• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.654-659
• /
• 1993

In this paper, a robot controller that has a real time-multitasking OS (Operating System) is developed. It can do given jobs in realtime, so its effectiveness is increased. The controller has several CPU boards, and it is needed to communicate among these boards. For that reason, it is adopted VME bus system and VMEexec OS that can process multiprocess in realtime. Multiprocess includes robot language edit process, vision process, low level motion control process, and teach process in higher layer. And dynamics, kinematics, and inverse kinematics that require realtime calculation are included in lower layer.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.543-548
• /
• 2000

In this study, an interactive programming method for robot in electronic part assembly task is proposed. Many of industrial robots are still taught and programmed by a teach pendant. The robot is guided by a human operator to the desired application locations. These motions are recorded and are later edited, within the robotic language using in the robot controller, and play back repetitively to perform robot task. This conventional teaching method is time-consuming and somewhat dangerous. In the proposed method, the operator teaches the desired locations on the image acquired through CCD camera mounted on the robot hand. The robotic language program is automatically generated and downloaded to the robot controller. This teaching process is implemented through an off-line programming software. The OLP is developed for an robotic assembly system used in this study. In order to transform the location on image coordinates into robot coordinates, a calibration process is established. The proposed teaching method is implemented and evaluated on an assembly system for soldering electronic parts on a circuit board. A six-axis articulated robot executes assembly task according to the off-line teaching in the system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1840-1843
• /
• 1997

The task environment of a robot is changing rapidly and task itself becomes complicated due to current industrial trends of multi-product and small lot size production. A convenient user-interfaced off-line programming(OLP) system is being developed in order to overcome the difficulty in teaching a robot task. Using the OLP system, operators can easily teach robot tasks off-line and verify feasibility of the task through simulation of a robot prior to the on-line execution. However, some task errors are inevitable by kinematic differences between the robot model in OLP and the actual robot. Three calibration methods using image information are proposed to compensate the kinematic differences. These methods compose of a relative position vector method, three point compensation method, and base line compensation method. To compensate a kinematic differences the vision system with one monochrome camera is used in the calibration experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.502-507
• /
• 1990

The robot operation by teach playback is easy and was widely used for simple jobs performed by a simple robot manipulator. However, as robots and their control systems and tasks become more and more sophisticated, such a simple robot operation is no longer adequate and programming languages capable for the complicated systems and tasks are greatly needed. In this paper, a high-level robot-specific programming language, SAITEL, is presented. It is an interpreter, based on Assembly, and has form similar to BASIC. SAITEL is easy to use for people who are not skilled programmers, and provides the capability to define robot task very conveniently. SAITEL was implemented on a direct drive SCARA robot developed in the Samsung Advanced Institute of Technology, and proved to be very useful for the operation of SCARA-type robots. It can be used also for other types of robots by slight modification.

• 한국기계가공학회지
• /
• 제3권2호
• /
• pp.73-78
• /
• 2004

In this paper, the instrument for scientific education in elementary school is developed with the application of basic robot technology for coming IT future world. Particularly, a kind of robot game to fun a race with each other is planed to give a motive or interest in scientific education. This robot game is played with two robots per player, One robot is moved wirelessly with a remote controller and the other robot is moved automatically with intelligence given by computer program made by a player. This game system will be in spotlight as multi-objective educational system not only to teach basic technology of IT, but also to improve the ability for logical and creative thought in elementary school students.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.244-248
• /
• 1996

Nowadays, most shop floors using industrial robots have many problems such as constructing robot workcell, generating robot arm moving trajectory, etc.. In the case of programming robot-arms for a specific task, shop operator commonly use the teach pendant to record the target position and determine the moving trajectory. However, such a teaching process may result in an inefficient trajectory in the sense of moving distance and joint angle fluctuation. Moreover, shop operators who have little knowledge about robot programming process need a lot of learning time and cost. The purpose of this paper is to propose a user friendly robot programming method to program robot-arms easily and efficiently for shop operator so that the programming time is reduced and a short and stable trajectory is obtained.

• 대한인간공학회지
• /
• 제10권1호
• /
• pp.3-10
• /
• 1991

The teach pendant and keyboard have been used as an input device of control command in human-robot sustem. But, many problems occur in case that the usef is a novice. So, speech recognition system is required to communicate between a human and the robot. In this study, Korean voice commands, eitht robot commands, and ten digits based on the broad phonetic analysis are described. Applying broad phonetic analysis, phonemes of voice commands are divided into phoneme groups, such as plosive, fricative, affricative, nasal, and glide sound, having similar features. And then, the feature parameters and their ranges to detect phoneme groups are found by minimax method. Classification rules are consisted of combination of the feature parameters, such as zero corssing rate(ZCR), log engery(LE), up and down(UD), formant frequency, and their ranges. Voice commands were recognized by the classification rules. The recognition rate was over 90 percent in this experiment. Also, this experiment showed that the recognition rate about digits was better than that about robot commands.

• 제어로봇시스템학회논문지
• /
• 제19권10호
• /
• pp.921-927
• /
• 2013

This paper presents a user interface for vision based indirect teaching of a robotic manipulator with Kinect and IMU (Inertial Measurement Unit) sensors. The user interface system is designed to control the manipulator more easily in joint space, Cartesian space and tool frame. We use the skeleton data of the user from Kinect and Wrist-mounted IMU sensors to calculate the user's joint angles and wrist movement for robot control. The interface system proposed in this paper allows the user to teach the manipulator without a pre-programming process. This will improve the teaching time of the robot and eventually enable increased productivity. Simulation and experimental results are presented to verify the performance of the robot control and interface system.

• 제어로봇시스템학회논문지
• /
• 제13권11호
• /
• pp.1137-1145
• /
• 2007

Palletizing tasks are necessary to promote efficient storage and shipping of boxed products. These tasks, however, involve some of the most monotonous and physically demanding labor in the factory. Thus, many types of robot palletizing systems have been developed, although many robot motion commands still depend on the teach pendant. That is, the operator inputs the motion command lines one by one. This is very troublesome and, most importantly, the user must know how to type the code. We propose a new GUI(Graphic User Interface) for the palletizing system that is more convenient. To do this, we used the PLP "Fast Algorithm" and 3-D auto-patterning visualization. The 3-D patterning process includes the following steps. First, an operator can identify the results of the task and edit them. Second, the operator passes the position values of objects to a robot simulator. Using those positions, a palletizing operation can be simulated. We chose a widely used industrial model and analyzed the kinematics and dynamics to create a robot simulator. In this paper we propose a 3-D patterning algorithm, 3-D robot-palletizing simulator, and modified trajectory generation algorithm, an "overlapped method" to reduce the computing load.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.814-819
• /
• 2007

Palletizing task is well-known time consuming and laborious process in factory, hence automation is seriously required. To do this, artificial robot is generally used. These systems however, mostly user teaches the robot point to point and to avoid time-variable obstacle, robot is required to attach the vision camera. These system structures bring about inefficiency and additional cost. In this paper we propose task-oriented trajectory generation algorithm for palletizing. This algorithm based on $A^{*}$ algorithm and slice plane theory, and modify the object dealing method. As a result, we show the elapsed simulation time and compare with old method. This simulation algorithm can be used directly to the off-line palletizing simulator and raise the performance of robot palletizing simulator not using excessive motion area of robot to avoid adjacent components or vision system. Most of all, this algorithm can be used to low-level PC or portable teach pendent