and can be applied to clinical practice. For contents development, a Delphi survey was conducted with 13 experts. In the first Delphi survey, 133 items of activities of daily living training are derived based on previous studies, and then the extracted items are asked to group of experts, and the derived items are answered for actual domestic clinical application. In the second survey, 118 items were added by excluding items with a low content validity ratio (CVR) including the results of the first survey, and adding items that can be derived from other opinions. In the 3rd survey, while presenting the 2nd Delphi survey items as they are, it provides an opportunity to change their opinions by presenting their 2nd response and the 2nd average score of other expert panels, and adding appropriateness and importance together. The data were analyzed to obtain the mean, standard deviation, interquartile range, CVR, convergence, and consensus. Finally, a total of 69 items were selected and 49 items were excluded so that 105 items for CVR 0.54 or higher, 111 items for convergence degree 0.50 or lower, and 70 items for continuity degree 0.75 or higher. Sexual activity, care of others, care of pets, and child rearing are difficult to apply socially and culturally, driving and community mobility cannot be performed within the clinical room, and home establishment and management may have different roles depending on gender, and religious spiritual activities and expression are so personal. For these reasons, these items were found to have low importance or suitability. This study can be usefully used as an indicator on the activities of daily living training - Korean version in clinic or community setting.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.3
• /
• pp.189-196
• /
• 2022

Plasma refers to an ionized gas that is often referred to as "the fourth phase of matter", following solid, liquid, and gas. Plasma has traditionally been utilized for industrial applications such as welding and neon signs, but its promise in biomedical fields such as cancer treatment and dermatology has lately been recognized. Indeed, due to its beneficial effects in promoting collagen production, improving skin tone, and eliminating harmful bacteria in the skin, plasma treatment constitutes an important target for dermatological research. In this study, a plasma device for cosmetic manufacturing based on nitrogen, the main component of the atmosphere, was designed and assembled. Moreover, nitric oxide (NO) was selected since is easier to follow and evaluate than other nitrogen plasma active species, and its contents were measured to perform a quantitative and qualitative evaluation of plasma. First, an injection method, using different proximities labeled "sinking" and "non sinking" treatments, was performed to test the most efficient plasma treatment method. As a result, it was observed that the formulation obtained by a non sinking treatment was more effective. Furthermore, toner and ampoule were selected as cosmetics formulations, and the characteristics of the formulation and changes in the injected plasma state were observed. In both formulations, the successful injection of NO plasma was 2 times higher in toner formulation than ampoule formulation, and it gradually decreased with time, having dissipated after a week. It was confirmed that the nitrogen plasma used did not affect the stability of the toner and ampoule formulations at low temperature (4 ℃), room temperature (25 ℃), and high temperature (37 ℃ and 50 ℃) conditions. The results of this study demonstrate the potential of plasma cosmetics and highlight the importance of securing the stability of the injected plasma.

• Journal of Naturopathy
• /
• v.11 no.1
• /
• pp.18-30
• /
• 2022

Background: It was to develop an air purification system (APS) using an underground air purification layer to verify the effect of basalt forest's underground air (sumgol) on a volcanic Jeju. Finally, it is necessary to analyze these purified air components and their usefulness to the human body in an air experience center. Purpose: It was to collect basalt forest air, analyze its composition, and explore its effect on the human body. Methods: We APS devices installed at four points in the Papaville area of Jeju. The air discharged from the APS was collected and analyzed the recycling components. An installed experience room filled with negative ions is about 5,000 ions/m³. After allowing the participants to stay for 60 to 120 minutes, we investigated the state of blood vessels. Results: In the analysis of the underground air, the O₂ concentration was 21.18%, which was higher than the average oxygen concentration of 20.94% in the atmosphere. However, Formaldehyde was not detected, and the CO₂ was 419 ppm, which was lower than that of indoor air. The PM2.5 concentration was less than 24 ㎍/m³ and detected anions over 5.000 /m³. The experiencer's vascular states improved, and the increase in pulse rate and stress relief were high. Conclusions: The valuable ingredients identified by analyzing the air were precious for natural healing. The experience results showed that it effectively improved the pulse rate, blood vessels, and stress. These conditions may be highly beneficial as a new area for expanding the basalt lava forest in the Jeju area into the natural healing and wellness industry.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.6
• /
• pp.35-54
• /
• 2021

This study examines the characteristics of CBS's Kim Hyun-Jung's News Show(hearafter News Show) and the change to transmedia. The distinguishing characteristics of News Show compared to radio-based current affairs programs are as follows. First, despite its time limit, it adopts the form of investigative reports or investigative documentaries to uncover the truth of the events through 'Detective Son Su-Ho', etc. Second, News show's interviews have avoided biased stance in the reporting of minority issues by interviewing the affected parties anonymously including people involved in incidents and accidents, bereaved families, and other victims. News Show has been producing a transmedia content called 'That Honey Show' (a show that reads comments as fun as honey) since November 2018. 'That Honey Show' is broadcast in real time on YouTube right after the News Show radio broadcast ends. As a form of spin-off content, 'That Honey Show' breaks down the boundaries among staff, MCs, and guests, as well as shifting roles by using 'vice characters'. The female host, Kim conducts interviews with the main characters related to various issues and extends the fixed identity of current affairs shows to the everyday politics and cultural realms. Thus she draws active participation and responses audience. This paper analyzes two representative broadcast cases of 'That Honey Show'-first, the case of resistance and activity of the BTS fandom ARMY in the US presidential election, and, second, the case of reporting on the Nth room incident. This analysis considers the critical participation of digital citizens and the effect of fostering a sense of community in the current affairs show in the transmedia era.

• The Korea Journal of Herbology
• /
• v.27 no.6
• /
• pp.115-122
• /
• 2012

Objectives : This study evaluated activities and ingredient contents concerning extracts according to extraction solvents of Insampaedok-san (IS, Renshen bai du-san). Methods : The herbal constituents of IS were extracted with water and 70% ethanol at $100^{\circ}C$ for 2 hr. Using the HPLC system, the six ingredient contents of different solvent extracts of IS were analyzed. The nitric oxide (NO), prostaglandin $E_2$ ($PGE_2$) production and proinflammatory cytokines were measured in RAW264.7 cells stimulated with lipopolysaccharide (LPS). The macrophage-derived chemokine (MDC/CCL22) and regulated on activation normal T-cell expression and secreted (RANTES/CCL5) production were measured in HaCaT and BEAS-2B cells stimulated tumor necrosis factor-${\alpha}$ (TNF-${\alpha}$) and interferon-${\gamma}$ (IFN-${\gamma}$). The activities of glycerol-3-phosphate dehydrogenase (GPDH) and leptin level were measured in 3T3-L1 cells. Results : The calibration curves showed good linearity ($r^2$=1.0000) for different concentration ranges. The contents of liquiritin, naringin, hesperidin, neohesperirin and glycyrrizin in 70% ethanol extracts of IS were relatively higher than that of water extract, however the content of ferulic acid in 70% ethanol and water extract of IS were similar. The extraction solvents of water and 70% ethanol were evaluated inhibitory effect on the production of NO, $PGE_2$, TNF-${\alpha}$ and IL-6 in RAW 264.7 cells. Their extractions were inhibitory effect on production of MDC/CCL22 and RANTES/CCL5 in HaCaT cell and BEAS-2B cell, respectively. In addition, evaluated reduced on GPDH activity and leptin level in 3T3-L1 preadipocyte cell. Conclusions : Our results suggest that IS extracts were inhibitory effects of disease such as inflammation, allergies and obesity.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.24-48
• /
• 2022

Bronze mirrors found in pagodas were regarded as simple offerings and thus have received little attention in studies. Furthermore, the few studies on bronze mirrors enshrined in pagodas have focused on the line-engraved mirrors found in the pagodas of the Kingdom of Wuyue; therefore, it is difficult to understand the general characteristics of the bronze mirrors enshrined in the pagodas. This study assumes that the bronze mirrors found in many pagodas in the Kingdom of Wuyue and the Song dynasty were enshrined for a specific purpose. To explore this assumption and accurately understand the artifacts, this study focuses on the location and method of enshrinement. The number of bronze mirrors enshrined in pagodas increased during the Kingdom of Wuyue, with the mirrors expressing statues and inscriptions related to Buddhism rather than being simple offerings. This shows that the purpose of the bronze mirror changed. The influence of the Kingdom of Wuyue continued during the Song dynasty; however, the pattern of bronze mirror enshrinement changed due to the culture and social atmosphere of the time. The most common types of enshrined bronze mirrors were plain, and bronze mirrors from the Dang dynasty were also used consistently. Plain bronze mirrors were used more frequently in this period despite the lingering influence of the Kingdom of Wuyue because it was less laborious to engrave images and inscriptions such as the inscription of Buddha. Additionally, bronze mirrors were valued during this period because of the attention toward the imitation of the archaic bronze(仿古銅器) of the Song dynasty and the influence of the emperor. Moreover, it is believed that bronze mirrors were enshrined in pagodas as offerings as they were deemed valuable at the time. There was a change in the method of enshrining bronze mirrors in pagodas during the Kingdom of Wuyue and the Song dynasty. During this time, bronze mirrors that were positioned on the floor or in iron boxes were intentionally attached to walls or hung from the ceiling. This method was largely divided into two types: attaching to walls or the ceiling(嵌入鏡) and hanging from the ceiling(懸鏡). A typical example of hanging a bronze mirror from the ceiling can be seen in the Jingzhisa Temple Pagoda, and Teng County's Fushengsa Temple Pagoda contains an example of attaching a bronze mirror to the ceiling. The methods of hanging or attaching bronze mirrors to the ceiling were closely related to the methods employed in Chinese tombs. Song dynasty burial chambers had a high and wide structure, so to defend against evil spirits(辟邪用), bronze mirrors were used to protect the burial rooms. Bronze mirrors were, therefore, placed high to illuminate the burial room. This was achieved in the ways mentioned above. As underground chambers became wider and higher, mirrors also protected the important areas of the chambers and illuminated the interiors. Thus, it is believed that the methods of enshrining bronze mirrors in the pagodas during the Kingdom of Wuyue and the Song dynasty arose from the method of enshrining bronze mirrors in tombs at the time. Thereafter, pagodas, such as the Miaojuesa Temple Pagoda, in which the placement of a bronze mirror was actively considered from the design stage were constructed.

• Journal of Industrial Convergence
• /
• v.20 no.9
• /
• pp.59-70
• /
• 2022

Background: Diabetes education is an important factor in blood glucose control. Reinforced education is necessary for effective diabetes education. However, it is difficult to provide reinforced diabetes education within Korea's medical environment. Therefore, we want to analyze the effect of continuous diabetes education using mobile health care that can effectively provide repeated education without having to face the patient. Methods: This study is a multicenter, randomized, controlled, pre-post design study conducted to analyze the effect of a continuous diabetes education method. A total of 109 people were registered at five hospitals in south Korea, and they were randomly assigned to the app group (34 people) who received real-time coaching and repetitive training, the logbook group (37 people) who received face-to-face training after writing a blood glucose logbook, and the general group (38 people) who received a one-time diabetes education. The study was conducted for a total of 24 weeks. Twenty-one patients withdrew their consent and failed to perform an HbA1c. A final 88 patients were analyzed. The difference in HbA1c, Self-management behavior, and Quality of life before and after education was analyzed. Results: The study involved 51 (58%) male subjects, mean age was 55.8 years and mean duration of diabetes was 7.6 years. After 24 weeks of intervention, there was no significant difference in self-care behavior and quality of life between the three groups, but the HbA1c of the app group significantly decreased after education compared to the logbook group and the general group (F=4.62, p=.013). Conclusion: It can be seen through the app group that receiving real-time education is more effective in improving blood glucose management and continuous diabetes education is important.