• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.592-599
• /
• 2004

Talus topography is that weathered rock clasts were accumulated dropping in steep slope to action of gravity. Rock fall talus is formed by the accumulation of rock debris falling as individual particles from a cliff. If the collapse is produced in talus slope. it will be possible the loss of manpower and country. Despite correct access about talus is required, domestic research was scientific access about talus short because of short resolution of aerophoto and difficulties of research about huge talus. In this Study, Our research team analgize the wetness index using the geomorphogical data. Lineament through wetness index is simillar with distribution of the talus. And, the aim of the present study is to review and compare fabric data derived from rock fall talus about orientation, distribution and morphology. These deposits tend to have approximately equal amounts of clasts oriented parallel and perpendicular to the dip direction of the slope. And, platy- shaped clasts dominate the proximal and intermediate parts of the talus, wheres blocky-shaped clasts is more common in the distal part. we carry out Rock Fall Simulation. And, We install criteria of the rockfall protective barrier using talus and geomorphological characteristics.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.469-474
• /
• 2003

Talus topography is that rock clasts that is weathered is accumulated dropping in steep slope to action of gravity. Rock fall talus is formed by the accumulation of rock debris falling as individual particles from a cliff. If the collapse is produced in talus slope, it will be possible the loss of manpower and country. Despite correct access about talus is required, domestic research was scientific access about talus short. The aim of the present study is to review and compare fabric data derived from rock fall talus about orientation, distribution and morphology in Sukam area. These deposits tend to have approximately equal amounts of clasts oriented parallel and perpendicular to the dip direction of the slope. And, platy-shaped clasts dominate the proximal and intermediate parts of the talus, whereas blocky-shaped clasts is more common in the distal part.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.165-182
• /
• 1997

The aim of this paper is to clarify geomorphic features on talus within ${\check{O}}rumkol$ and the origin of ${\check{O}}rumkol$. ${\check{O}}rumkol$ is located in Milyang of Kyungnam province, in South Korea. ${\check{O}}rumkol$ is good area to study talus. because it is characterized by following three geomorphic landscapes : free face surrounding ${\check{O}}rumkol$ ; ${\check{O}}rumkol$ with deep and wide valley floor ; lots of taluses typically developing within ${\check{O}}rumkol$. The main results can be summarized as follows: 1) The origin of ${\check{O}}rumkol$ may be suggested two assumptions : one is that its origin have been resulted from intrusion structure(intrusive rock might capture less resistant rock as tuff) ; the other is that its origin have been resulted from volcanic depression after intrusion or eruption. But these assumptions are not obvious. therefore more geological evidences will be supplemented after this 2) The characteristics of ${\check{O}}rumkol$ talus (1) Pattern ${\check{O}}rumkol$ taluses are tongue-shaped or cone-shaped in appearance. They are $50{\sim}200m$ in length and the range of the maximum width from 25 to 115m and one of their mean slope gradient from 32 to $36^{\circ}$ (2) Origin ${\check{O}}rumkol$ taluses have been formed under periglacial environment in the last glacial age and they are classified into rock fall talus type, considering in conjunction with the shape, hardness, sorting, weathering conditions of constituent debris. (3) The stage of landform development ${\check{O}}rumkol$ talus slope profiles are mainly concave slope. This concave slope type was eventually caused by talus creep at the lower end of the talus. That means new additions of debris from the free face have virtually ceased and there is no evidence of recent motion in the deposit. Now it is predominant that vegetation cover is gradually increasingly. Therefore ${\check{O}}rumkol$ taluses appear to be relict form stage. at present.

• Journal of the Korean association of regional geographers
• /
• v.2 no.2
• /
• pp.173-182
• /
• 1996

The intent of this paper is to examine the talus in Chon-hwang-san in the southern part of Korean Peninsula, and then analyze its geomorphic feature and origin. The research is summarized as follows; (1) The talus is 220m long and the range of the width from 10 to 75m. The mean gradient is $33^{\circ}$ and the mean block size is $110{\times}59cm$(long axis$\times$short axis). The overall appearance of the talus is tongue-shaped and the geology of the constituent blocks is dacite. (2) This talus has two particular geomorphic landscapes. One is that the talus has not free face as source of blocks back of itself; the free face of the talus has been parallel retreated to disappearance by frost attack. The other is that the upper part of the talus is on the ridge. (3) This talus is classified into rock fall talus type, and the shape of rock fragments is angular. When considered in conjunction with face of being mentioned above, the morphology and lithology of the talus are best explained on the basis of origin under periglacial environment during late pleistocene time. (4) Most constituent rock debris are now lichen-covered, or covered with a mantle of weathering. There is no evidence of appreciable movement and for supplying block. Therefore, the talus appears to be relict or fossil form stage, currently.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.1171-1182
• /
• 2009

The purpose of this case study is stability security in Talus and Coal Shale. The failure possibility of Talus area is high because of ground loss. The Coal Shale area is very week and large scale sliding possibility is high.

• Journal of the Korean association of regional geographers
• /
• v.4 no.2
• /
• pp.49-64
• /
• 1998

Bing-gye valley(Kyongbuk Province, South Korea) is well known as a tourist attraction because of its meteorologic characteristics that show subzero temperature during midsummer. Also, there are some interesting geomorphic features in the valley area. Therefore, the valley is worth researching in geomorphology field. The aim of this paper is to achieve two purposes. These are to clarify geomorphic features on talus within Bing-gye valley area, and to infer the origin of Bing-gye valley. The main results are summarized as follows. 1) The formation of Bing-gye valley It would be possible to infer the following two ideas regarding the formation of Bing-gye valley. One is that the valley was formed by differential erosion of stream along fault line, and the other is that the rate of upheaval comparatively exceeded the rate of stream erosion. Especially, the latter may be associated with the fact that the width of the valley is much narrow. Judging that the fact the width of the valley is much narrow, compared with one of its upper or lower valley, it is inferred that Bing-gye valley is transverse valley. 2) The geomorphic features of talus (1) Pattern It seems to be true that the removal of matrix(finer materials) by the running water beneath the surface can result in partly collapse hollows. Taluses are tongue-shaped or cone-shaped in appearance. They are $120{\sim}200m$ in length, $30{\sim}40m$ in maximum width. and $32{\sim}33^{\circ}$ in mean slope gradient. The component blocks are mostly homogeneous in size and shape(angular), which reflect highly jointed free face produced by frost action under periglacial environment. (2) Origin On the basis of previous studies, the type of the talus is classified into rock fall talus. When considered in conjunction with the degrees of both weathering of blocks and hardness of blocks, it can be explained that the talus was formed under periglacial environment in pleistocene time. (3) The inner structure of block accumulation I recognize a three-layered structure in the talus as follows: (a) superficial layer; debris with openwork texture at the surface, 1.3m thick. (b) intermediate layer: small debris(about 5cm in diameter) with fine matrix(including humic soil), 70cm thick. (c) basal layer: over 2m beneath surface, almost pure soil horizon without debris (4) The stage of landform development Most of the blocks are now covered with lichen, and/or a mantle of weathering. It is believed that downslope movement by talus creep well explains the formation of concave slope of the talus. There is no evidence of present motion in the deposit. Judging from above-mentioned facts, the talus of this study area appears to be inactive and fossil landform.

• Journal of the Korean Geographical Society
• /
• v.28 no.2
• /
• pp.77-98
• /
• 1993

The intent of this study is to analyze the characteristics of distribution, patter, and deposits of the exposed debris slope landform by aerial photography interpretation, measure-ment on the topographical maps and field surveys in the southern part Taebaek mountains. It also aims to research the arrangement types of mountain slope and the landform development of debris slopes in this area. In conclusion, main observations can be summed up as follows. 1. The distribution characteristics 1)From the viewpoint of bedrocks, the distribution density of talus is high in case of the bedrock with high density of joints, sheeting structures and hard rocks, but that of the block stream is high in case of intrusive rocks with the talus line. 2)From the viewpoint of bedrocks, the distribution density of talus is high in case of the bedrock with high density of joints, sheeting structures and hard rocks, but that of the block stream is high in case of inrtusive rocks with the talus line. 2) From the viewpoint of distribution altitude, talus is mainly distributed in the 301~500 meters part above the sea level, while the block stream is distributed in the 101~300 meters part. 3) From the viewpoint of slope oriention, the distribution density of talus on the slope facing the south(S, SE, SW) is a little higher than that of talus on the slope facing the north(N, NE, NW). 2. The Pattern Characteristics 1) The tongue-shaped type among the four types is the most in number. 2) The average length of talus slope is 99 meters, especially that of talus composed of hornfels or granodiorite is longer. Foth the former is easy to make free face; the latter is easdy to produce round stones. The average length of block stream slope is 145 meters, the longest of all is one km(granodiorite). 3) The gradient of talus slope is 20~45${^\circ}$, most of them 26-30${^\croc}$; but talus composed of intrusive rocks is gentle. 4) The slope pattern of talus shows concave slope, which means readjustment of constituent debris. Some of the block stream slope patterns show concave slope at the upper slope and the lower slope, but convex slope at the middle slope; others have uneven slope. 3. The deposit characteristics 1) The average length of constituent debris is 48~172 centimeters in diameter, the sorting of debris is not bad without matrix. That of block stream is longer than that of talus; this difference of debris average diameter is funda-mentally caused by joint space of bedrocks. 2) The shape of constituent debris in talus is mainly angular, but that of the debris composed of intrusive rocks is sub-angular. The shape of constituent debris in block stream is mainly sub-roundl. 3) IN case dof talus, debris diameter is generally increasing with downward slope, but some of them are disordered and the debris diameter of the sides are larger than that of the middle part on a landform surface. In block stream, debris diameter variation is perpendicularly disordered, and the debris diameter of the middle part is generally larger than that of the sides on a landform surface. 4)The long axis orientation of debris is a not bad at the lower part of the slope in talus (only 2 of 6 talus). In block stream(2 of 3), one is good in sorting; another is not bad. The researcher thinks that the latter was caused by the collapse of constituent debris. 5) Most debris were weathered and some are secondly weathered in situ, but talus composed of fresh debris is developing. 4. The landform development of debris slopes and the arrangement types of the mountain slope 1) The formation and development period of talus is divided into two periods. The first period is formation period of talus9the last glacial period), the second period is adjustment period(postglacial age). And that of block stream is divided into three periods: the first period is production period of blocks(tertiary, interglacial period), the second formation period of block stream(the last glacial period), and the third adjustment period of block stream(postglacialage). 2) The arrangement types of mountain slope are divided into six types in this research area, which are as follows. Type I; high level convex slope-free face-talus-block stream-alluvial surface Type II: high level convex slope-free face-talus-alluvial surface Type III: free face-talus-block stream-all-uvial surface Type IV: free face-talus-alluval surface Type V: talus-alluval surface Type VI: block stream-alluvial surface Particularly, type IV id\s basic type of all; others are modified ones.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.3
• /
• pp.47-59
• /
• 2017

This study aims to analyze geomorphologically Jaein Falls in Hantangang Lava Plateau for the landform structure, landform classification, falls dissection and recession. The height and recession length of the Falls are approximately 18m and 340m. after dissection valley arrive at area of the Jijangbong Volcanic Rock Complex of Mesozoic era, the fall will disappear. The structure of the dissection valley shows totally well vertical columnar joint near falls and plunge pool, colluvial talus deposits toward lower reach by the freezing-thawing and wet-dry activities, and alluvial cone and delta in estuary to Hantangang River. The Falls' age date and recession rate in the valley maybe relate to the age of the lava plateau. The estimated recession rate of the fall should be 8.75m/ka to 2.3m/ka, depending on the age 500ka to 40ka in lava plateau.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.2
• /
• pp.103-113
• /
• 2001

This study presents Quaternary sedimentation pattern around Dok-Island volcanoes (Dok Island and Dok Seamount), based on analysis of high-resolution (chirp) echo characters. Echo facies If, showing sharp, continuous bottom echo without subbottom reflectors, is recorded mainly from the flat tops of the volcanoes. This facies indicates sands and gravels (re) deposited by shallow marine processes. Echo facies IIA in the basin floor and basal slopes of the volcanoes and Oki Bank is characterized by semi-prolonged bottom and several parallel subbottom echoes. This facies reflects hemipelagic settling with intermittent influences of turbidity currents in the slope areas. Echo facies IIC is recorded from acoustically-transparent debrite masses on the basal slopes of the volcanoes and Oki Bank. Echo facies IIIA is characterized by irregular hyperbolic echoes in the slope areas of the volcanoes. It suggests hard rock basement or irregular volcanic edifices. Echo facies IIIC shows regularly-overlapping hyperbolic bottom echoes. It is interpreted to represent rock-fall deposits (talus) accumulated in the mid-slope area. Echo characters and topography suggest that the tops of Dok-Island volcanoes were flattened and lowered by shallow-marine erosional processes. The eroded sediments were transported to and deposited in the base of slope and basin plain mainly by debris flows and turbidity currents along submarine canyons and valleys.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.3
• /
• pp.261-272
• /
• 2014

Over the last three decades, advances in AMS (Accelerator Mass Spectrometry) and Noble Gas Mass Spectrometer make various application of terrestrial cosmogenic nuclides (CNs) to wide range of earth surface sciences possible. Dating techniques can be divided into three sub-approaches: simple surface exposure dating, depth-profile dating, and burial dating, depending on the condition of targeted surfaces. In terms of Korean landscape view, CNs dating can be applied to fluvial and marine terrace, alluvial fan, tectonic landform (fault scarp and faulted surfaces), debris landforms such as rock fall, talus, block field and stream, lacustrine and marine wave-cut platform, cave deposits, Pliocene basin fill and archaeological sites. In addition, in terms of lithology, the previous limit to quartz-rich rocks such as granite and gneiss can be expanded to volcanic and carbonate rocks with the help of recent advances in CNs analysis in those rocks.