• 한국지반신소재학회논문집
• /
• 제17권1호
• /
• pp.45-54
• /
• 2018

본 연구에서는 최근 도심지에서 발생하고 있는 지반함몰에 대하여 도로의 붕괴 가능성을 높이는 지하공동 영향인자에 대한 수치해석적 분석을 수행하였다. 지하공동으로 인한 지반함몰 영향 인자는 서울시에서 제안한 공동관리 등급제를 참고하여 아스팔트 포장층의 두께, 토피고, 공동 폭을 고려하였고, 본 연구에서 추가로 공동의 높이를 선정하였다. 이들 영향 인자들을 다양한 범위 내에서 변화시킨 조건에서 지하공동이 있는 아스팔트 포장층 상단에 집중하중과 등분포하중을 각각 변위제어하여 도로 파괴하중을 분석하였다. 분석된 파괴하중을 토대로 서울형 공동관리 등급제에 대한 적용성을 평가하였다. 해석 결과 공동의 높이가 파괴에 미치는 영향은 크지 않았으며 이외의 다른 인자에 따라 복합적으로 파괴하중이 결정되었다. 또한 파괴하중을 기준으로 한 공동분류 방법은 공동 조건을 기준으로 한 분류 방법보다 더 세밀한 분류가 가능하며 파괴 시 물리적인 현상을 반영할 수 있어 더 합리적인 방법이다.

• 지질공학
• /
• 제17권1호
• /
• pp.115-123
• /
• 2007

최근 들어 인구증가와 경제발전에 따른 고속도로의 확장 또는 신설이 급증하고 있고 양호한 노선을 위해 터널 건설도 급속도로 증가하고 있다. 이와 더불어 터널 시공 중 붕괴가 발생할 수 있는 경우도 상대적으로 높아지고 있다. 특히, 도로의 양호한 선형 확보를 위하여 지반조건이 불량한 구간에서 터널 굴착이 증가하므로 적절한 보강공법의 적용 없이 굴착을 실시하는 경우에 붕락이 자주 발생하였다. 본 논문에서는 고속도로 터널 시공 중 보편적인 붕괴 사례를 조사함으로써 다른 지질조건에서의 붕괴원인과 형태 및 적용 보강공법에 대해 분석하고자 한다.

• 한국터널지하공간학회 논문집
• /
• 제19권3호
• /
• pp.489-501
• /
• 2017

도심지 개착식 굴착공사 중 발생하는 붕괴사고는 공사장 내에서의 인명 및 물질적 피해를 불러일으킬 뿐만 아니라, 공사장 주변의 지반침하로 인한 도로함몰 및 시설물 피해를 유발한다. 따라서, 도심지에서 개착식 굴착공사를 수행함에 있어서, 계획, 설계 및 시공의 건설 전체 단계에서 굴착공사 붕괴 방지를 위한 철저한 대비가 필요하다. 본 연구에서는 이와 같은 개착식 굴착공사 중 붕괴사고 예방을 위해, 중점적으로 관리되어야 할 우선 요소 결정 연구를 수행하였다. 먼저, 과거 흙막이 굴착공사의 사고사례 조사결과를 분석하고, 전문가 합의에 의한 의사결정 방법인 델파이 기법을 이용하여 붕괴 유발 요소에 대한 중요도를 산정하였다. 그 결과, 지하수 처리, 지반조사의 부실, 시공상의 불안정 등이 흙막이 공사 붕괴 예방을 위한 중점 관리 요소로 도출되었다.

• Geomechanics and Engineering
• /
• 제35권5호
• /
• pp.511-523
• /
• 2023

Canal-side roads frequently collapse due to an unexpectedly greater soft-clay thickness with a rapid drawdown situation. This causes annually increased repair and reconstruction costs. This paper aims to explore the effect of soft-clay thickness on the failure in the canal-side road in the case study of Phra Nakhon Si Ayutthaya rural road no. 1043 (AY. 1043). Before the actual construction, a field vane shear test was performed to determine the undrained shear strength and identify the thickness of the soft clay at the AY. 1043 area. After establishing the usability of AY. 1043, the resistivity survey method was used to evaluate the thickness of the soft clay layer at the failure zone. The screw driving sounding test was used to evaluate the undrained shear strength for the road structure with a medium-stiff clay layer at the failure zone for applying to the numerical model. This model was simulated to confirm the effect of soft-clay thickness on the failure of the canal-side road. The monitoring and testing results showed the tendency of rapid drawdown failure when the canal-side road was located on > 9 m thick of soft clay with a sensitivity > 4.5. The result indicates that the combination of resistivity survey and field vane shear test can be successfully used to inspect the soft-clay thickness and sensitivity before construction. The preliminary design for preventing failure or improving the stability of the canal-side road should be considered before construction under the critical thickness and sensitivity values of the soft clay.

• Structural Engineering and Mechanics
• /
• 제52권6호
• /
• pp.1085-1098
• /
• 2014

Plastic mechanism analysis of structures subjected to large deformation has long been used in order to determine collapse mechanisms of steel structures, and the energy absorbed in plastic deformation during such collapses. In this paper the technique is applied to vehicle roof structures that undergo large plastic deformation as a result of rollover crashes. The components of such roof structures are typically steel spot-welded hat-type sections. Ten different deformation mechanisms are defined from investigations of real-world rollover crashes, and an analytical technique to determine the plastic collapse load and energy absorption of such mechanisms is determined. The procedure is presented in a generic manner, such that it may be applied to any vehicle structure undergoing a rollover induced collapse. The procedure is applied to an exemplar vehicle, in order to demonstrate its application in determining the energy absorbed in the deformation of the identified collapse mechanisms. The procedure will be useful to forensic crash reconstructionists, in order to accurately determine the initial travel velocity of a vehicle that has undergone a rollover and for which the post-crash vehicle deformation is known. It may also be used to perform analytical studies of the collapse resistance of vehicle roof structures for optimisation purposes, which is also demonstrated with an analysis of the effect of varying the geometric and material properties of the roof structure components of the exemplar vehicle.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.140-153
• /
• 2005

During the tunnel construction the major failure mode can be categorized as: tunnel failure just after the tunnel excavation without support, failure after application of shotcrete and finally failure after setting the concrete lining. The failure mode just after the tunnel excavation without support, can be further classified as : bench failure, crown failure, face failure, full face failure, failure due to weak strata and failure due to overburden. Moreover the failure after application of shotcrete is classified as heading face failure, settlement of shotcrete support, local failure of shotcrete lining and invert shotcrete. To find out the major causes of tunnel collapse, the investigation was done in case of the second phase of Seoul subway construction. The investigation results depicted that the major causes of tunnel collapse were due to the weak layer of rock/fault and sudden influx of ground water from the tunnel crown. While the investigation results of the mountain road tunnels construction have shown that the major causes of tunnel failure were inadequate analysis of tunnel face mapping results, intersection of faults and limestone cavities. In this paper some recent measurement in order to mitigate such tunnel collapse are presented

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 연약지반처리위원회 학술세미나
• /
• pp.14-22
• /
• 1999

Daylight collapse have been occurred by about 6.$^{0}$ m deep at ground surface which connected to the ground surface and excessive overbreak have been occurred by the space and height of 3.$^1$~6.$^2$m at crown head part of the tunnel during tunnelling of lower-half part after completing upper-half part on tunnelling of a phyllite mountain by NATM method at the construction work of two way-double track national road. This study is a successful illustration case of earth improvement by confirming structural safety of the tunnel in a whole through solving the cause of the tunnel collapse and the work have completed successfully through applying such earth strengthening method as cement mortarㆍcement milk injection, S.G.R, steel pipe reinforced multi-step grouting etc.

• Geomechanics and Engineering
• /
• 제17권1호
• /
• pp.97-107
• /
• 2019

Based on the results of Han et al. (2016), in the failure zone ahead of the tunnel face it can be obviously identified that a shear failure band occurs in the lower part and a pressure arch happens at the upper part, which was often neglected in analyzing the face stability of shield tunnel. In order to better describe the collapse failure feature of the tunnel face, a new improved failure mechanism is proposed to evaluate the face stability of shield tunnel excavated in layered soils in the framework of limit analysis by using spatial discretization technique and linear interpolation method in this study. The developed failure mechanism is composed of two parts: i) the rotational failure mechanism denoting the shear failure band and ii) a uniformly distributed force denoting the pressure arch effect. Followed by the comparison between the results of critical face pressures provided by the developed model and those by the existing works, which indicates that the new developed failure mechanism provides comparatively reasonable results.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1398-1408
• /
• 2010

Recently, accelerating population and advanced economy result in extending old freeways and constructing new freeways. To make a good freeway shape, tunnel constructions are also rapidly increasing. Therefore, a possibility of a collapse during a tunnel excavation is getting higher in a proportionate manner. This research paper will analyze forms and causes of the collapses for different geological conditions and applied reinforcement solutions by investigating typical collapse sites during highway tunnel constructions.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.825-830
• /
• 2005

Cut slope and facility of management investigation is the protection of humans and properties. it is very important the prevention of disaster facility and the damage of the slope protection facility. It is very difficult to forecast slope stability, disaster possibility and collapse. It will be able to minimize the damage which it prepare against slope facility and cut slope of deformable investigation and collapse and the disaster. therefore those deformable investigation is important. Investigations execute upheaval, crack, sliding for slope and cut slope reinforcement. Investigation executes forecast in place where the construction problem, the effect which the damage in road traffic or the contiguity facility.