• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.388-395
• /
• 2019

The purpose of this study is to suggest structural model and analyze design factors for the development of small greenhouse standardization model. The average dimensions of small greenhouse desired by urban farmers were 3.3m in width, 1.9m in eaves height, 2.7m in ridge height, 5.7m in length. The cladding materials for small greenhouse were preferred to glass, PC board and plastic film, framework to aluminum alloy and steel, and heating method in electrical energy. In addition, it was analyzed that small greenhouses need to develop structural model by dividing them into entry-level type and high-level type. The roof type that was used for entry-level type was arch shape, framework was steel pipe, cladding material was plastic film. On the other hand, high-level type was used in even span or dutch light type, framework with square hollow steel, cladding materials with glass or PC board. In consideration of these findings and practicality, this study developed four types of small greenhouses. The width, eaves height, ridges height, and length of the small greenhouses of even span type, which were covered with 5mm thick glass and 6mm thick PC board were 3m, 2.2m, 2.9m, and 6m, respectively. The small greenhouse of dutch light type covered with 5mm thick glass was designed with 3.8m in with, 2.2m in eaves height, 2.9m in ridges height, and 6m in length. The width, eaves height, ridges height, and length of the arch shape small greenhouse covered with a 0.15mm PO film were 3m, 1.5m, 2.8m, and 6m, respectively.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.192-214
• /
• 2023

Wooden architectural cultural heritages are one of the visible legacies that show the national's identity. Even when the concept of 'the original' of cultural heritages was not accurately understood, the emphasis of preservation and management of cultural heritages was placed on 'preservation of the original form' or 'maintenance of the original form'. Moreover, these days, following the trend of international preservation principles, cultural heritages are considered important as "values as historical objects." This paper is the result of an attempt to determine the scope and content of what parts should be monitored to maintain the original form of wooden architectural cultural heritage. The first thing to be done in monitoring wooden architectural cultural heritage is to check the condition of the ground and foundation. The second is the column. This is because the instability of the column causes damage to the joint with each member and the fitting part, resulting in physical changes leading to damage to the wall. The third is monitor the roof tiles. If the leak continues into the building due to the separation or damage of the roof, the defect should be partially dismantled and repaired, so it should be monitored to maintain its original shape as much as possible. The monitoring range of the base, column, and roof serves as a reference point for identifying what damage is being done to the relevant cultural heritages. In other words, the data at the time when monitoring began becomes the 'original' for the year. Alternatives based on the analysis of monitoring for the preservation of original cultural heritages should be actively introduced. In addition, by sharing the current state and situation of cultural heritages as a result of monitoring with various related organizations, preventive preservation should be established rather than preservation of cultural heritages by "intervention."

• Journal of Korea Multimedia Society
• /
• v.16 no.2
• /
• pp.206-212
• /
• 2013

Information and Communications Technologies(ICT) represented by Multimedia, Virtual Reality and Network could be used as the better ways to preserve and restore the original shape of cultural contents. This paper presents the detailed methods of Multimedia and Virtual Reality technologies to digitally implement the traditional wooden buildings which are called as a typical 'Korean Cultural Content." We implemented a 3D modeling of architectural parts, realized a roof curve, and texture-mapped the material qualities of traditional wooden buildings by using Graphic techniques. In addition, the information, which is implemented by marker-based Augment Reality, for the traditional wooden buildings can be obtained through the mobile appliances such as a smart phone. We, also, presented how to practically use the implemented digital Korea traditional wooden buildings.

• Journal of architectural history
• /
• v.10 no.3 s.27
• /
• pp.45-60
• /
• 2001

The Tongdo temple have been transformed continuously since its first establishment about 1300 years ago. Nevertheless three critical elements specified by 'Jajangyulsa', founder of the temple have not varied over the times but rather strengthened and strongly combined. All elements and doctrines of the religion coexist and form a harmony within the whole of the temple. This researcher examined what changes, or combinations, in spatial formation were sought for such unique structures of the Tongue temple by focusing mainly on the Sangrojun area of the temple to obtain the following findings. First. unlike a work by a Japanese researcher 'Sekino Tadashi', the east yard of the main building was found located on the section line which corresponded to the separation line of Yungkuncheokdo(營建尺度=measure running) from the edge of the Keumkangkyedan(金剛戒壇 =Buddhist platform) embankment to the corner column of the Kamrodang. This was confirmed as a result of the review of photos shown in [Chosun Kojukdobo]. Second, the number of stairs used for the Keumkangkyedan was thought to become three when the temple was firstly restored in 1379 as a result that this researcher reviewed Chinese literature 'DoSun' and [Kyedandokyung(戒壇圖經)], records by 'Lee saek' and 'Jung Shihan', studies of Yungkun measure and actual changes in the temple. Then the temple was forth restored in 1705 when the second of the stairs was changed in area and height and at the same time grounded hard for a space for a Buddhist service. Third, the roof of the main building was probably changed in shape during the Koryo period when the plane structure, furnish arrangement, emphasized front, stone lanterns of the building and political factors of that time were all considered. Fourth, the main building was Initially designed to provide a Buddhist sermon service which was assumedly followed by a similar service at a Keumkangkyedan. Thus the main building had a small window on the northern side which might be opened up to look out or otherwise go outside like a door. However, the window was probably locked up like a surrounding wall since the main building was entirely repaired after the end of Japanese invasion of Korea in 1592.

• Journal of the Korean housing association
• /
• v.25 no.6
• /
• pp.57-66
• /
• 2014

With regard to the pavilion buildings of Imcheonggak Gunjajeong and Donglakdang Gyejeong that are located within residential areas, this study focused on the construction background, the building owner's circumstances and the location environment of these buildings, and attempted to derive the architectural characteristics presented by these two pavilion buildings and, through this, to grasp the architect's intention of plan. The results of this study are as follows. With regard to Gunjajeong, it could be confirmed that, first, it is located in a propitious site and took the composition that follows the family ritual standards for the family rituals of the scholar-gentry class and opens to visitor access, and second, the floor height of the site and interior space was designed so that Munpilbong on the south and the Sarangchae on the west, and the Sadang on the east can be connected visually, and third, the authority and dignity of the head family were built through the symmetric 丁-shaped plane figure, the wide partition module, the form-centered building, and the hierarchical composition of the roof. On the other hand, with regard to Gyejeong, it could be confirmed that, first, it is located along the stream of Jagye valley that has no mountains in the front and in the back and took the composition that put the name symbolizing Taoist thoughts on the surrounding natural environment and was closed to visitor access but opens to nature, and second, with Jagye and Jagye surroundings as the main landscape, it built the concept of intended landscape that symbolizes the Taoist thoughts by giving names not only simply to the visible objects but also to surrounding rocks, and third, the asymmetric ㄱ-shaped plane composed a yard-centered space rather than emphasizing the shape, and connected the part of the plane with Jagye so as to be embodied as a personal inner self-perfecting place that closely communicates only with nature away from the mundane world.

• Archives of design research
• /
• v.16 no.4
• /
• pp.345-354
• /
• 2003

The Greek theater was the first one which was built artificially and the Roman theater was erected as creative form following the Greek theater The style of these ancient theaters has influenced modern theater. In terms of the purpose and function of the theater, the Greek was derived from religious purpose but the Roman was derived for amusement. We can observe several differences in comparing the Greek with the Roman theater. In the shape of the theater, the Greek theater was dignified and grand and had an open-air structure, but the Roman theater was splendid and ornamental and had a roof over the stage. In the character of the theater, the Greek theater was democratic but the Roman theater was partial. The Greek and Roman theaters have became one source of the modern theater as the Greek and Roman plays have became the source of the modern play, although there are several differences according to the social and dramatic characters.

• Journal of Conservation Science
• /
• v.17 s.17
• /
• pp.5-18
• /
• 2005

Rock materials of the Stone Lantern in the Gwanchoksa temple was composed of dark grey granodiorite. This Stone Lantern is partly structural distortion as S-shape, especially, rocks of the upper supports and under the roof materials were highly deterioration due to the surface exfoliation, and strong secondary contaminations owing to the discoloration by oxidation of inserted iron plates between the rock properties, and white grey to dark black contaminants along the rain path way. Rock surface of the Stone Lantern occurred as partly green patches because of coated by algae, lichen and moss. This biological problems are need for cleaning and treatments. The Stone Lantern have to be considered to conservation method that can reduce weathering factors with long-term monitoring about environmental change for structural stability, surface degradation and mechanical weathering. Materials of the Stone Lantern and basement rocks of the area are consisted of same petrogenetic granodiotite based on occurrences, petrological and geochemical characteristics.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.6
• /
• pp.557-567
• /
• 2015

With the increasing demands of 3D spatial information in urban environment, the importance of point clouds generation techniques have been increased. In particular, for as-built BIM, the point clouds with the high accuracy and density is required to describe the detail information of building components. Since the terrestrial LiDAR has high performance in terms of accuracy and point density, it has been widely used for as-built 3D modelling. However, the high cost of devices is obstacle for general uses, and the image-based 3D reconstruction technique is being a new attraction as an alternative solution. This paper compares the image-based 3D reconstruction technique and the terrestrial LiDAR in point of establishing the as-built BIM of outdoor structures. The point clouds generated from the image-based 3D reconstruction technique could roughly present the 3D shape of a building, but could not precisely express detail information, such as windows, doors and a roof of building. There were 13.2~28.9 cm of RMSE between the terrestrial LiDAR scanning data and the point clouds, which generated from smartphone and DSLR camera images. In conclusion, the results demonstrate that the image-based 3D reconstruction can be used in drawing building footprint and wireframe, and the terrestrial LiDAR is suitable for detail 3D outdoor modeling.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.3
• /
• pp.126-132
• /
• 2011

Recently, high-rise apartment is being briskly built but there are problems such as lack of ventilation, stack effect and much energy consumption. Therefore It is recommended to develop a Small Wind Power System Combined Ventilator as a solution to solve these problems. The purpose of this study is to provide basis for Small Wind Power System Combined Ventilator in super high-rise apartment. This study conducted CFD simulation (Star-CCM) according to the shape of structures, building height and distance of two structures to identify the effect of wind speed increase when the structure is installed. As a result, pyramidal type was best suited for increase of wind speed. The best place was the front of the roof to main wind direction, and the best building height was 200m rather than 300m. If two or more small wind turbines combined ventilator are installed closely, vertical position to main wind direction is recommended. Horizontal position must necessarily be avoided, but height difference between two blades more than 3m showed good performance.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.3
• /
• pp.136-150
• /
• 2008

Many studies have been carried out for automatic extraction of building by LiDAR data or airphoto. Combining the benefits of 3D location information data and shape information data of image can improve the accuracy. So, in this research building recognition algorithm based on contour was used to improve accuracy of building recognition by LiDAR data and elaborate building boundary recognition by airphoto. Building recognition algorithm based on contour can generate building boundary and roof structure information. Also it shows better accuracy of building detection than the existing recognition methods based on TIN or NDSM. Out of creating buffers in regular size on the building boundary which is presumed by contour, this research limits the boundary area of airphoto and elaborate building boundary to fit into edge of airphoto by double active contour. From the result of this research, 3D building boundary will be able to be detected by optimal matching on the constant range of extracted boundary in the future.