• 복식문화연구
• /
• 제21권6호
• /
• pp.950-960
• /
• 2013

The purpose of this research is to provide accurate information of household washers and detergents for consumers, so that help the producers who make washing machine and detergent to get basic material and also help consumers to choose washing machine. Experiment was proceed with two type of washers to compare energy consumption, washing performance, rinsing effectiveness further, damage caused by entanglement of laundry and fabric was assessed. Detergent P and T were used to compare the performance related to differences of ingredients of detergent. Soiled fabrics of EMPA 108 set were used to evaluate performance of washing by different types of contamination. A summary of experimental results are : First, for the consumption of water, drum-type washer consumed 53% less than pulsator-type washer. On the other hand, the washing time was almost similar for both these machines, but pulsator-type washer showed shorter progress, implying that power saving was more efficient in this case. Second, the drum-type washer showed better performance for contamination with all types of detergent, but the pulsator-type washer showed better rinsing performance. Third, the drum-type washer performed less data of tangle level and fabric damage. Fourth, detergent "P" exhibited better washing performance than did detergent "T", regardless of the type of soil. And with no limit of detergent variety, water-soluble protein soil showed high removal rate, liposoluble soil especially pigment was hardly removed.

• Restorative Dentistry and Endodontics
• /
• 제40권4호
• /
• pp.299-305
• /
• 2015

Objectives: The purpose of this study was to investigate the effectiveness of multiple decontamination procedures for salivary contamination after curing of a universal adhesive on dentin bond strength according to its etch modes. Materials and Methods: Forty-two extracted bovine incisors were trimmed by exposing the labial dentin surfaces and embedded in cylindrical molds. A universal adhesive (All-Bond Universal, Bisco) was used. The teeth were randomly divided into groups according to etch mode and decontamination procedure. The adhesive was applied according to the manufacturer's instructions for a given etch mode. With the exception of the control groups, the cured adhesive was contaminated with saliva for 20 sec. In the self-etch group, the teeth were divided into three groups: control, decontamination with rinsing and drying, and decontamination with rinsing, drying, and adhesive. In the etch-and-rinse group, the teeth were divided into four groups: control, decontamination with rinsing and drying, decontamination with rinsing, drying, and adhesive, and decontamination with rinsing, drying, re-etching, and reapplication of adhesive. A composite resin (Filtek Z350XT, 3M ESPE) was used for filling and was cured on the treated surfaces. Shear bond strength was measured, and failure modes were evaluated. The data were subjected to one-way analysis of variation and Tukey's HSD test. Results: The etch-and-rinse subgroup that was decontaminated by rinse, drying, re-etching, and reapplication of adhesive showed a significantly higher bond strength. Conclusions: When salivary contamination occurs after curing of the universal adhesive, additional etching improves the bond strength to dentin.

• 한국환경보건학회지
• /
• 제23권4호
• /
• pp.67-72
• /
• 1997

To evaluate the effectiveness of water treatment using nanofiltration, ultrafiltration, and microfiltration systems, tapwater contaminated by bacteria and nitrate nitrogen was filtered, and then the rates of removal for many kinds of contaminants were comp.ared and investigated. The rates of turbidity removal by these systems are around 80% all of them. However, nanofiltration system is the most effective as hardness removal is 80%, suspended solids 90%, total residual chlorine 90% and nitrate nitrogen 69%. Among nanofiltration, ultrafiltration and microfiltration systems, nanofiltration system is the most stable in flow rate of permeate. Comparing hollow and spiral type of ultrafiltration, microfiltration each, spiral type is more stable than hollow type owing to rinsing effect of brine. The values of pH in ultrafiltration and microfiltration systems are between 7, 0 and 7.5, and that of nanofiltration system is low to 6.2-7.0. The effectiveness of heterotrophic bacteria removal is the most excellent in the nanofiltration system.

• Imaging Science in Dentistry
• /
• 제44권2호
• /
• pp.149-154
• /
• 2014

Purpose: This study assessed the effectiveness of three antimicrobial mouthrinses in reducing microbial growth on photostimulable phosphor (PSP) plates. Materials and Methods: Prior to performing a full-mouth radiographic survey (FMX), subjects were asked to rinse with one of the three test rinses ($Listerine^{(R)}$, $Decapinol^{(R)}$, or chlorhexidine oral rinse 0.12%) or to refrain from rinsing. Four PSP plates were sampled from each FMX through collection into sterile containers upon exiting the scanner. Flame-sterilized forceps were used to transfer the PSP plates onto blood agar plates (5% sheep blood agar). The blood agar plates were incubated at $37^{\circ}C$ for up to 72 h. An environmental control blood agar plate was incubated with each batch. Additionally, for control, 25 gas-sterilized PSP plates were plated onto blood agar and analyzed. Results: The mean number of bacterial colonies per plate was the lowest in the chlorhexidine group, followed by the Decapinol, Listerine, and the no rinse negative control groups. Only the chlorhexidine and Listerine groups were significantly different (p=0.005). No growth was observed for the 25 gas-sterilized control plates or the environmental control blood agar plates. Conclusion: The mean number of bacterial colonies was the lowest in the chlorhexidine group, followed by the Decapinol, Listerine, and the no rinse groups. Nonetheless, a statistically significant difference was found only in the case of Listerine. Additional research is needed to test whether a higher concentration (0.2%) or longer exposure period (two consecutive 30 s rinse periods) would be helpful in reducing PSP plate contamination further with chlorhexidine.

• 대한치과의사협회지
• /
• 제53권2호
• /
• pp.120-131
• /
• 2015

Objective: The purpose of this study is to compare the surgical treatment with conservative treatment and to evaluate the effectiveness of drug-holiday in bisphosphonate related osteonecrosis of the jaw (BRONJ) patients who were diagnosed as stage 2. Patients and Method: From January 2012 to October 2014, seventy-two patients who visit to Pusan National University of Dental Hospital were diagnosed as stage 2 of BRONJ. All the patients had taken computed tomography(CT) and panoramic radiography. The surgical treatment including sequestrectomy of necrotic bone and curettage of soft tissue around the sequestrum were performed to fifty patients. Twenty-two patients underwent conservative treatment such as antibiotics medications, mouth rinsing and follow up checking for every two weeks. Prognosis of treatment was classified into 3 groups - response, unresponse, and worsens - according to clinical, radiographic symptoms. P-value less than 0.05 were regarded as significant. Results: In surgery group, forty-five patients (90%) were healed without recurrence or any complication and five patients (10%) showed the wound dehiscence or infection. In conservative treatment group, fifteen patients (68.2%) were healed without any complication, four patients (18.2%) did not show improvement and three(4.2%) patients$^{\circ}{\emptyset}$ symptoms increased. P-value among groups was 0.014. Evaluation of preoperative drug-holiday in surgery group did not show the effectiveness(p=0.478). Conclusion: Statistically, the prognosis of patients with stage 2 BRONJ treated with surgery was significantly better than conservative treatment. There was no statistical difference for the preoperative drug-holiday.

• 대한소아치과학회지
• /
• 제44권1호
• /
• pp.72-81
• /
• 2017

본 연구의 목적은 유치 상아질의 복합레진 술식에서 각 단계별로 치면에 인공타액이 오염되었을 때와 이것을 제거하는 방법이 한 단계 자가부식 접착제와 두 단계 산 부식 접착제의 결합강도에 미치는 영향을 비교 분석하는 것이다. 연구 목적을 달성하기 위해, 건전한 유구치 42개를 선정하여 세 종류의 상아질 접착제인 Scotchbond Universal Adhesive(SBU), All-Bond Universal(ABU)과 Prime & Bond NT(PNT)에 따라 3개의 군으로 분류하였다. 이를 다시 각 접착제에서 7개의 하위 그룹으로 나누었다. 대조군인 1군을 제외한 나머지 군은 인공타액으로 오염시킨 군으로 다음과 같이 분류하였다: 2, 3군 - 접착제 도포 전; 4, 5군 - 접착제 중합 전; 6, 7군 - 접착제 중합 후. 인공타액은 수세, 건조(2, 4, 6군)와 건조(3, 5, 7군)로 제거하였다. 처치된 치면에 복합레진(Filtek, Z-350)으로 수복하고 시편을 제작한 후 미세인장 결합강도(Microtensile bond strength, MTBS)를 측정하였다. One-way ANOVA와 Tukey HSD test를 이용해서 통계분석을 실시하였다(p < 0.05). 대조군에서 MTBS의 평균값은 PNT가 ABU와 SBU에 비해 높게 나타났다(p < 0.001). 세 가지 접착제의 각 오염단계에서 수세와 건조를 시행했을 때(2, 4, 6군)가 건조만 시행했을 때(3, 5, 7군)보다 높은 결합강도를 나타내었다. 그리고 접착제 중합 전 단계에서 인공타액의 오염이 발생했을 때(4, 5군)는 대조군에 비해 낮은 MTBS를 보였다(p < 0.001). 전반적으로 두 단계 산 부식 접착제가 한 단계 자가부식 접착제에 비해 높은 MTBS를 보였다. 접착제를 중합하기 전 단계에서 인공타액에 오염되었을 경우에는 접착 강도가 현저히 감소하였고, 수세와 건조 과정으로 접착강도를 회복할 수 없었다.

• 치위생과학회지
• /
• 제11권6호
• /
• pp.521-526
• /
• 2011

본 연구에서는 학교구강보건실 운영이 초등학교 아동들의 치아우식증 예방에 기여하는 효과를 평가할 목적으로 대구광역시 남구보건소에서 보건복지부의 지원으로 학교구강보건실이 설치된 초등학교를 관리군으로 선정한 후 구강검진 자료를 이용하여 우식경험영구치면지수, 열구전색영구치수 및 열구전색 영구치 보유자율 등의 여러 가지 구강건강지표를 산출하였다. 또한 사업효과 평가를 위해 대조군으로 선정된 인근의 초등학교의 구강건강실태조사 자료와 비교하여 다음과 같은 결론을 얻었다. 1. 조사대상 아동의 우식경험영구치면지수는 관리군 초등학교 1-6학년 아동이 0.07면, 0.39면, 0.55면, 0.67면, 0.81면 및 1.79면이었고, 대조군 초등학교 1-6학년 아동이 0.31면, 0.86면, 1.07면, 1.04면, 2.71면 및 3.08면으로 고학년인 5, 6학년에서 유의하게 낮았다(p<0.05). 2. 조사대상 아동의 열구전색영구치수는 관리군 초등학교 1-6학년 아동이 0.44개, 3.34개, 3.35개, 3.80개, 4.31개 및 4.97개였고, 대조군 초등학교 1-6학년 아동들은 0.98개, 1.45개, 2.26개, 2.51개, 1.73개 및 2.68개로 관리군의 1학년을 제외한 모든 아동에서 보유하고 있는 치면열구전색영구치수는 대조군보다 유의하게 많았다(p<0.001). 3. 조사대상 아동의 열구전색영구치 보유자율은 관리군 초등학교 1-6학년 아동이 19.5%, 100.0%, 96.4%, 96.1%, 98.1% 및 97.0%였고, 대조군 초등학교 1-6학년 아동의 33.3%, 52.9%, 73.3%, 72.5%, 53.8% 및 60.0%로 1학년을 제외하고는 모든 학년에서 통계적으로 유의하게 높았다(p<0.05). 이상의 결과를 종합해 보면, 초등학교 아동들에게 학교구강보건실 운영은 치아우식증을 효과적으로 예방할 수 있으며, 효과를 최대화시키기 위해서는 장기간 지속적이며, 포괄적인 구강보건진료의 시행이 필요합니다.