• Composites Research
• /
• 제32권1호
• /
• pp.29-36
• /
• 2019

본 논문의 목적은 소재대체법과 치수최적화 기법을 이용한 2층 고속열차 알루미늄 압출재 차체의 경량 설계를 제시하는 것이다. 소재대체법을 수행하기 위해 위상최적화 기법을 이용하여 차체 구조물의 샌드위치 복합재 적용 부위를 결정하였다. 해석결과, 루프와 2층 언더프레임에 샌드위치 복합재가 적용 가능함을 보여주었다. 치수최적화는 알루미늄 압출재와 카본/에폭시 복합재의 두께를 결정하는데 사용되었다. 치수최적화를 수행하기 위해, 설계변수, 제약조건, 목적함수를 정식화 하였으며 이러한 조건에 의해 유효설계를 도출하였다. 경량 설계의 결과로 2층 고속열차 하이브리드 차체의 무게를 2.18 ton(17.70%)까지 줄일 수 있음을 보여주었다.

• 대한건축학회논문집:계획계
• /
• 제36권4호
• /
• pp.71-81
• /
• 2020

The purpose of this study is to propose the planning methods for pollution prevention in the initial design stage by identifying the pollution phenomena on the exterior of the building. It is important to catch the problem early on because exterior troubles begin with an initial design defect and causes rapid aging. The scope of this study is seoul public borough offices that should be sustainable for long as landmark located at the center of the district. Field survey was conducted three times in six months. Twenty-six borough offices were diagnosed with three levels of contamination through visual inspection and the contaminated locations, types, materials, and characteristics were checked. Fourteen common contaminated locations were identified in the first and intensively rechecked in the second. Five locations vulnerable to contamination were designated and the contamination and cleanliness situations were checked by location in the third. As a result, main polluted types and locations are sloping wall, upper wall, protruded wall, canopy, and wall under window. The key to avoiding these pollution problems is to minimize the horizontal plane on which dust can be deposited. In other words, it can be considered variously by shape and location, such as the slope of the horizontal plane, the floating of the surface, the installation of the roof surface, and the vertical louvers. And throating plans and material plans suitable for each location are presented. Various methods of the shape and location, material are expected to use as useful basic data for preventing pollutions during the initial design stage.

• 문화기술의 융합
• /
• 제7권1호
• /
• pp.49-57
• /
• 2021

본 연구는 자연환경 속에서 스스로 성장하는 나무의 시스템을 통하여, 건축물에 있어서도 스스로 에너지를 생산할 수 있는 방법을 모색하고자 한 것으로, 나무의 구조, 순환 및 환경반응 시스템으로 구분하여 실 사례와 문헌중심으로 살펴본 것이다. 1) 나무의 구조는 지상계와 뿌리조직으로 나뉘며, 가압된 세포막들로 강성을 유지한다. 지상계인 줄기와 크라운에 의한 풍력의 저항은 건축물의 내진구조원리에, 측면 뿌리의 판형 버트레스는 수평트러스 및 현수교에 적용될 수 있다. 또한 다세포의 블록들은 공기막 구조의 원리에 해당된다. 2) 나무의 순환시스템에 있어서, 나뭇잎의 미세한 기공을 통한 증산작용은 많은 양의 열 방출로 효과적인 냉각 수단이 될 수 있어, 건축물의 냉방에 직접 도입할 수 있다. 또한 증산 작용은 물의 양수와 급수, 태양 그늘을 이용한 창문의 자동 개폐 등에도 적용될 수 있다. 3) 나무의 잎과 꽃에서 읽어낼 수 있는 환경변화에 따른 반응 시스템은 새로운 감지기술과 재료의 사용을 통하여 건축물의 지붕 및 외피디자인에 적용될 수 있다.

• Imaging Science in Dentistry
• /
• 제51권4호
• /
• pp.421-427
• /
• 2021

Purpose: The pulp length to width (PL/W) ratio of the maxillary lateral incisor can be used as an age determination method. This study aimed to investigate the correlation between the PL/W ratio of the maxillary lateral incisor on panoramic radiographs and human chronological age in Indonesian subjects. Materials and Methods: This study analyzed with 134 maxillary lateral incisors on 113 panoramic radiographs from patients who visited the Oral and Maxillofacial Radiology Unit of Dental Hospital Universitas Padjadjaran, Bandung, Jawa Barat, Indonesia, from 2013 to 2018 (age range: between 11 to 60 years). The pulp length was measured from the pulp chamber roof to the apical foramen, and the pulp width was measured on the cervical area of the cementoenamel junction in millimeters using Fiji ImageJ open-source software. Simple linear regression (in SPSS) was used to analyze the results. The reliability of the observers was evaluated. Results: The PL/W ratio of the maxillary lateral incisor was significantly correlated with chronological age (P<0.01). No statistically significant difference was found in the PL/W ratio between the left and right maxillary lateral incisors(P=0.333). There was a very strong correlation (r=0.939) between the PL/W ratio of the maxillary lateral incisor and human chronological age, with the following formula: age= -3.057+1.875×PL/W ratio (R²=0.882, standard error of estimate: 4.659). Conclusion: The PL/W ratio of the maxillary lateral incisor on panoramic radiograph can be used for age determination in Indonesian subjects.

• 한국건축시공학회지
• /
• 제23권1호
• /
• pp.1-9
• /
• 2023

본 연구에서는 보편적으로 건물의 옥상 등에 사용되는 폴리 우레탄 방수재의 바탕구조물의 함수정도와 시공환경조건에 따른 하자원인을 분석하기 위한 것으로 바탕판의 함수조건에 따른 부착강도, 표면상태를 육안관찰하였고, 온도, 습도의 양생조건에 따라서 방수재 도막의 기계적 성능을 평가하였다. 실험결과 바탕판의 함수상태가 10%이상일 때 도막의 부착이 이뤄지지 않음을 확인하였고, 온습도 조건이 20℃, 80% RH일때는 기초물성이 모두 확보되었으나, 40℃, 60% RH일 때 표면에 기포가 관찰되었으며, 40℃, 80% RH일 때 건조도막 기초물성이 KS F 3211 성능기준이하로, 우레탄 방수재 도포에 있어 시공환경조건의 하자원인 중 바탕판의 함수조건 및 양생 시 절대습도가 중요한 요인임을 확인하였다.

• 건축역사연구
• /
• 제20권4호
• /
• pp.61-80
• /
• 2011

This study estimated the prototype of Yangjindang at the time of its foundation by putting together the literature and discovered data and historical research on family related to Sangju Yangjindang, and looked at its architectural characteristics. These are summarized as follows: First, Yangjindang is an office building which was completed in three years [1629] after its start of construction when Keomgan Jojeong was at the age of 72 [1626] in his latter days and it was used for performing ancestral rites for Jojeong's forefathers of the head family of Pungyang Jo by family origin. Yangjindang was founded as a base of utopia for putting ancestral rites & commemoration, harmoniousness of a tribe, and educational idea into practice together with Ojakdang. Such a movement can be judged to interpret and apply the circumstances of the times realistically and flexibly where they tried to pursue the promotion of Confucianism & studies of the proprieties as well as the consciousness of practice, and to bring a tribe into harmony after the war through the retirement of Toegye School. Second, it is located at a topographically ideal spot on the edge of the Jangcheon-a tributary of Nakdong with a good physiology and landscape and its location was also the lot for a house of Jojeong's ancestor, which was burned down by war. Behind such a location and planning of Yangjindang, it is presumed, though not certain that it was modelled after Naeap village at Andong- Jojeong's parents-in-low's home. Third, as for its foundation size, it's a head house as much as about more than 100-kan, and its structure is composed of Samyo, Bonche, and Yangjindang. In addition, arrangements of buildings and its composition system and renovation procedures followed Chu-tzu Garyoe. Composition of Samyo can be restored to Yangjindang, Jugo, Woesammun, and Samyo; however, there has been no case of existence in case of Jugo building composition & arrangement takes on an aspect of a compromise between Gamyojido and Sandangjido of Garoe, which seems to be the result from flexibly interpreting and applying the rituals and studies of the proprieties of Toegye School in keeping with locational topography and realistic circumstances while making it a principle for them to observe by Toegye School. There exists a difference between Bonche and its counterpart of the upper class housing at Sangju district in that Bonche[main building] is a squre-shaped 'Ttuljip' typical of Andong setting a family ancestral ritual as a main function. Fourth, there existed a lot of hardships in raising money to cover repairs in time of doing repairs to this structure after 180 years since its establishment. In case of the repair work on Bonche, the level of renovation was limited to the replacement of old materials for rafters, doorpost, roof members and railings with new materials, together with partial alterations in case of window system. It is estimated that Yangjindang was renovated in 1808, and afterwards it was renamed Okryujeong after being re-built at another site. Through the repairs, the floor was expanded for the clan's meeting, and angle rafters and roof members were mended as well. Especially, the plane and structure of Okryujeong which was re-built at another site are expected to give clues to its restoration due to the resemblance to original appearance of Yangjindang at the time of its renovation in 1808.

• 한국조경학회지
• /
• 제45권5호
• /
• pp.87-96
• /
• 2017

본 연구는 안동 하회마을을 대상으로 1970년대 이후 현재에 이르기까지 담장의 형태적 변화양상을 파악하고자 소재 및 형태, 분포 중심의 변화과정을 4시기로 구분하고, 이에 따른 특성을 살펴본 결과는 다음과 같다. 첫째, 안동 하회마을이 문화재로 지정되기 이전인 1970년대는 마을 중심부의 토담에 기와를 얹은 형태가 주를 이루고 있었으며, 마을 외곽부에서는 토담에 볏짚이나 솔잎 등을 올리거나 담장을 설치하지 않을 경우, 싸리담을 두르기도 하였다. 둘째, 1980년대 문화재 지정 이후에는 초기단계의 문화재 정비가 이루어졌으나, 대부분 퇴락가옥 보수나 기반시설 정비에 중점을 두고 있어 담장에 대해서는 문화재 지정 이전의 분포와 큰 변화가 확인되지 않았다. 셋째, 과거 하회마을의 입지 특성상 담장에 돌을 사용하기 어려운 실정이었으나 1990년대에 들어서면서 토석담으로의 대거 교체가 확인되었으며, 이전시기에 비해 머리부에 기와를 사용한 사례가 증가되었다. 이전시기 주를 이루던 토담의 비중은 감소하였으며, 이러한 양상은 2000년대까지도 지속된 것으로 보인다. 넷째, 현장조사를 통해 오늘날 하회마을의 담장을 살펴본 결과, 마사토에 시멘트, 강회, 자갈 등을 섞은 몸체가 마을 대부분의 담장을 이루고 있었으며 이엉을 얹은 담장과 싸리담의 범위는 마을 외곽부의 일부로 축소되었다. 다섯째, 1970년대부터 현재에 이르기까지 나타나는 하회마을 담장의 변화특성으로 새로운 소재의 사용빈도 증가와 기존 가옥의 담장교체에 따라 머리부에 기와를 얹은 가옥 범위의 확대 등이 도출되었으며, 그 요인은 풍수적 가치 퇴조, 원형 기록에 대한 부족, 건축물 외 시설에 대한 인식 및 전문성 결여, 기타 담장 정비에 대한 마을 주민간의 관계 등으로 확인되었다.

• 한국조경학회지
• /
• 제39권4호
• /
• pp.11-17
• /
• 2011

본 연구는 한 중 옥상녹화의 법률을 분석하여 법규 및 지원제도상의 문제점을 파악하고, 그에 따른 보완점을 종합적으로 검토하여 옥상녹화의 법규 및 지원제도 개선 방안을 제시하였다. 연구 결과, 첫째, 구조안전 측면은 옥상녹화의 가장 중요한 조건이다. 따라서 옥상에 하중안전을 위하여 옥상녹화 설계 시 시공재료의 중량, 우수와 설(雪) 하중에 대한 영향, 방문자의 수용량을 정확하게 계산해야 한다. 둘째, 설계기준으로 방수 및 방근재료는 지역에 따라 적합하게 사용해야 한다. 셋째, 유지관리는 식물, 시설물, 토양 등으로 구분하여 정기적인 점검과 보수가 필요하다. 넷째, 품질검사 기준으로 방수 및 방근 성능검사 기준과 식물생육 상황을 판단하는 기준이 있어야 한다. 방수 및 방근 성능은 옥상녹화의 가장 중요한 부분이기 때문에 시공 후 공사 품질을 엄격하게 수행하여야 한다. 다섯째, 옥상녹화 지원제도를 적극적으로 시행하고 보다 더 적극적이고 상세한 지원체계가 제시되어야 한다. 아울러 옥상녹화 의무화 규정을 더 강화시킬 필요가 있다.

• 생물환경조절학회지
• /
• 제28권4호
• /
• pp.388-395
• /
• 2019

The purpose of this study is to suggest structural model and analyze design factors for the development of small greenhouse standardization model. The average dimensions of small greenhouse desired by urban farmers were 3.3m in width, 1.9m in eaves height, 2.7m in ridge height, 5.7m in length. The cladding materials for small greenhouse were preferred to glass, PC board and plastic film, framework to aluminum alloy and steel, and heating method in electrical energy. In addition, it was analyzed that small greenhouses need to develop structural model by dividing them into entry-level type and high-level type. The roof type that was used for entry-level type was arch shape, framework was steel pipe, cladding material was plastic film. On the other hand, high-level type was used in even span or dutch light type, framework with square hollow steel, cladding materials with glass or PC board. In consideration of these findings and practicality, this study developed four types of small greenhouses. The width, eaves height, ridges height, and length of the small greenhouses of even span type, which were covered with 5mm thick glass and 6mm thick PC board were 3m, 2.2m, 2.9m, and 6m, respectively. The small greenhouse of dutch light type covered with 5mm thick glass was designed with 3.8m in with, 2.2m in eaves height, 2.9m in ridges height, and 6m in length. The width, eaves height, ridges height, and length of the arch shape small greenhouse covered with a 0.15mm PO film were 3m, 1.5m, 2.8m, and 6m, respectively.

• 한국축산시설환경학회지
• /
• 제1권1호
• /
• pp.9-19
• /
• 1995

This study was carried out to investigate the effect of sawdust bedding barn on manure handing, management labour and physiological aspect of dairy cows, and then to establish the criteria on the optimum utilization method of sawdust bedding barn. 46 tie stall barns and 49 sawdust bedding barns were surveyed to cmopare the milk productivity between two different barns, and also 5 tie stall barns, 15 sawdust bedding barns and 1 rice hull bedding barn were selected to study the utilization situation of sawdust barn in Kyung-Ki province area. The major results obtained were as follows; 1. The roof material of sawdust barn were consisted of 66% vinyl house, 23% PVC light and 11% slate and galvanum coated tin. Most of the floor structure was earth ground with the rate of the approximately 82%. 2. The average occupied area of sawdust bed per cow was 15.2 $m^2$, depth that 30 cm and the utilization period was 12 months. 3. Milk Yield was significantly higher at sawdust barn than at tie stall barn(P<0.01). Bacterial and somatic cell count in raw milk were less at the sawdust barn than in tie stall barn. However, there was not significance difference between two barns. 4. The labour hour needed to cow management in the sawdust barn was approximately 48% of that of tie stall barn. 5. The temperature and moisture content measured in sawdust bed were closely affected by seasonal ambient temperature. The skin and hair of cow were much cleaner at the PVC light roofed sawdust barn than any other roof materials. 6. The additives used for improving of fermentation did not show any effect on temperature and moisture content in sawdust bed. When the ambient temperature was $30.4^{\circ}C$, the surface temperature of measured 1 cm above the sawdust bed was $12.2^{\circ}C$ lower and the temperature of 100 cm above the sawdust bed was $2.4^{\circ}C lower under shading net facility than that of vinyl roofed one.7. The hoof length of miking cow was 7.95 cm in tie stall and 9.19 cm in sawdust barn with high significance (P<0.01). And disease occurence such as mastitis and foot-rot tended to decrease in the sawdust barn. 8. The number of total bacteria and coliform bacteria were less in the sawdust bed compared with earth ground resting area. And a parasite strongyloides papillosus was detected but without any infected cow. 9. The nitrate($NO_3N$) content in non-roofed earth ground resting area and earth ground under the sawdust bed was likely to pollute the ground water. 10. In economic point of view, rice hull bedding barn was the cheapest among different systems. And in the sawdust bedding barn PVC light + slate roofed barn was most desirable, and vinyl roofed one the least.