• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.1
• /
• pp.136-146
• /
• 2000

Although the urban elevated road is welcomed in modern society to deal with urban traffic problems, its negative influence on both the pedestrian environment and urban landscape has been frequently observed. Furthermore, the space under elevated structures has been ignored, being the lost space. Recently, several efforts have been devoted into bringing back the lostspace. However, any specific design guidelines shown in the street design of Japan and Singapore have not been suggested in Korea, yet. This study proposes a case of the Nengdong-Ro street design where the two-story urban elevated road is being constructed and negative effects of the elevated road are largely expected. One of the purposes of Nengdong-Ro street design proposed in this study is to relieve the negative effect os the two-story elevated road, and to provide a better pedestrian environment in Nengdong-Ro. The other purpose is to suggest general guidelines that can be applied to the similar context as Nengdong-Ro. It is considered that the space under the elevated road generally consist of three sections: 1) main section where the elevated road runs parallel with the ground, 2) landing section where elevated road goes down to the ground, and 3) facility section where facilities such as the platform and the ticketing booth are located. The design guidelines are suggested for each section, because each section has a different situation. Plans, section and elevations and the details of the street furniture are also incorporated to support the design guidelines.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.1
• /
• pp.31-43
• /
• 2023

In this paper, we propose a method for generating a global path for an unmanned vehicle using public data of road section information. First, the method of analyzing road section information of the Ministry of Land, Infrastructure and Transport is presented. Second, we propose a method of preprocessing the acquired road section information and processing it into meaningful data that can be used for global routes. Third, we present a method for generating a global path using the preprocessed road section information. The proposed method has proven its effectiveness through actual autonomous driving experiments of unmanned ground vehicles.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.125-131
• /
• 2011

This research aims to investigate the cause of the occurrence of a weak road drainage section scientifically and specifically through a site survey for a poorly drained section occurring due to rainfalls during road operation. This paper deeply reviewed the existing research results and current situation data on the poorly drained sections accumulated in Korea Expressway Corporation in order to investigate the cause of the occurrence of a weak road drainage section, and deeply verified and analyzed the weak sections for the road surface drainage facilities and the other road drainage facilities by visiting the expressway controlled by the 6 local headquarters and 33 branches of Korea Expressway Corporation. As a result of site surveys for the weak road drainage sections, i) in a road surface section, occurrence of ponding in the road shoulder pavement due to slope changes, bad collection of water in the collecting well at a median strip, shortage of road shoulder dike height, and inferior construction, etc. was analyzed to be the main cause of the occurrence of poorly drained sections, and ii) in a road neighborhood section, the occurrence of pavement height difference in a main road and shoulder section due to inferior ditches on a slope and the bad drain age at the inlet and outlet of a culvert due to soil deposits, debris, etc. were analyzed to be the main cause of the occurrence of weak sections. Proposed as a plan to improve the poorly drainage section of road were i)calculation of capacity through material changes at the ditch, enhancement of vertical sections and hydraulic analysis in terms of construction and other aspects, ii)derivation of a combined slope considering a slope and a vertical linearity and maintenance of proper distance between drainage structures in a vertical concave section in terms of geometrical structure, and iii)calculation of the drainage facility installation interval using a minutely rainfall intensity formula and a non-uniform flow analysis technique in terms of hydraulics and hydrologics and prompt removal of rainfalls from the road surface according to a linear drainage method.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.95-105
• /
• 2013

PURPOSES: The purpose of this study is to research the influence of road traffic noise by road slope through the analysis of the field road traffic noise and determine consideration of road slope in the case of appling active noise cancellation. METHODS: This study measures vehicle's noise by the NCPX method at the three field sections such as uphill, downhill, and flatland. Total sound pressure and sound pressure level by the 1/3 octave band frequency are calculated through the raw field data. Total sound pressure level is compared by ANOVA test and T test statistically. The results obtained are compared in accordance with the road slope and the progress of the uphill section. RESULTS : The noise characteristic of early, medium, and last parts of uphill was found to be consistent when the vehicle was travelling uphill section. The result of statistical test, it was shown that total sound pressures are not different each other. According to the comparison by the geometry, sound pressure of the uphill section was higher than those of the flatland and downhill section in high frequency band. By the result of statistical test, total sound pressure are different according to geometry in the case of high vehicle speed. In the comparison result by road slope, each sound pressure level was found to be consistent in total frequency. However, total sound pressure proportionally increased according to road slope. CONCLUSIONS: It is found that the effect of road slope on noise generation was little in this experimental sites.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1507-1516
• /
• 2020

This study analyzed the scenario for road freezing section by applying the road freezing evaluation algorithm. To apply road freezing algorithm, the influencing factors on road freezing were reviewed. Observation data from four points, Mokgam IC, Jeongneung tunnel, Seongsan bridge, and Yeomchang bridge were used for analysis. All observatories are installed on the expressway, and they are classified for the analysis of road freezing characteristics. When the difference between the road surface temperature and dew-point temperature of the road freezing evaluation algorithm was 3℃ or less, the section where road freezing occurred was checked. In addition, road freezing evaluation was derived through the change of the road surface condition and water film thickness of the freezing section.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.4
• /
• pp.23-29
• /
• 2008

This research proposes two sub-models and one integrated model for the classification of safety in curve section of road, where the fatal-rate is relatively higher in accidents. The first sub-model calculates the accident-rate by safety-index that is based on the road geometries. The second decides the safety of curve section by the speed difference between before and in the curve. Finally, the integrated model of two sub-modules can classify the safety of curve section of road.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.71-78
• /
• 2010

The road safety depend on many road factors like vertical alignment, horizontal alignment and road cross section angle. These data are hardly to get with drawings, and the real data are differ from drawings because of road pavement overlay, etc. To get these data, so many time and cost are needed, moreover it is dangerous work in heavy traffic road. In this study we obtained the road safety data with RoSSAV(Road Safety Survey & Analysis Vehicle) of Korea Institute of Construction Technology in accordance with traffic flow, and make analysis of road safety with the vertical alignment, horizontal alignment and road cross section angle data. We derived the safety improvement method in Young-dong accident prone spot and described detail method in this paper.

• Journal of the Korean Society of Safety
• /
• v.32 no.6
• /
• pp.143-149
• /
• 2017

According to traffic accidents statistics, the number of fatalities, injuries and the rate of increase of traffic accidents have been decreasing over last 5-years. The fatality rate is 1.9 for total accidents but the fatality rate for single vehicle accidents shows a 7.9, which is 4 times greater than the average for all accidents. Single vehicle accidents, usually occur as a vehicle impacts a fixed objects on the roadside as the vehicle runs-off from the road. However, few researches have been conducted considering the accident severity of single vehicle accidents which impact to the fixed objects on the road. The single vehicle accident is directly related to the composition of road cross section, (since it is the required the minimum width of a road for all run-off-the-road vehicles to recover or come to a safe stop). Therefore, this study analyzes the influence of road cross section on traffic accidents to find out the severity of single vehicle accident. To analyze the road elements which are related to the accident severity, the Ordered Probit Model was used. As variables, the element of road cross section such as the radius(m), vertical curve(%), cross sectional grade(%), road width(m). number of climbing lane, median, and curb, were used (as was the 3-years of accidents data). This study found out that cross slope(%), road width(m), and the number of climbing lane are related to the severity of accident. The result of this study could be expected to improve the road safety and to be used as the base data for further road safety research.

• International Journal of Highway Engineering
• /
• v.17 no.1
• /
• pp.105-118
• /
• 2015

PURPOSES : This study aims to evaluate the road safety of the super-elevation transition section of a left turn curve and suggest the minimum longitudinal grade of a super-elevation transition section to be used before and after a left curved section. METHODS : We evaluated the road condition by means of the safety-criterion-evaluation method involving side friction factors, and then solve the problem by introducing the minimum longitudinal grade criterion based on conditions described in the hydraulics literature. RESULTS : It was calculated that when a road satisfies hydroplaning conditions, the difference between side friction assumed and side friction demanded is less than -0.04. In this case, the safety criterion for the condition is unsatisfied. Conversely, when a road is in a normal state under either wet or dry conditions, it was calculated that the difference between side friction assumed and side friction demanded is more than 0.01. Thus, the safety criterion for this condition is found to be satisfied. After adjusting the minimum longitudinal grade applied to a super-elevation transition section, the hydroplaning condition can be eliminated and the safety criterion can be met for all sections. CONCLUSIONS : It is suggested that a minimum longitudinal grade should be provided on super-elevation transition sections in order to prevent hydroplaning.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1327-1328
• /
• 2006

Lanthanum oxide was introduced to molybdenum powder by liquid-liquid doping and liquid-solid doping respectively. Mo alloys were prepared by powder metallurgy technology. The size distribution and feature of dopant particles and the fractographs of Mo alloys were investigated by TEM and SEM respectively. The results indicated that liquid-liquid doping method is favorable for refining and dispersing $La_2O_3$ particles uniformly in matrix. Fracture toughness of Mo alloys prepared by liquid-liquid doping showed better results than that of liquid-solid doping. Furthermore, the influences of the size distribution of $La_2O_3$ on properties of Mo alloys was discussed by dislocation pile-up theory.