• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.2
• /
• pp.34-43
• /
• 2007

To investigate the restoration procedure on soil physical properties and vegetation at the surface of strip road affected by timber harvesting operation. This study was carried out at strip roads constructed between 1989 and 1994 in Mt. Baekun, Kwangyang, Chollanam-Do. Soil hardness of the surface layer was improved with change of time after strip road construction, but that of 7.6~15 cm depth from the surface was not improved. According to linear regression analysis, it was estimated 16.6 years in 0~7.5 cm and 16.9 years in 7.6~15 cm soil depth to be restored to natural forest lands. The amount of surface soil erosion was 0.045$m^3$/km/yr on strip roads constructed in 1989 and 1990, and road constructed in 1994 showed the highest value (4.5$m^3$/km/yr). Vegetation coverage rates of road surface were 96.7% in strip roads constructed in 1990. Those of cutslope and fillslope were highest in roads constructed in 1990. The results indicated that strip roads were restored with change of time after road construction.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.184-189
• /
• 2008

In this study, an artificial wheel load generation method is proposed to assist practical engineers performing dynamic analysis with simple procedure. To generate an artificial wheel loads from running vehicle, PSD(Power Spectrum Density) profiles of actual wheel load were sampled in terms of various road roughnesses. A detailed truck and bridge models were used for sampling actual wheel load to represent the real motion of moving vehicle. These wheel load profiles were simplified for the artificial wheel load. The simplification of actual wheel load profiles was performed by regression analysis. The result showed that the artificial wheel load well represents the real profiles of wheel load.

• Journal of the Korean housing association
• /
• v.12 no.2
• /
• pp.133-142
• /
• 2001

The development of idyllic housings, is in increasing growth in the suburban areas of Seoul, presents some critical problems such as in sufficient common open space and poor living condition, which are mainly caused by disorderly designed. Through comparing planning indices of idyllic housing, this paper aims to diagnose the condition and causes of those problems and to present some basic issues on improvement direction. The causes of problems can be summarized as the blind point in regulation system, the shortness of planning elements of a housing block which includes road systems and public facilities, and the mismatch of housing type with density, on which includes road systems and public facilities, and the mismatch of housing type with density, on which hereafter improvement suggestion should be focused. And this study suggest the simulation models on an ideal idyllic housing to be applied in our forthcoming idyllic housing of Korea, which can indeed become a generalized alternative to the livable idyllic housing.

• International Journal of Automotive Technology
• /
• v.3 no.3
• /
• pp.101-109
• /
• 2002

A time domain method for solving nonstationary random vibration caused by vehicle acceleration is first proposed in which a time changing model is established for representing nonstationary excitation of a rough road. Furthermore a novel frequency domain method called the transient power spectral density with spatial frequency (TPSD) is presented to obtain a response of vehicle system in frequency domain. This method has been proved to be valid by comparing numerical results with the exact solution.

• The Korean Journal of Applied Statistics
• /
• v.23 no.6
• /
• pp.1179-1190
• /
• 2010

Management of the existing traffic network and understanding current traffic conditions is the most important and effective way to solve traffic congestion. This research investigates the status of Korea expressway through the Speed-Flow-Density diagram and finds the best suitable queueing model for each area. Dynamic structure in the queueing model enables us to reflect the structural change of the road in case of traffic congestion. To find the best model and estimate the parameters, we use the Newton-Raphson method. Finally, we examine the road efficiency in view of the optimal speed and density using the conditional distribution of speed and density of a S-F-D diagram.

• Journal of Veterinary Clinics
• /
• v.31 no.4
• /
• pp.282-287
• /
• 2014

The negative impacts of roads on wildlife mortality have been well documented, and one of the most significant impact is wildlife-vehicle collisions (WVCs) in most countries throughout the world. While road impacts on wildlife are a truly global concern with a large socio-economic cost, few researches in Korea have been quantified road-kill occurrence on highways or identified extensively seasonal and geographic patterns of this phenomenon. Therefore, we analyzed highway mortality of wild mammals in Korea using database from five years of nation-wide data on WVCs, and estimated road-kill density by standardizing on per km and per $10^3$ vehicle basis. During 2008 through 2012, a total of 10,940 wildlifes were reported killed on highways, with an average of 2,188 cases per year. There were 2,376 road-kills in 2012, and this equates to 0.01 road-kills per km per week or one road-kill every 88.5 km per week. For time of day, road-kills occurred more frequently in the early morning (05:00-08:00, 38.3%), and day of week did not have a significant influence in any individual year. The road-kill was highest in the spring (March- May, 33.0%) and least in the winter (December-February, 16.1%), and the most frequently killed native species were of Korean water deer (79.7%), raccoon dog (12.7%), Korean hare (3.1%), and leopard cat (1.2%). The overall standardized kill-rate (number/10 km/1,000 vehicles/month) in 2012 was 0.057 with highest on Dangjinyeongdeok highway (0.476), followed by Yeongdong (0.274), Sooncheonwanju (0.233), Iksanpohang (0.187), and Joongang (0.150). This study highlights that the frequency of WVCs are prevalent throughout the highways in Korea. Further work is needed to determine whether such a level of mortality is sustainable from an ecological point of view.

• Journal of Environmental Impact Assessment
• /
• v.11 no.3
• /
• pp.117-127
• /
• 2002

This study tested the usefulness of landscape indices for quantifying forest fragmentation due to linear development projects. Research was carried out in the middle-upper Nakdong River watershed, which has been affected by the expressway building, or national road-widening. Landscape indices were calculated from the forest cover maps before and after road-building using FRAGSTATS 3.1. We could successfully demonstrate the forest fragmentation based on landscape indices; (1) patch size decreased, and edge density and patch density increased (2) roads simplified patch shapes, especially in the larger patches, (3) patch core area size decreased, and core area density increased, (4) the distance increased between the focal patch and each of the other patches within the search radius (=1km) as a result of roads. We suggest several important needs for future researches, including continued investigation of scaling issues, development of indices that measure specific components of spatial pattern, and study of the relationships between forest fragmentation and ecological processes.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.11
• /
• pp.1035-1043
• /
• 2004

For a long road tunnel, a tunnel ventilation system may be used in order to reduce the pollution level below the required level. To control the tunnel pollution level, a closed loop control algorithm may be used. The feedforward prediction algorithm and the cascade control algorithm were developed to regulate the CO level in a tunnel. The feedforward prediction algorithm composed of the traffic estimation algorithm and the CO density prediction algorithm, and the cascade control algorithm composed of the jet fan control algorithm and the air velocity setpoint algorithm. The verification of control algorithms was carried out by dynamic models developed from the actual tunnel data. The simulation results showed that control algorithms developed for this study were effective for the control of the tunnel ventilation system.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.94-106
• /
• 2022

In order to increase timber self-sufficiency, Korea's 6th Basic Forest Plan aims to increase the density of forest roads to 12.8 m ha^-1 by 2037. However, due to rapid re-forestation, current management infrastructure is insufficient, with just 4.8 m ha^-1 of forest roads in 2017. This is partly due to time and cost limitations on the process of forest road feasibility evaluation, which considers factors such as topography and forest conditions. To solve this problem, we propose an eco-friendly and efficient forest road network planning method using a geographic information system (GIS), which can evaluate a potential road site remotely based on spatial information. To facilitate such planning, this study identifies forest road construction priorities that can be evaluated using spatial information, such as topography, forest type and forest disasters. A method of predicting the optimal route to connect a forest road with existing roads is also derived. Overlapping analysis was performed using GIS-MCE (which combines GIS with multi-criteria evaluation), targeting the areas of Cheongsong-gun and Buk-gu, Pohang-si, which have a low forest-road density. Each factor affecting the suitability of a proposed new forest road site was assigned a cost, creating a cost surface that facilitates prioritization for each forest type. The forest path's optimal route was then derived using least-cost path analysis. The results of this process were 30 forestry site recommendations in Cheongsong-gun and one in Buk-gu, Pohang-si; this would increase forest road density for the managed forest sites in Cheongsong-gun from 1.58 m ha^-1 to 2.55 m ha^-1. This evaluation method can contribute to the policy of increasing timber self-sufficiency by providing clear guidelines for selecting forest road construction sites and predicting optimal connections to the existing road network.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.131-144
• /
• 1997

Traffic jam densified day by day is phenomenon to occur lack of the road capacity in comparison with traffic density, but lack of the road cannot be concluded by main cause of traffic ism. Because the central function of a city would be concentrated upon the downtown and traffic demand would not be evenly distributed by the classification of an hour. Therefore, this study based on the fact that each driver will select the route generating traffic delay very low when path choice from origin to destination in travel plan estimating the quality of passage could be maintained the speed he want will approach to a characteristic grasp of a road, traffic, driver changing every moment by traffic-demand of road increased as a geometrical series with analysis a classification of a street, a intersection along the path on traffic density and highway capacity analysis the path using GIS techniques about complex street network, also will get the path of actual optimum for traffic delay trend creating under various condition the classification per a hour, a day of week and an incident through network such as analysis for traffic generation zone adjacent about street, intersection, afterward will expect the result increasing efficiency of the road-use through a good distribution of traffic by optimum-path choice, accordingly will prepare the scientific, objective, appropriate basis to decide the reasonable time of a road-widen and expansion through section analysis along a rate of traffic volume vs. road capacity.