• 한국의류산업학회지
• /
• 제13권3호
• /
• pp.425-431
• /
• 2011

The purpose of this study was to investigate washing effects according to the rinsing conditions and the characteristics of soiled fabrics. In this study rinsing conditions including rinsing cycle, time, temperature, and bath ratio were examined. The foamability of rinsing bath was also examined. The quantity of LAS in the rinsing bath and extracts of test fabrics was analyzed after washing and rinsing, respectively. The results of these experiments were as follows: The washing effects of soiled fabrics were varied from the kinds of soils and rinsing conditions. The removal of soils from fabrics was increased by the first rinsing after washing effectively. The priorities of rinsing conditions were rinsing temperature> rinsing time > rinsing cycles> references. Foamability was result from residual LAS in rinsing bath and fabrics extracts after rinsing. The residual quantity of LAS was references > rinsing cycles> rinsing time> rinsing temperature, which shown rinsing temperature was the most efficient factor of the rinsing performance.

• 한국의류학회지
• /
• 제18권1호
• /
• pp.23-30
• /
• 1994

The objective of this study was to analyze the effect of the dissolution of detergent on washing and rinsing efficiency, and the possibility of saving detergent in washing. Washing and rinsing efficiency were reviewed in three different ways : A method was to input dissolved detergent by the use of rapid detergent dissolution instrument, B method was to input dissolved detergent beforehand, and C method was to input undissolved detergent. The results were as follows 1. A method > B method > C method was shown in detergency with washing time and three method's gaps were reduced because detergent dissolution effect was reduced by mechanical action in proportion of washing time. Especially, according to detergency of A method of 0.07% and C method of 0.1% was appeared approximately, saving detergent was expected by rapid dissolution of detergent. 2. A method > B method > C method was shown in detergency with washing temperature. As the washing temperature rose, the detergent reached chemically more activated state and become easily soluble. It resulted for the detergent to penetrate and adhere to laundry easily. 3. A method > B method > C method was shown in detergency with detergent concentration and C method was more sensitive than A, B method against change of detergent cocentration. Rapid detergent dissolution made it possible not only to enhance the washing efficiency but also to save the detergent because detergency of A method in low concentration is higher than that of C method. 4. A method $\geq$ B method > C method was shown in rinsing ratio with detergent input method. It indicated input dissolved detergent was advantageous in rinsing. 5. The result of anion surfactant concentration test of each process with detergent input method was shown like that A method In B method > C method in washing and reverse result was shown in rinsing. The anion surfactant concentration of C method was low during washing but high during rinsing. This was identical with previous results which shown the washing and rinsing efficiency improved with dissolved detergent usasge. 6. C method > B method > A method was shown in the degree of remaining detergent after rinsing. There was no remaining detergent after second rinsing in A and B method, but in C method four rinsings were required for the same result. Consequently, in A and B methods, less water and electricity were used, and less abrasion of cloth.

• 방사성폐기물학회지
• /
• 제19권2호
• /
• pp.271-278
• /
• 2021

In this study, a chlorination technique for recycling Li₂ZrO₃, a reaction product of ZrO₂-assisted rinsing process, was investigated to minimize the generation of secondary radioactive pyroprocessing waste. It was found that the reaction temperature was a key parameter that determined the reaction rate and maximum conversion ratio. In the temperature range of 400-600℃, an increase in the reaction temperature resulted in a profound increase in the reaction rate. Hence, according to the experimental results, a reaction temperature of at least 450℃ was proposed to ensure a Li₂ZrO₃ conversion ratio that exceeded 80% within 8 h of the reaction time. The activation energy was found to be 102 ± 2 kJ·mol^-1·K^-1 between 450 and 500℃. The formation of LiCl and ZrO₂ as reaction products was confirmed by X-ray diffraction analysis. The experimental results obtained at various total flow rates revealed that the overall reaction rate depends on the Cl₂ mass transfer rate in the experimental condition. The results of this study prove that the chlorination technique provides a solution to minimize the amount of radioactive waste generated during the ZrO₂-assisted rinsing process.

• 대한기계학회논문집A
• /
• 제32권4호
• /
• pp.303-309
• /
• 2008

Dense and fine polymer patterns often collapse, as they come into contact with each other at their protruding tips. Resist pattern collapse depends on the aspect ratio of patterns and the surface tension of rinsing materials. The pattern collapse is a very serious problem in microfabrication, because it is one of the factors which limit the device dimensions. The reasons for the pattern collapse are known as the surface tension of rinse liquid, centrifugal force and rinse liquid flow produced in the developing process. In this work, we tried to evaluate the pattern collapse of three-dimensional microstructures that were fabricated by two-photon induced photopolymerization, and showed the way how to reduce the deformation of microstructures.

• 한국정밀공학회지
• /
• 제24권12호
• /
• pp.119-127
• /
• 2007

Recently, microstructures fabricated using microstereolithography technology have been used in the biological, medical and mechanical fields. Microstereolithography can fabricate real 3D microstructures with fine features, although there is presently a limited number of materials available for use in the process. Deformation of the fine features on a fabricated microstructure remains a critical issue for successful part fabrication, and part deformation can occur during rinsing or during fabrication as a result of fluid flow forces that occur during movement of mechanical parts of the system. Deformation can result in failure to fabricate a particular feature by breaking the feature completely, spatial deflection of the feature, or attaching the feature to neighboring microstructures. To improve mechanical strength of fabricated microstructures, a clay nanocomposite can be used. In particular, a high-aspect ratio microstructure can be fabricated without distortion using photocurable liquid resin containing a clay nanocomposite. In this paper, a clay nanocomposite was blended with a photocurable liquid resin to solve the deformation problem that occurs during fabrication and rinsing. An optimal mixture ratio of a clay nanocomposite was found through tensile testing and the minimal allowable distance between microstructures was found through fabrication experimentation. Finally, using these results, high-aspect ratio microstructures were fabricated using a clay nanocomposite resin without distortion.

• 한국치위생학회지
• /
• 제12권6호
• /
• pp.1212-1220
• /
• 2012

Objectives : This study is designed to survey of proper practice of toothbrushing place in elementary school, middle school and high school in some part of Gyeonggi-Do, and will be utilized for toothbrushing place management. Methods : It was randomly selected, 8 elementary schools, 6 middle school and 6 high school in Gyeonggi-do, surveyed whole students. Survey duration was from May 11th to May 20th in 2011. The surveying paper was consisted of questions of general characteristics, right practice of toothbrushing and toothbrushing after lunch etc. It was done under teacher's control. The Data was analyzed with SPSSWIN 18.0. Results : Students did toothbrushing 2 times/day. It wasn't done by Elementary students of 56.3%, middle school students of 68.5%, high school students of 39.3%. It was dominant reason for no brushing that Carrying toothbrush and toothpaste was annoying. When students washed their hands and rinsed their mouth, they used toilet facuet in over than 90% schools. Satisfaction ratio was very low in elementary, middle, high schools. 60% of students wanted to get mouth rinsing place in each school or separately nearby toilet. Conclusions : It was thought by 60% students of elementary, middle, high school that toothbrushing after meals was most important activity. But It was not well done after lunch. When whole student did toothbrushing together, they couldn't use mouthrinsing place comfortablely. There were no keeping places for toothbrushes. So more attention should be payed to make plenty mouthrinsing places and manage them well.

• Journal of Periodontal and Implant Science
• /
• 제50권4호
• /
• pp.268-277
• /
• 2020

Purpose: Many home care treatments can be used to promote the health and longevity of dental implants; however, few studies are available to support the concept that self-performed oral hygiene behaviors are an essential tool for improving and maintaining oral health. We investigated age-stratified associations between dental health behaviors related to tooth brushing (TB) and oral hygiene product use in Korean adults with implants. Methods: A total of 1,911 subjects over 19 years of age who had 1 or more implants and who participated in the 2013 to 2015 Korea National Health and Nutrition Examination Survey were reviewed. Periodontal status was assessed using Community Periodontal Index (CPI) scores, and periodontitis was defined as a CPI greater than or equal to 3. The complex sampling design of the survey was utilized to obtain the variance and individual weight of each analyzed factor. A high CPI was the outcome variable, and the main explanatory variables were oral hygiene behaviors, such as TB, dental floss (DF), interproximal brushing, and mouth rinsing. Results: Almost all individuals with a lower CPI brushed their teeth twice or more per day, in contrast to those with a higher CPI, and were likely to use DF. The adjusted odds ratio of not using DF for a higher CPI was 1.83 (95% confidence interval, 1.35-2.49). Conclusions: TB was implemented more than twice a day by patients with good oral health, and the combination of TB and DF significantly reduced the prevalence of a higher CPI. Self-performed oral hygiene practices combining TB and DF were significantly related to a low prevalence of periodontitis in implant patients.

• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.369-378
• /
• 2011

Purpose: This study was carried out for the purpose of obtaining basic data necessary for developing the future oral health promotion program of the elderly by surveying the actual condition of managing dental prosthesis in the elderly. Methods: It collected materials targeting 346 elderly brackets in over 65 years old who dwell in Seoul and Gyeonggi-do Province for about 10 months from September 2010 to June 2011, analyzed 312 copies except 34 copies, which are inappropriate for data processing due to being insufficient in response among these things, and obtained the following results. Results: In the actual condition of missing tooth, a case of missing tooth was indicated to be 78.8%. In case of missing tooth, the number of missing teeth was indicated to be 75.6% for under 5 pieces and 19.1% for over 21 pieces. In the actual condition of managing prosthesis, a case with dental prosthesis treatment was indicated to be 77.6%. A kind of prosthesis was indicated to be the highest in fixed partial dentures with 36.5%. In a method of rinsing dentures, 47.7% of the elderly responded as saying of washing it out with water. The appearance of removing dentures at night was indicated to be the highest in doing so with 63.1%. Satisfaction with prosthesis of being mounted now was indicated to be moderate with 50.4%. As for the appearance of having experience of education on how to manage prosthesis, it was indicated to be high with 50.4% in having none. In a kind of prosthesis depending on averagely monthly income, the ratio of total dentures was high when averagely monthly income is low. On the other hand, a case with high income was indicated to have high ratio in implants. The satisfaction with prosthesis was low when averagely monthly income is low. Also, in the experience of education on how to manage prosthesis, the ratio of responses as saying of having no experience of education on how to manage prosthesis was indicated to be high when averagely monthly income is low. Conclusion: Examining the above results, a developmental plan is considered to be necessary such as developing continuous and systematic oral health promotion program for managing elderly people's managing dental prothesis.

• 한국식품과학회지
• /
• 제16권4호
• /
• pp.418-422
• /
• 1984

과일과 채소에 오염(汚染)된 잔류농약(殘留農藥)의 세척(洗滌)효율을 알기 위하여 상추, 열무, 풋고추, 딸기, 포도에 말라티온을 인위적으로 처리하고 가정(家庭)에서의 세척(洗滌)방법에 준하여 실험한 결과는 다음과 같다. 물에 의하여 3회 세척한 후의 말라티온 잔류율(殘留率)은 포도 9.7%, 풋고추 25.2%, 딸기 28.0%, 열무 29.7%, 상추 38.9%, 배추57.5%로서 배추에서 세척(洗滌)효율이 가장 낮았다. 연성세제(軟性洗劑)로 1 회 세척하고 물로 2 회 수세(水洗)한 후의 말라티온 잔류율(殘留率)은 포도 1.6%, 풋고추 8.3%, 열무 15.8%, 딸기 24.8%, 상추 27.2%, 배추 45.9%로서 세제(洗劑)에 의한 효과가 현저히 증가하였다. 부착(附着)된 말라티온은 1 회 세척에서 가장 많이 제거되었고 그후의 세척에서는 별로 제거되지 않았다. 수온(水溫)이 $5{\sim}35^{\circ}C$ 범위에서는 세제(洗劑) 효율에 큰 차이가 없었고, $100^{\circ}C$에서는 세척효율이 이보다 $2{\sim}3$배 더 높았다.

• 마이크로전자및패키징학회지
• /
• 제16권1호
• /
• pp.45-50
• /
• 2009

레이저를 이용 실리콘 관통형 접속기술인 TSV(Through-Silicon-Via)를 형성할 경우 Debris(파편물) 및 Particle이 발생되므로 이를 제거하기 위한 세정공정을 연구하였다. 계면활성제를 이용한 화학적 세정과 Brush를 이용한 물리적 세정을 검토하기 위하여 세정기를 제작하고 8인치 CMOS Image Sensor wafer에 직경 $30{\mu}m$, 깊이 $100{\mu}m$를 갖는 Via를 제작하여 두 가지의 세정방법을 연구하였다. 세정액은 DI Water와 계면활성제의 혼합비 2:1에서 Debris 범위가 $73{\mu}m^2$로 희석비가 낮을수록 세정력이 우수하였다. 레이저의 주파수와 속도변위에 따른 가공 조건 변화에는 Debris 분포차가 5% 미만으로 세정력에는 영향이 없었다. Brush를 이용하여 Debris를 제거하는 실험에서 Strip $1000{\sim}3000rpm$, Rinse $50{\sim}3000rpm$, Brush $200{\sim}300rpm$ 으로 증가시켜 세정하였을 때 Crack이나 손상 없이 Debris의 분포가 감소하였다. 따라서 화학적 세정과 물리적 세정으로 Debris를 제거할 수 있다.