• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.216-222
• /
• 2004

The caster roll shells have the good thermal conductivity and the low thermal expansion and have to exhibit high enough strength and good ductility at temperature up to $600^{\circ}C$. Thermal stress in particular is very high due to the contact with the liquid aluminium. The main stresses are of thermal origin, which bring a plastic fatigue on surface. This paper will represent one survey about the investigation of the failure of roll shells for continuous casters and an analysis using the simulation of the temperature distribution and the state of stress during hot rolling. Moreover, there will be a discussion on the roll shell of Mod. HAR 5 which is developed by heat treatment process. Mod. HAR 5 has advantages of high strength, high toughness and increased thermal stress resistance while maintaining the same productivity as the conventional roll.

• 한국기계가공학회지
• /
• 제11권6호
• /
• pp.82-87
• /
• 2012

The purpose of this study is to produce a side impact beam with high tensile steel using a roll forming process. The door side impact beam plays an important roll in a car because it protects passengers from external crash. The roll forming process is a continuous bending process wherein a long metal sheet is bended as it continuously passes several rolls. The characteristic of this study is that an impact beam is produced by a continuous process using a ultra high strength steel without a hardening heat treatment. A model was determined by analysing plasticity of a cross section shape considering high strength. Design parameters of the impact beam was determined by crash-analysing the model. Workpiece products were manufactured by designing dies for roll forming and setting them up in a following process line. Results of a bending test and a FEM analysis was considered and reviewed.

• 한국정밀공학회지
• /
• 제29권8호
• /
• pp.840-844
• /
• 2012

Roll forming process is a sheet metal forming process where the forming occurs with rolls in several steps, often from an undeformed sheet to a product ready to use. And each pair of forming rolls installed in a forming machine operates a particular role in making up the required final cross-section. This process used to many industry manufactures and recently apply to automotive industry. This study, FEM simulation applied bumper reinforcement using SHAPE-RF software and analyzed about total effective strain, longitudinal strain, thickness according to the roll-pass.

• The Journal of the Acoustical Society of Korea
• /
• 제16권2E호
• /
• pp.47-54
• /
• 1997

This paper presents two results on intersymbol interferences in baseband digital communication over an additive white Gaussian noise channel-the interferences due to mismatched square-root raised-cosine filters, in which the filters have different roll-off factors, and / or due to sampling-time jitter. The result for the mismatched filters is that even the jitter-free sampling causes intersymbol interference and it is negligibly small for a wide range of signal-to-noise ratio up to 10dB, for the roll-off factor ranging from 0.2 to 0.5, the mismatch loss being within 0.1dB from the optimum at around 10-6 .For jitter interference an approximation formula for the bit error probability is derived in case of the matched filters, which shows how the roll-off factors and the amount of jitter affect the system performance. The formula is reasonably accurate.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 제7회 압연 심포지엄
• /
• pp.111-114
• /
• 2009

Production of rolled steel has been growing partly supported by the advancement of rolls and rolling mills. Aiming at the further improvement in roll performance, various new techniques such as centrifugal casting, double poured casting cast steel, special build-up making, etc. have been introduced in the field of roll manufacture in these several years. The present paper describes the development of horizontal cast rolls(sleeve and indefinite chilled roll) made by Hyundai Steel and the results of mill tests. The developed roils are contributing the improvement of final products.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.65-66
• /
• 2006

Dancer systems are most widely used mechanism for attenuation of tension disturbances. Lately, demands fur high speed converting machines over 500mpm(m/min) are raising but domestic converting industries can not come up with the machines because capacities for a designing of the converting machine are restricted lower than 300mpm. Moreover roll-to-roll is attracted flexible display manufacturer's attention as a effective method for productivity. A constant tension level in the span before the first printing cylinder is the key of high speed quality printing. This paper presents a modeling and simulations of dancer systems on converting machines.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.93-95
• /
• 2007

Studies on ski-end shape control at the top end of rolling plate in heavy thick plate mill by using FEM analysis and measuring system have been performed. Plate shape behaviour at the top-end on rolling by the two different methods in finishing rolling process has been observed. One is to minimize the height of ski-end by using pass line based on the relational model between shape factor and pick-up and the other one is to prevent turn down problem caused by the impact between table roller and down bended plate on rolling by using roll speed difference. To minimize the height of ski-end, the prediction models based on the FEM analysis and measuring data was developed. The control method of ski - end shape on finishing rolling process was applied in actual mill and the height of ski-end was reduced by about 50% compared with conventional operation.

• 한국컴퓨터정보학회논문지
• /
• 제12권1호
• /
• pp.51-56
• /
• 2007

음악을 분류하기 위해 특성함수를 사용하여 추출한 특성값 벡터를 사용한다. 본 실험에서는 특성값 벡터를 추출하기 위해 스펙트랄 롤오프, 분산, 평균 피크레벨을 사용하였다. 이중에서 스펙트랄 롤오프는 저음프레임과 고음프레임의 상대적인 비를 나타낸다. 최적의 롤오프 포인트를 찾기 위하여 롤오프 포인트를 0.05에서 0.9까지 0.05간격으로 증가시키며 반복실험 하였다. 롤오프 포인트를 증가시키며 분류성공률을 관찰하였다. 그리고 실험에 사용된 음원데이터는 바로크바이올린과 현대바이올린 연주이다. 두 종류의 악기는 모양과 주파수대역에 있어서 유사하지만 약간의 대역차와 질감의 차이를 가지고 있다. 이러한 특성이 최적의 롤오프 포인트를 찾는데 유용할 것으로 판단하였다. 실험결과 롤오프 포인트 0.85에서 가장 높은 분류성공률 85%를 나타냈다.

• The Journal of Korean Physical Therapy
• /
• 제25권3호
• /
• pp.149-154
• /
• 2013

Purpose: Spinal instability due to weakness of abdominal muscles is one of the major causes that induces low back pain (LBP). The purpose of this study was to investigate any differences in abdominal muscle activity during curl up, roll out, and jack knife exercises using a swiss-ball or sling. Methods: Twenty healthy subjects were randomly assigned into either a swiss-ball exercise group (SBEG) or a sling exercise group (SEG). Subjects performed curl up, roll out and jack knife exercises using the swiss ball or sling. Activity of abdominal muscles (rectus abdominis and external oblique muscle) was assessed using surface EMG and normalized maximal voluntary isometric contraction (MVIC). The significance of differences between the sling exercise group and the swiss-ball exercise group was evaluated by the independent t-test. Results: These Results indicated that activities of rectus abdominis on right and left of the SEG during the curl up exercise were significantly greater than the SBEG. During the roll out exercise, activity of the abdominal muscle was not significantly different between the SEG and SBEG. In addition, during the jack knife exercise, activities of the right rectus abdominis and left external oblique muscle in the SEG were significantly greater than the SBEG. Conclusion: In conclusion, activity of the abdominal muscles was maximized when curl up and jack knife exercise were performed using the sling rather than the swiss-ball. Therefore, if increased activation of the abdominal muscle is the goal of an exercise program, curl up and jack knife exercises may be useful.

• 한국공작기계학회논문집
• /
• 제17권3호
• /
• pp.78-85
• /
• 2008

Roll forming process is one of the most widely used processes in the world for forming metals. It can manufacture goods of the uniform cross section throughout the continuous processing. However, process analysis is very difficult because of the inherent complexity. Therefore, time is consuming and much money are needed for manufacturing goods. In order to overcome this difficulty, a new computational method based on the rigid-plastic finite element method is developed for the analysis of roll forming process. In this paper, the design of roll forming process and the simulation are performed to manufacture the upper member at under rail composed of three members. The cold rolled carbon steel sheet(SCP-1) is used in this simulation, and a flow stress equation is set up by conducting the tensile test. The upper member is designed using two types of design for a excellent design. Each types are simulated and compared with the strain distribution using SHAPE-RF software. In addition, the numerical magnitude of bow and camber which are the buckling phenomenon is estimated.