• 한국환경과학회지
• /
• 제10권4호
• /
• pp.287-292
• /
• 2001

A packed bed of volcanic rock was used as deodorizing material to remove hydrogen sulfide($H_2$S) from air in a laboratory-scale column, and was inoculated with Thiobacillus sp. as $H_2S$ oxidizer. The effects of volcanic rock particle size distribution on system pressure drop were examined. Various tests have been conducted to evaluate the effect of $H_2S$ inlet concentration and CBCT(Empty Bed Contact Time) on $H_2S$ elimination. The pressure drop for particles of size range from 5.6 to 10 mm was 14 mm$H_2S$/m at a representative gas velocity of 0.25m/s. Biofilter using scoria and Thiobacillus sp. could get the stable removal efficiencies more than 99.9% under $H_2S$ inlet concentrations in the range from 30 to 1,100ppm at a constant gas flow rate of $15.2{\ell}$/min. $H_2S$ removal efficiencies greater than 99% were observed as long as EBCT was longer than 8sec at the 250ppm of $H_2S$ inlet concentration. When EBCT was reduced to 5.5 sec, $H_2S$ removal efficiency decreased by about 12 percent. The maximum $H_2S$ elimination capacity was determined to be 269g-$H_2S/m^3{\cdot}hr$.

• 한국터널지하공간학회 논문집
• /
• 제9권2호
• /
• pp.121-131
• /
• 2007

최근 암반구조물의 규모가 점차 대형.대단면화됨에 따라 암반 절리면이 자유면에 노출되는 경우가 빈번하게 발생할 수 있으며 지진, 발파와 같은 외부 동적 하중의 영향을 받을 가능성이 커지고 있으므로 다양한 동적 하중조건 하에서 암반 불연속면의 거동 특성 파악을 위한 연구의 필요성이 증대되고 있다. 본 연구에서는 전단속도의 변화에 따른 편평한 화강암 전단면의 마찰특성 변화를 알아보고자 다양한 조건하에서 직접전단시험을 수행하였다. 수행한 직접전단시험은 크게 두 가지로 나눌 수 있는데 첫 번째 시험에서는 시험이 수행되는 동안 각각 7가지의 일정한 전단속도로 전단변위가 발생되도록 하여 전단속도에 따른 마찰계수의 변화를 살펴보았으며, 두 번째 시험에서는 전단변위가 발생되는 중간에3가지 형태의 순간적인 전단속도 변화가 마찰특성에 미치는 영향을 살펴보았다. 수직응력과 전단속도의 변화에 따른 편평한 화강암의 마찰계수 변화는 가해진 수직응력 수준에 영향을 받는 것으로 나타났으며, 전단속도의 변화가 마찰거동에 영향을 미치기 시작하는 전이속도는 수직응력이 증가함에 따라 낮아지는 것으로 나타났다. 또한 전단속도가 느릴수록 stick-slip 거동에서의 응력 저하 폭이 커지는 경향을 보였다. 순간적인 전단속도 변화에 따른 정상 상태에서의 마찰계수 변화를 살펴본 결과 순간적인 속도의 증가에 따라 마찰계수가 감소하는 속도 연화 현상이 나타났으며, 느린 전단속도에서 전단속도의 변화에 따른 마찰계수의 감소폭이 빠른 전단속도에서의 변화에 따른 감소폭보다 더 큰 경향을 보였다.

• Geomechanics and Engineering
• /
• 제24권3호
• /
• pp.215-226
• /
• 2021

To study the evolution mechanism of cracks in rocks with multiple defects, rock-like samples with multiple defects, such as strip-shaped through-going cracks and cavity groups, are used, and the crack propagation law and changes in AE (acoustic emission) and strain of cavity groups under different inclination angles are studied. According to the test results, an increase in the cavity group inclination angle can facilitate the initial damage degree of the rock and weaken the crack initiation stress; the initial crack initiation direction is approximately 90°, and the extension angle is approximately 75~90° from the strip-shaped through-going cracks; thus, the relationship between crack development and cavity group initiation strengthens. The specific performance is as follows: when the initiation angle is 30°, the cracks between the cavities in the cavity group develop relatively independently along the parallel direction of the external load; when the angle is 75°, the cracks between the cavities in the cavity group can interpenetrate, and slip can occur along the inclination of the cavity group under the action of the shear mechanism rupture. With the increase in the inclination angle of the cavity group, the AE energy fluctuation frequency at the peak stress increases, and the stress drop is obvious. The larger the cavity group inclination angle is, the more obvious the energy accumulation and the more severe the rock damage; when the cavity group angle is 30° or 75°, the peak strain of the local area below the strip-shaped through-going fracture plane is approximately three times that when the cavity group angle is 45° and 60°, indicating that cracks are easily generated in the local area monitored by the strain gauge at this angle, and the further development of the cracks weakens the strength of the rock, thereby increasing the probability of major engineering quality damage. The research results will have important reference value for hazard prevention in underground engineering projects through rock with natural and artificial defects, including tunnels and air-raid shelters.

• 화약ㆍ발파
• /
• 제29권1호
• /
• pp.41-47
• /
• 2011

발파에 의한 암반손상영역을 평가하고 암반 파쇄도를 제어하기 위해서는 장약실 내 발생하는 폭발압력에 관한 정보는 중요하다. 이를 위하여 본 연구에서는 철, 알루미늄, 아크릴 재질의 센서에 대한 낙추 충격 시험으로부터 동적 변형률 신호를 측정하여 센서의 동적 응답 특성을 분석하였다. 철재 센서의 경우 충격하중에 가장 적은 변형률 출력 값을 보였으며 센서길이에 대한 출력 값의 변화는 적게 나타났다. 철제 센서를 뇌관의 충격하중 측정에 적용하였다.

• 한국농공학회논문집
• /
• 제58권4호
• /
• pp.85-95
• /
• 2016

PBT (Plate Bearing Test) is a commonly used compaction estimation used to provide basal support for embankments. This study presents the results from experimental evaluations PBT, LWDT (Light Drop Weight Tester) test and Geogauge test with embankment materials which consist in sandy soil, crushed stone and rock. The results of this study indicate that the regression analyze results (r) from test results between Young's modulus and $k_{30}$, $E_v$ are 0.385 and 0.111~0.496, estimated very lack of correlation. The Geogauge is frequency vibration from machine to underground. Geogauge can not measure to accuracy test results when it is used on ground of the rock or crushed stone. The regression analyze results (r) from $E_v$ and Dynamic modulus are 0.502~0.847, different estimated by calculate method, as it were, when calculate $E_v$, least square method are appeared more accuracy than gradient of secant.

• Geomechanics and Engineering
• /
• 제24권1호
• /
• pp.81-89
• /
• 2021

Uniaxial compression tests were conducted on sandstone-CGFB composite samples with different interface angles, and their strength, acoustic emission (AE), and failure characteristics were investigated. Three macro-failure patterns were identified: the splitting failure accompanied by local spalling failure in CGFB (Type-I), the mixed failure with small sliding failure along with the interface and Type-I failure (Type-II), and the sliding failure along with the interface (Type-III). With an increase of interface angle β measured horizontally, the macro-failure pattern changed from Type-I to Type-II, and then to Type-III, and the uniaxial compressive strength and elastic modulus generally decreased. Due to the small sliding failure along with the interface in the composite sample with β of 45°, AE events underwent fluctuations in peak values at the later post-peak failure stage. The composite samples with β of 60° occurred Type-III failure before the completion of initial compaction stage, and the post-peak stress-time curve initially exhibited a slow decrease, followed by a steep linear drop with peaks in AE events.

• 한국지반신소재학회논문집
• /
• 제18권4호
• /
• pp.1-13
• /
• 2019

본 연구는 건설현장에서 발생하는 암버력을 재활용하여 연약지반 개량재료로 활용가능한 동치환공법의 적용성과 연약지반 개량효과를 고찰하는 것을 목적으로 하고 있다. 암버력 매립층에서 동치환공법 적용시 지반보강 효과를 파악하기 위하여 현장지반 조사를 통해 수집한 암버력과 현장시료를 바탕으로 실내실험 및 현장시험을 수행하였다. 암버력의 전단시험을 통해 내부마찰각과 겉보기 점착력을 도출하였으며, 현장시료의 적용성과 문제점을 확인하고 동치환공법 적용시 필요한 중추의 무게, 낙하고, 타격횟수 등을 분석하여 동치환 특성을 파악하였다. 현장 평판재하시험과 밀도시험을 통하여 개량된 지반의 지지력과 침하량을 계측하였으며, 수치해석을 통해 개량지반의 거동을 예측하였다. 본 연구를 통해서 암버력 매립층의 동치환공법시 지반 실험계수 C_DR은 0.3~0.5로 수정 제안하였고, 100mm 이하 D₉₀은 80mm이하, D₁₅는 30mm이상의 입도범위를 가지는 암버력을 사용할 것을 제안하였다.

• Geomechanics and Engineering
• /
• 제17권4호
• /
• pp.333-342
• /
• 2019

Geological dynamic hazards during coal mining can be caused by the failure of a composite system consisting of roof rock and coal layers, subject to different loading rates due to different advancing velocities in the working face. In this paper, the uniaxial compression test simulations on the composite rock-coal layers were performed using $PFC^{2D}$ software and especially the effects of loading rate on the stress-strain behavior, strength characteristics and crack nucleation, propagation and coalescence in a composite layer were analyzed. In addition, considering the composite layer, the mechanisms for the advanced bore decompression in coal to prevent the geological dynamic hazards at a rapid advancing velocity of working face were explored. The uniaxial compressive strength and peak strain are found to increase with the increase of loading rate. After post-peak point, the stress-strain curve shows a steep stepped drop at a low loading rate, while the stress-strain curve exhibits a slowly progressive decrease at a high loading rate. The cracking mainly occurs within coal, and no apparent cracking is observed for rock. While at a high loading rate, the rock near the bedding plane is damaged by rapid crack propagation in coal. The cracking pattern is not a single shear zone, but exhibits as two simultaneously propagating shear zones in a "X" shape. Following this, the coal breaks into many pieces and the fragment size and number increase with loading rate. Whereas a low loading rate promotes the development of tensile crack, the failure pattern shows a V-shaped hybrid shear and tensile failure. The shear failure becomes dominant with an increasing loading rate. Meanwhile, with the increase of loading rate, the width of the main shear failure zone increases. Moreover, the advanced bore decompression changes the physical property and energy accumulation conditions of the composite layer, which increases the strain energy dissipation, and the occurrence possibility of geological dynamic hazards is reduced at a rapid advancing velocity of working face.

• 한국지반환경공학회 논문집
• /
• 제23권2호
• /
• pp.5-12
• /
• 2022

본 연구는 기존 낙석방지울타리의 시험 방법 중 수직 낙하시험을 중심으로 낙석방지울타리의 성능평가에 대한 시험방법을 제시하기 위해 현장시험을 실시하였다. 국내의 낙석방지울타리 지지 능력을 알아보는 시험은 보통 철망, 지주, 와이어로프를 합친 것으로 시험을 실시하며, 낙석의 충돌위치를 철망의 중앙을 중심으로 실시해 왔다. 하지만 실제 현장에서 낙석이 철망이 아닌 지주에 직접 타격했을 경우, 즉 지주에 직접 타격에 관한 국내 시험적 논문 및 데이터가 전무한 것으로 파악되었다. 따라서 낙석방지울타리(고속도로 형식 2호)를 중심으로 100kJ급의 낙석에너지에 대한 충격을 지주에 타격 했을 시 변위량을 분석하고 기존의 낙석방지울타리 시험과 비교·분석하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1992년도 가을학술발표회 논문집
• /
• pp.137-144
• /
• 1992

This paper reports a case study of dynamic consolidation. The objective of the study is to evaluate the effectiveness of ground improvement at the site for Hyundai Petrochemical Compound constructed at Daesan-Myeon, Seosan-Gun in the western shores of Korea. The site ground was prepared by filling on the existing soft marine deposit which consists of a loose granular soil layer and a medium stiff clay layer. For the stabilization of site ground, the compaction was executed in three different procedures with same pounder weigh, drop height and imprint spacing. The post investigation showed that the object was successfully achieved indicating a significant increase of bearing capacity of the treated ground. In this study the effectiveness of dynamic consolidation is evluated for various factors the applied energy, temping sequences, the radial distance from the imprint location and the depth of bed rock.