• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.539-542
• /
• 1996

The forces exerted on an object by the end-effectors of multi-manipulators are decomposed into the motion-inducing force and the internal force. Motion-inducing force effects the motion of an object and internal force can't effect it. The motion of an object can't track exactly the desired motion because of internal force component, therefore internal force component must be considered. In this paper using the resolved acceleration control method and the fact that internal force lies in the null space of jacobian matrix, we construct independently the position, motion-inducing force and internal force controller. Secondly we construct the robust controller to preserve the robustness with respect to the uncertainty of manipulator parameters.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.11
• /
• pp.1103-1109
• /
• 2008

Since the flexible joint robots with motor dynamics are represented by the fifth-order nonlinear sγstem, it is difficult and complex to design the controller for electrically driven flexible-joint (EDFJ) robots. In this paper, we propose a simple adaptive control method to solve this problem. It is assumed that the model uncertainties of the robots dynamics, joint flexibility, and motor dynamics are unknown. For the simple control design, the dynamic surface design method is applied, and all uncertainties in the robot and motor dynamics are compensated by using the adaptive function approximation technique. It is proved that all signals in the controlled closed-loop system are uniformly ultimately bounded. Simulation results for three-link EDFJ manipulators are provided to validate the effectiveness of the proposed control system.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.462-466
• /
• 1989

This paper describes the methods of spline low-order polynomial trajectory planning using only a few limited look-ahead knots on the desired trajectory for the real-time computing. Specifically presented are the mixed joint trajectory planning methods which apply linear or LSPB method to initial and finial segments, overlapped cubic spline method to the other segments, where the displacements for initial and finial segments are chosen to be relatively smaller than the displacements for the other, equidistant segments. Experimental and simulation results of these methods show smooth motions and improved path tracking performances compared with any other interpolated joint trajectory planning methods.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.6
• /
• pp.638-648
• /
• 1990

An effective resolved motion control method of redundant manipulators is proposed to minimize the energy consumption and to increase the dexterity while satisfying the physical actuator constraints. The method employs the neural optimization networks, where the computation of Jacobian matrix is not required. Specifically, end effector movement resulting from each joint differential motion is first separated into orthogonal and tangential components with respect to a given desired trajectory. Then the resolved motion is obtained by neural optimization networks in such a way that 1) linear combination of the orthogonal components should be null 2) linear combination of the tangential components should be the differential length of the desired trajectory, 3) differential joint motion limit is not violated, and 4) weighted sum of the square of each differential joint motion is minimized. Here the weighting factors are controlled by a newly defined joint dexterity measure as the ratio of the tangential and orthogonal components.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.103-106
• /
• 2001

A new control method for a redundant manipulator is developed using a local optimal torque and null space joint velocity. By solving the dynamic control equations of the system, the local optimal torque is obtained. If only the local optimal torque is used for controlling the robot there is a possibility that the system is unstable. To eliminate the characteristics of instability during the movements, the control law with a null space concept is used. The new method is applied to the 3-DOF planar manipulator. The simulation results show the effectiveness of the proposed algorithm.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.99-102
• /
• 2001

본 논문에서는 파라미터 불확실성이 유한한 로봇 매니퓰레이터에 대한 비선형 강인 제어기법을 제안한다. 파라미터의 불확실성을 보상하는 강인제어시 발생되는 정강 상태 오차를 개선시키기 위하여 오차 관련 함수에 추종오차의 적분항을 추가시키고 제어입력에 이 적분항이 포함되도록 한다. 설계된 제어시스템의 안정도는 Lyapunov 기법에 의하여 해석한다. 파라미터 불확실성을 가지는 로봇 매니퓰레이터에 대한 컴퓨터 시뮬레이션을 통하여 제안된 기법의 성능을 확인하고 5 링크 2 자 유도의 FARA 로봇에 대한 실험을 통하여 제안된 기법이 실용 로봇제어에 적용될 수 있음을 보이고자 한다.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.197-200
• /
• 2001

본 논문에서는 특정한 형태의 제약 즉, 매니퓰레이터의 자유도와 주어진 제약조건의 차원의 차이가 1이며, 매니퓰레이터의 동역학을 작업영역에서의 축차모델로 나타내었을 때, 변환행렬이 단위행렬로 나타나는 제약을 가지는 불확실한 로봇 매니퓰레이터의 위치/힘 추종을 위한 적응제어기를 제안한다. 제안된 제어기는 비선형 좌표변환을 통하여 얻어진 로봇의 축차모델(reduced-order model)을 이용하여 위치제어와 힘제어의 문제를 분리한다. 특히, 비선형 동적 필터를 이용하여 위치의 측정만을 필요로 하며, 적응제어 기법을 통하여 전역 점근적인 안정성을 보장한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.108.4-108
• /
• 2002

This paper aims to derive a mathematical model of the dynamics of handling tasks in robot fingers which stably grasps and manipulates a rigid object with some dexterity. Firstly, a set of differential equation describing dynamics of the manipulators and object together with geometric constraint of tight area-contacts is formulated by Lagrange's equation. Secondly, problems of controlling both the internal force and the rotation angle of the grasped object under the constraints of tight area-contacts are discussed. The effect of geometric constraints of area-contacts on motion of the overall system is analyzed and a method of computer simulation for differential-algebraic equations of overall...

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.832-837
• /
• 1991

After many years of proliferation, the nuclear industry is indebted for a formidable consequence, the safe management of spent fuel. Naturally, the high radioactivity involved with such process motivates the development of effective telerobotic systems. Nevertheless, the existing master-slave type of tele manipulators are limited in effectiveness by the human operator's limited sensory and manipulation capabilities. This paper presents the result of a research effort to resolve such problems by assigning the slave manipulator a certain degree of intelligence; sensing and actuation. In the presented system, a perception-action loop is achieved using ultrasonic range sensor and laser distance sensor interfaced with the PUMA 760 industrial robot system, and applied to automating impact wrenching task for unbolting the lid of nuclear spent fuel cask. The perception-action loop performs determination of the cask location, collision avoidance and centering of the impact wrench onto the bolt head. To aid the insertion task and to provide versatility a mounting module consisting of an RCC device and an automatic tool changer is designed and implemented. The performance of the developed system is tested on the model cask and the result is given.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.37-40
• /
• 1988

It is well-known that the redundancy can be exploited to avoid the singular regions of the redundant manipulator by increasing the manipulability. The method, however, requires exprecessive energy and gives rather large tracking errors since the manipulability is increased repidly so that the manipulator avoid the singular region quickly. In this paper, a new method is proposed in which the increasing speed of the manipulability is confined to a certain bound. Therefore, in the proposed method, the movement energy and the tracking errors are reduced. The computer simulation studies are performed to show the validity of the method.