• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.163-164
• /
• 2006

A QM-ISP-4 Planetary Mill was employed to activate mechanically the mixtures of anatase and corundum at room temperature for different times. The milled powder mixtures were then sintered at $1300^{\circ}C$ for 1 h. The XRD results showed that the milled powder mixtures were completely transformed into $Al_2TiO_5$ after sintering, except the mixtures milled for 5 and 10 hours. The SEM observations showed the typical morphology of rod-like $Al_2TiO_5$ vary in the range: widths from 0.6 to $1.2\;{\mu}m$, and lengths from 3.0 to $6.0\;{\mu}m$. The rod-like $Al_2TiO_5$ formation was attributed to the positive effects caused by the mechanical activation.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.560-574
• /
• 1997

The present study was undertaken to investigate the crystal growth onto human enamel mineral and synthetic hydroxyapatite(HA) seeds in media resembling the enamel fluid composition. Effects of fluoride at high concentrations on the precipitation were also examined in a bench-top crystal growth model adopting a miniaturized reaction column. The Ca, P and F concentrations and pH values of the inlet and outlet solutions were determined. The recovered solid samples were weighed to assess the amount of minerals precipitated during the experimental period, and finally viewed under a scanning electron microscope. Remarkable findings were that 1) both biological and synthetic seeds with the same total surface areas yielded similar amounts of crystal growth, 2) the amount of crystal growth was accelerated in a manner depending on fluoride concentrations in the media, 3) SEM observations disclosed that without the addition of fluoride, precipitation of thin, plate-like OCP crystals became prominent, but by increasing the fluoride concentration(beyond 1ppm F), rod-like crystals having a pointed edge were most frequently observed, without any evidence for precipitation of the plate-like crystals. Furthermore, the dimension of rod-like crystals was increased in proportion to fluoride concentrations, 4) there was no difference in the morphological feature of precipitated mineral phase upon seeding between human enamel seed and synthetic HA seed. The overall results support the view that the seeded crystal growth model is of value to gain insight into the mechanism of enamel crystal growth under fluoride regimens.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.271-272
• /
• 2009

We fabricated a hybrid aligned film using reactive rod-like mesogen to reduce light leakage of twisted nematic(TN) cell in off-axis of the dark state. We proved that the fabricated compensation film has hybrid alignment by changing phase retardation according to polar angle. In this paper, we confirmed characteristics of compensation film through simulation results and found the matching factor of simulation results and experimental result. In result, the maximum pretilt angle of hybrid compensated film is $19^{\circ}$ which has phase retardation 0.1445.

• Journal of the Korean Chemical Society
• /
• v.52 no.2
• /
• pp.164-168
• /
• 2008

CaWO4 crystals were synthesized by a microemulsion method. Various sizes and shapes of CaWO4 were obtained by changing the molar ratio (w) of H2O to CTAB. At w=5 and 10, oval CaWO4 crystals with length of 100 nm and 500 nm were obtained, respectively. At w=20, rod-like CaWO4 crystal with length of 1 μm was obtained. The sphere CaWO4 crystal with length of about 2~3 μm was obtained at w=30. The CaWO4 crystal morphology changes from oval to sphere via a rod by aggregation with increasing the molar ratio of H2O to CTAB.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.5
• /
• pp.203-206
• /
• 2001

The applicability of shaped growth of yttrium orthovanadate was approved by successful growth of rod-like single crystals with the rectangular shape. Nd-doped single crystals with content of $Nd^{3+}$ ions of 1,2,3,5 atomic % in the starting melt were grown by the EFG technique with the size up to $10^{*}10mm$ in section and up to 85 mm in length. For the testing of the multiple growth of the orthovanadates, two and three Nd-and Yb-doped $YVO_{4}$ single crystals were grown by the EFG technique simultaneously up to 110 mm in length.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.390-391
• /
• 2007

We have studied improvement of light leakage of twisted nematic liquid crystal display (TN-LCD) in dark state using the hybrid aligned compensation film made of rod-like LC. When the voltage is applied properly to the TN-LCD, the director tilts up but LC director on the substrate don't tilts up due to surface anchoring energy of the LC cell. Accordingly, LC director from surface to middle LC of TN -LCD become hybrid state such as hybrid aligned film. Consequently, in this paper we achieve wide viewing angle performances of TN mode using developed hybrid aligned film which especially decreases light leakage at vertical direction in dark state.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.324-331
• /
• 1998

After the addition of yttrium aluminum garnet of 2, 5, 10 mol% as a sintering aid, $\alpha$-silicon carbides were prepared by a liquid-phase sintering at $1850^{\circ}C$, and the microstructural evolution was investigated during sintering as functions of liquid-phase amount and sintering time. The highest apparent density in each compositions was obtained in specimens sintered for 2 h, and the percentage of weight loss increased with sintering time. By increasing the amount of sintering aid (yttrium aluminum garnet), the rate of grain growth during sintering decreased, but the apparent density of sintered body increased. The phase transformation from 6H-SiC to 4H-SiC was partially observed in specimens sintered for a long time, and so, a few rod-like grains were observed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.3
• /
• pp.126-132
• /
• 2002

The nanocrystalline zirconia powder with anisotropic shapes was synthesized by hydrothermal treatment of the tetragonal zirconia prepared by aging the zirconium hydroxide precipitate, which was obtained from the reaction between $ZrOCl_2{\cdot}8H_2O$ and KOH solutions under the fixed pH of 13.5, at $100^{\circ}C$ for 24 h. With increasing the hydrothermal reaction temperature and time, the fraction of tetragonal phase with spherical zirconia decreased, whereas, relatively the fraction of monoclinic phase with spindle-like and rod shape zirconia increased. As increased concentration of the NaOH solution it promoted the particle size to become larger and the crystalline phase to transform tetragonal to monoclinic. However, the specific surface area at the early stage of the reaction increased and subsequently decreased because of grain growth in powder with longer reaction time.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.3
• /
• pp.149-156
• /
• 2002

Europium-activated $Ga_2O_3$ phosphor powders were prepared by homogeneous precipitation method. The resulting powders were characterized by means of TG/DTA, XRD, FT-IR and SEM, Two kinds of powders formed were the crystalline GaOOH and the amorphous-like $\gamma$-$Ga_2O_3$ phases. When the urea concentration was below 0,5 M, rod-like micrometer-sized GaOOH powders were formed. They were transformed via $\alpha$-$Ga_2O_3$ to $\beta$-$Ga_2O_3$ phases under heat treatment. On the other hand, the nanometer-sized $\gamma$-$Ga_2O_3$ powders were formed with urea concentrations higher than 1.0 M, and they were directly changed into $\beta$-$Ga_2O_3$.Photoluminescence (PL) spectra were observed at room temperature, and PL intensities of nanometer-sized $Ga_2O_3$ : $Eu^{3+}$ powders around 610 nm were higher than those of micrometer-sized ones.

• Korean Journal of Materials Research
• /
• v.29 no.7
• /
• pp.432-436
• /
• 2019

Zinc oxide(ZnO) micro/nanocrystals are grown via thermal evaporation of ZnO powder mixed with Mn powder, which is used as a reducing agent. The ZnO/Mn powder mixture produces ZnO micro/nanocrystals with diverse morphologies such as rods, wires, belts, and spherical shapes. Rod-shaped ZnO micro/nanocrystals, which have an average diameter of 360 nm and an average length of about $12{\mu}m$, are fabricated at a temperature as low as $800^{\circ}C$ due to the reducibility of Mn. Wire-and belt-like ZnO micro/nanocrystals with length of $3{\mu}m$ are formed at $900^{\circ}C$ and $1,000^{\circ}C$. When the growth temperature is $1,100^{\circ}C$, spherical shaped ZnO crystals having a diameter of 150 nm are synthesized. X-ray diffraction patterns reveal that ZnO had hexagonal wurtzite crystal structure. A strong ultraviolet emission peak and a weak visible emission band are observed in the cathodoluminescence spectra of the rod- and wire-shaped ZnO crystals, while visible emission is detected for the spherical shaped ZnO crystals.