• 한국산학기술학회논문지
• /
• 제13권1호
• /
• pp.322-328
• /
• 2012

본 논문은 무연 솔더를 제거하기 위한 디지털 디솔더링 시스템에 관하여 다룬다. 땜납의 모재가 유연납에서 무연납으로 변화된 작업환경에 대처하고, 설정온도에 빠르게 수렴하며 연속작업이 가능한 디솔더링 시스템을 제안한다. 제안 시스템은 디솔더링 스테이션과 디솔더링건으로 구성되며, PID 온도제어를 위한 주변회로는 8bit MCU를 중심으로 설계하였다. 제안 시스템의 성능을 확인하기 위하여 동종의 수입품과 성능을 비교한 결과, 제안시스템은 기존 시스템에 비해 작업온도 도달시간은 11초 빠르며, 리플온도의 변화량은 $1.5^{\circ}C$ 적고, 열 회복율은 약 $0.14^{\circ}C$/초 빠르게 나타남을 확인 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2210-2212
• /
• 1997

A sensorless input current controller for three phase PWM converter is proposed. A merit of this controller is that sinusoidal input line current, unity power factor, and ripple-free DC voltage can be achieved with low-cost. The paper describes the proposed control strategy and its implementation. Simulation result for the proposed controller is compared with that of the sensor based version.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1086-1098
• /
• 2018

This study presents a new sensorless commutation method for brushless direct current motors to replace Hall sensor signals with virtual Hall signals. The importance of the proposed method lies in the simultaneous elimination of the phase shifter and the low-pass filters, which makes the method simple and cost-effective. The method removes high ripple switching noises from motor terminals, thereby decreasing motor losses. The proposed method utilizes unfiltered line voltages with notches caused by current commutation. Hence, specific sign signals are defined to compensate for the effects of commutation noise. The proposed method is free from phase delay that originates from low-pass filters. The method directly produces virtual Hall signals, and thus, it can be interfaced with low-cost commercial commutation integrated circuits based on Hall sensors. Simulation and experimental results show the effectiveness and validity of the proposed method.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권9호
• /
• pp.565-571
• /
• 2000

SRM has been applied to many commercial applications that require economical advantages and high performance abilities. But it has some drawbacks such as acoustic noise due to the abrupt change of mmf level when commutation. The abrupt change of a phase excitation produces mechanical stresses and it results in torque ripple and noise. This paper deals with an analysis of vibration and noise in SRM drive. Several types of excitation method are taken into account. The 1-phase and 2-phase excitation technique of short-pitch winding 2-phase excitation technique of full-pitch winding are tested. The acoustic noise is reduced remarkably through the sequential phase excitation in the 2-phase excitation. It is because that the scheme reduces abrupt change of excitation level by distributed balanced excitation with free-wheeling during commutation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.649-651
• /
• 2015

This paper describes a robust adaptive sliding mode control (RASMC) for torque ripple minimization of switched reluctance motor (SRM) using it in automotive application. The objective is to control effort smoothness while the system is under perturbations by unstructured uncertainties, unknown parameters and external disturbances. The control algorithm employs an adaptive approach to remove the need for prior knowledge within the bound of perturbations. This is suitable for tackling the chattering problem in the sliding motion of sliding mode control method. The algorithm then incorporates modifications in order to build a chattering-free modified robust adaptive sliding mode control using Lyapunov stability theory.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.502-505
• /
• 1998

In this paper, the new vector control scheme of BLDCM producing loss-minimized ripple-free torque based on the d-q-Ο reference frame is presented including 3 phase unbalanced condition. The optimized phase current wave-forms that are obtained by the proposed method can be a reference values and the motor winding currents are forced to track it by delta modulation technique. As a results, it can be shown that the proposed work provides a simple and clear way to obtain an optimal motor excitation current.

• 대한전기학회논문지
• /
• 제43권6호
• /
• pp.982-990
• /
• 1994

In this paper, we consider feedback-kinearizing control of brushless dc motors which have been increasingly used in high-performance servo applications, We completely characterize the whole class of the feedback controllers that enable the brushless dc motors to behave like linear systems but without torque ripple. The whole class of the feedback-linearizing controllers is characterized in the explicit form which contains a function to be chosen freely. The previously known controllers correspond to either the particular ones in our whole class of the feedback-Linearzing controllers or their truncated Fourier expansions. This free function can be used to achieve other control objectives as well as linear dynamic characteristics. Furthermore, our feedback-linearizing controllers can be easily determined from the measurement data of back EMF.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.428-429
• /
• 2018

본 논문은 결합 인덕터를 이용한 입력 전류 리플이 없는 고승압 캐스케이드 부스트 DC-DC 컨버터를 제안한다. 기존 캐스케이드 부스트 컨버터의 단점을 보완하기 위해 제안되었다. 제안된 컨버터는 1차 부스트 단의 보조회로에 의해 입력 전류 리플이 상당히 제거되었으며 2차 부스트 단에 결합 인덕터를 적용하여 높은 전압 이득을 달성하였다. 제안된 컨버터는 이론적 해석과 200[V]-200[W]하드웨어 시작품을 제작하여 검증하였다.

• Journal of Power Electronics
• /
• 제14권3호
• /
• pp.432-443
• /
• 2014

In order to improve the output efficiency of solar cells and to extend the life span of batteries, the input currents of converters are required to be continuous. If low output voltage ripple is required at the same time, it is obvious that the application of basic two-order converters (such as Buck and Boost derived converters) will not be good enough. In this paper, a lot of non-isolated push-pull converters (NIPPCs) with continuous current will be introduced due to their lower current stress, higher efficiency and better EMC performance. By decomposing the converters into push-pull cells, inductor and free-wheeling diodes, two families of NIPPCs based on single inductor and coupled inductor separately are systematically generated. Furthermore, characteristics analyses for some of the generated converters are also shown in this paper. Finally, two prototypes based on the corresponding typical topologies are built in the lab to verify the theoretical outcomes.

• 한국관광식음료학회지:관광식음료경영연구
• /
• 제17권1호
• /
• pp.41-67
• /
• 2006

The study is aimed to analyze the influence of FTA(Free Trade Agreement) between Korea and Japan on tourism and to suggest ways to increase tourists exchange between them by considering countermeasures of Korea's tourism based on the analysis and deriving political significance. The results of the study showed that the expected effects of FTA between Korea and Japan on tourism would overall be positive. There would be increases in employment and a higher rate of foreign-exchange earning, which plays a critical role in the cash flow. Therefore the government is required to prepare for several political measures as follows. First, ways to promote investment in tourism have to be established in a systematic way for FTA. Second, restructuring of tourism has to be considered seriously for tourism to be a high value-added industry after FTA. Third, the tourism information industry needs to be included in the tourism promotion act to promote e-tourism using information technology. In addition to this, an expansive cluster strategy needs to be developed, which relates tourism to other industries like culture and movies and to find ways to re-locate and re-educate manpower currently engaged in the tourism industry. Though the study investigated the influence of FTA on tourism through a practical analysis, it was restricted only to Korea. So the influence of FTA between Korea and Japan on the tourism of Japan should be included in further study. Furthermore, in subsequent studies the CGE(Computable General Equilibrium) model will be applied for objective analysis of the effects. Or measuring the ripple effect with multinational inter-industry relation table will be made for the study to make practical contributions to the development of government policy.