• Korean Journal of Construction Engineering and Management
• /
• v.10 no.1
• /
• pp.91-101
• /
• 2009

The factors of uncertainty such as work delay could cause many problems, for example, increase of construction cost and terms of work, and the deterioration of quality. Because of these, the uncertainty risk is regarded as an important management factor to obtain the success of construction project. So, the systematic management plan about the uncertainty factors is needed because it plays an important role in the completion of entire project. And also analysis of some factors which can cause the work delay can be one way of improving construction project's certainty and making it competitive. In this reason, we have to make an effort to set a priority based on analysis of quantitatively numerical value about work delay factors to manage them effectively. Thus, this study aims to suggest the basic data for the effective management and prevention of work delay in steel-frame work which is progressive actively now, along with increasing of demand of high-rise buildings by analyzing each reasons of work delay factors and also by suggesting important management factors that are coded according to each construction work using FMEA method which could give a data about the importance of work delay factors through quantitatively numerical value.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.7
• /
• pp.177-180
• /
• 2019

A typical vulnerability scoring system is Common Vulnerability Scoring System(CVSS). However, since CVSS does not differentiate among the individual vulnerability impact of the asset and give higher priority for the more important assets, it is impossible to respond effectively and quickly to high-risk vulnerabilities on large systems. We propose a Layered weight based Vulnerability impact assessment Scoring System which can hierarchically group the importance of assets and weight the number of layers and the number of assets to effectively manage the impact of vulnerabilities on a per asset basis.

• Progress in Medical Physics
• /
• v.26 no.2
• /
• pp.112-117
• /
• 2015

In order to establish the quality control on patient safety following the guideline presented by American Association of Physicists in Medicine (AAPM) TG-100 committee, we aim to analyze the modes based on errors occurred during treatment of patients at the radiation oncology department at Yeungnam University Hospital and establish a quality control guideline for patient safety when patient-centered radiation treatment is conducted. We aim to analyze the errors that can occur during radiation treatment at the radiation department, and assess the frequency of error, the severity of error affecting patients, and probability of proceeding without noticing error, with scores. The places where errors can take place were divided into CT simulation treatment room, treatment planning room, and treatment room for the analysis. In CT simulation treatment room, an error from using the immobilization device showed the highest Risk Priority Number (RPN) value of 60, and an error from simulation treatment information input showed the lowest of 6. In treatment planning room, an error from selecting the radiation dose calculation model showed the highest RPN value of 168, and an error of patient treatment start date showed the lowest of 36. In treatment room, a Table Bar error showed the highest RPN value of 252, a weight change error showed 190, and a Pillow error showed the lowest of 24.

• Journal of the Korean Society of Radiology
• /
• v.11 no.7
• /
• pp.627-635
• /
• 2017

Brachytherapy is generally performed in conjunction with external radiation therapy, and the treatment course is very complicated, which can lead to radiation accidents. In order to solve this problem, we designed the process map by applying the failure mode and effects analysis (FMEA) method to the Brachytherapy and scored the risk priority number (RPN) for each treatment course based on this process map. The process map consisted of five steps, Patient consulting", "Brachytherapy simulation", "CT simulation", "Brachytherapy treatment planning" and "Treatment". In order to calculate the RPN, doctor, medical physicist, dose planners, therapist, and nurse participated in the study and evaluated occurrence, severity, and lack of detectability at each detail step. Overall, the process map is preceded by a patient identification procedure at each treatment stage, which can be mistaken for another patient, and a different treatment plan may be established to cause a radiation accident. As a result of evaluating the RPN for the detailed steps based on the process map, overall "Patient consulting" and "Brachytherapy treatment planning" step were evaluated as high risk. The nurses showed a tendency to be different from each other, and the nurses had a risk of 55 points or more for all the procedures except "Treatment", and the "Brachytherapy simulation" step was the highest with 88.8 points. Since the treatment stage differs somewhat for each medical institution performing radiotherapy, it is thought that the risk management should be performed intensively by preparing the process map for each institution and calculating the risk RPN.

• Toxicological Research
• /
• v.18 no.1
• /
• pp.23-29
• /
• 2002

Disodium disulphite, the HPV chemical, was assigned to Korea in order to implement OECD SIDS program in 1999. It was produced about 3,200 ton/year in 1998. This report evaluates the toxic potency of disodium disulphite based on the environmental and mammalian effects as well as human exposure. Oral $LD_{50}$ in rats is 1,540 mg/kg b.w. and effects was observed to the stomach, liver and the GI track that was filled with blood. For repeated dose toxicity, the predominant effect was the induction of stomach lesion due to local irritation. The no observed adverse effect lever for local (stomach irritation) was about 217 mg/kg bw/day. There is no evidence that disodium disulphite is genotoxic in vivo. No reproductive or developmental toxicty of disodium disulphite was observed for the period up to 2 yr and over three generation. In humans, urticaria and asthma with itching, edema, rhinitis, and nasal congestion were reported. Disodium disulphite is unlikely to induce respiratory sensitization but may enhance symptom of asthma in sensitive individuals. This chemical would be mainly transported to water compartment when released to environmental compartments since it is highly water soluble (470 g/l at 20). Low K oc (2.447) indicates disodium disulphite is so mobile in soil that it may not stay in the terrestrial compartment. The chemical has been tested in a limited number of aquatic species. hem acute toxicity test to fish, 96 hr-$LC_{50}$ was > 100 mg/1. For algae, 72 hr-$XC_{50}$ was 48.1 mg/1. For daphnid, the acute toxicity value of 48 hr-$EC_{50}$ was 88.76 mg/1, and chronic value of 21day-NOEC was > 10 mg/1. Therefore, PNEC of 0.1 mg/l for the aquatic organism was obtained from the chronic value of daphnid using the assessment factor of 100. Based on these data the disodium disulphite was recommended as low priority for further post-SIDS work in OECD.

• Toxicological Research
• /
• v.18 no.1
• /
• pp.13-22
• /
• 2002

In Korea, 2,320 tonnes of acetanilide were mostly wed as intermediates for synthesis in phar-maceuticals or additives in synthesizing hydrogen peroxide, varnishes, polymers and rubber. Only small amount of 120 kg were wed as a stabilizer for hydrogen peroxide solution for hair colouring agents in 1998. Readily available environmental or human exposure data do not exist in Korea at the present time. However, potential human exposures from drinking water, food, ambient water and in work places are expected to be negligible because this chemical is produced in the closed system in only one company in Korea and the processing factory is equipped with local ventilation and air filtering system. Acetanilide could be distributed mainly to water based on EQC model. This substance is readily biodegradable and its bioaccumulation is low. Acute toxicity of acetanilide is low since the L $D_{50}$ of oral exposure in rats is 1,959 mg/kg bw. The chemical is not irritating to skin, but slightly irritating to the eyes of rabbits. horn repeated dose toxicity, the adverse effects in rats were red pulp hyperplasia of spleen, bone marrow hyperplasia of femur and decreased hemoglobin, hematocrit and mean corpuscular hemoglobin concentration. The LOAEL for repeated dose toxicity in rats was 22 mg/kg/day for both sexes. Acetanilide is not considered to be genotoxic. In a reproductive/developmental toxicity study, no treatment-related changes in precoital time and rate of copulation, impregnation, pregnancy were shown in all treated groups. The NOAELs for reproduction and developmental toxicity (off-spring toxicity) are considered to be 200 mg/kg bw/day and 67 mg/kg bw/day, respectively. Ecotoxicity data has been generated in a limited number of aquatic species of algae (72 hr- $E_{b}$ $C_{50}$; 13.5 mg/l), daphnid (48hr-E $C_{50}$ > 100 mg/l) and fish (Oryzias latipes, 96hr-L $C_{50}$; 100 mg/l). Form the acute toxicity values, the predicted no effect concentration (PNEC) of 0.135 mg/1 was derived win an assessment factor of 100. On the basis of these data, acetanilide was suggested as currently of low priority for further post-SIDS work in OECD.in OECD.D.

• 전자공학회논문지 IE
• /
• v.48 no.4
• /
• pp.69-77
• /
• 2011

Recently, the public sector information projects have bebn larger in size, sophisticated, and diversified, which make the performance management model be studied continuously. According to the research and understanding on this, there are discontents resulted from poor requirements managements, schedule delays, budget overruns, failure to achieve expected goals, although there are increase the scale of projects and the number of information systems than ever before. it makes the requirement for the plan to manage significant risk factors systematically. So in this study, we will understand the risks which have been recognized by professionals and managers in public sector projects for enhancing the success rate. And the surveys will be conducted for the risk factors in each fields by gathering the opinions of the hands on workers in public sector project support team such as S company, L company. Finally, the correlation index between the risks and the other project fields would be clear by this survey.

• Journal of Energy Engineering
• /
• v.28 no.3
• /
• pp.10-17
• /
• 2019

According to South Korea's policy of supplying eco-friendly hydrogen vehicles, related industries are actively conducting research on the development of hydrogen cars and hydrogen charging station infrastructure. On the other hand, there is a lack of empirical research and assessment of the risk of non-metallic materials (such as liners, seals, gaskets) for classified materials that directly affect the durability and reliability of hydrogen vehicles and hydrogen charging stations. In this study, the risk factors for liners and seals of non-metallic parts used in high-pressure hydrogen installations were derived using FMEA, and the RPN values were calculated by converting the severity, frequency of occurrence and degree of detection into scores. The maximum value of the RPN 600, minimum value 63, average value 278.5 was calculated and periodic control of the liner and seal was identified as important. In addition, through hydrogen soakage and oxygen aging tests for non-metallic rubber products, physical test values that can be used as basic data were presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.751-758
• /
• 2021

Munitions must be analyzed to identify any risks for quality assurance in development and mass production. Risk identification for parts, compositions, and systems is carried out through failure mode effects analysis (FMEA) as one of the most reliable methods. FMEA is a design tool for the failure mode of risk identification and relies on the RPN (risk priority number). FMEA has disadvantages because its severity, occurrence, and detectability are rated at the same level. Fuzzy FMEA applies fuzzy logic to compensate for the shortcomings of FMEA. The fuzzy logic of Fuzzy FMEA is to express uncertainties about the phenomenon and provides quantitative values. In this paper, Fuzzy FMEA is applied to the failure mode of a rotorcraft landing system. The Fuzzy rule and membership functions were conducted in the Fuzzy model to study the RPN in the failure mode of a landing system. This method was selected to demonstrate crisp values of severity, occurrence, and detectability. In addition, the RPN was obtained. The results of Fuzzy FMEA for the landing system were analyzed for the RPN and ranking by fuzzy logic. Finally, Fuzzy FMEA confirmed that it could use the data in quality assurance activities for rotorcraft.

• Journal of Environmental Health Sciences
• /
• v.45 no.5
• /
• pp.487-496
• /
• 2019

Objective: The purpose of this study was to create soil contamination maps using QGIS (Quantum Geographic Information System) and suggest selection methods for soil pollution sources for preferential investigation in a soil contamination survey. Method: Data from soil contamination surveys over five years in Gyeonggi-do Province, South Korea (2013-2017) were used for making soil contamination maps and analyzing the density of survey points. By analyzing points exceeding the concern level of soil contamination, soil pollutant sources for priority management were identified and selection methods for preferred survey points were suggested through a study of the model area. Results: A soil contamination survey was conducted at 1,478 points over five years, with the largest number of surveys conducted in industrial complex and factory areas. Soil contamination maps for copper, zinc, nickel, lead, arsenic, fluoride, and total petroleum hydrocarbons were made, and most of the survey points were found to be below concern level 1 for soil contamination. The density of the survey points is similar to that of densely populated areas and factory areas. The analysis results of points exceeding the criteria showed that soil pollutant sources for priority management were areas where ore and scrap metals were used and stored, traffic-related facilities areas, industrial complex and factory areas, and areas associated with waste and recycling. According to the study of the model area, the preferred survey points were traffic-related facilities with 15 years or more since their construction and factories with a score of 10 or more for soil contamination risk. Conclusion: Soil contamination surveys should use GIS for even regional distribution of survey points and for the effective selection of preferred survey points. This study may be used as guidelines to select points for a soil contamination survey.