• 동력기계공학회지
• /
• 제16권1호
• /
• pp.91-97
• /
• 2012

It is being accelerated to develop environment-friendly vehicles to solve problems on the energy and environment of earth. The electric driving motor commonly installed in these vehicles has the excellent control capability such as fast response and accurate generation to torque control command. Especially, in-wheel motor has the additional merit such as independently driving each wheel in vehicle. Recently, being developed various control algorithm to enhance the safety and stability of vehicle motion using actively the merits of in-wheel motor. In addition to that, being issued the possibility of enhancing the ride comfort and attitude of vehicle motion such as pitching and rolling. In this paper, investigate the theoretical relationship between the braking/driving force and the motion of sprung mass of vehicle and propose the control method to enhance the ride comfort and attitude of vehicle motion. The proposed control method is proved through the simulation with vehicle model provided by TruckSim software which is commercial one and specializes in vehicle dynamics.

• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.128-137
• /
• 2003

Continuously variable damper can yield diverse damping forces for a single damping velocity. It is widely used in the semi-active suspension system since, with right control logics, it can enhance ride comfort compared to the passive damper while not degrading driving safety. A key to the successful design of the continuously variable damper is the knowledge of its complex and nonlinear characteristics. In this paper, research has been done for analyzing characteristics of the continuously variable damper. Various damper components have been investigated and their effects upon the force-velocity characteristics of the damper have been examined. The effects of the damper characteristics change upon ride comfort and driving safety have also been investigated by numerical simulations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1093-1098
• /
• 2002

Dynamic behaviors of the Korean High-speed Train(KHST) have been analyzed to investigate the performance on the stability, the safety and the ride comfort. Multi-body dynamics analysis program using Recursive method, called RecurDyn, have been employed in the numerical simulation. To model the wheel-rail contact, the RecurDyn uses its built-in module which uses the square root creep law. The accuracy of the rail module in RecurDyn. however, decreases in the analysis of flange contact because it linearizes the shape of the wheel and rail. To solve this problem, a nonlinear contact theory have been developed that considers the profiles of the wheel and rail. The results show that the KHST still needs more stability. The problem should be solved by the examinations of module and modeling.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.159-166
• /
• 1999

In this paper, running performance analyses of an articulated light rail vehicle are carried out using VAMPIRE software package. The stability analysis to determine the critical speed and the safety analysis such as derailment coefficients, lateral forces of wheels and reduction of wheel load are carried for the track conditions of straight, transition and curving range to the operating velocity of 40km/h. Also, ride quality is analyzed. As the results of analysis, the safety of light rail vehicle satisfied with the limit values and the ride quality for tare and full load condition was shown to the "not uncomfortable" level in ISO 2631-1 (1997) criteria.

• 한국안전학회지
• /
• 제28권3호
• /
• pp.23-28
• /
• 2013

This study focuses on finding ways to derive train's optimal ECO driving pattern, which can improve the ride quality and reduce driving energy consumption with keeping the time interval between the stations. As research method, we compared difference of currently operating train's ATO and MCS driving patterns, and concentrated upon the things need to consider in simulation in order to improve the existing pattern of ATO driving pattern's issues with securing the train operation safety. Determining driving pattern minimizing energy consumption by controlling powering within speed limit and controlling switching to coasting at appropriate point considering the track conditions for each section, and determining braking control starting time considering ride comfort and precise stopping is considered to be most important.

• 한국철도학회논문집
• /
• 제10권5호
• /
• pp.540-545
• /
• 2007

틸팅 열차는 곡선 구간에서 차체가 안쪽으로 기울어져 고속으로 회전해도 탈선하지 않는 열차를 말한다. 여러해 동안 한국철도기술연구원에서는 이 열차를 개발해왔다. 이 논문에서는 그동안 개발되어온 틸팅 열차의 동역학해석을 수행하였다. 이를 통해서 국제기준에 맞는 안정성과 주행성능을 지니고 있는지 확인하고 향후 속도 개선의 기본 자료를 생성하였다.

• 한국안전학회지
• /
• 제34권1호
• /
• pp.90-97
• /
• 2019

This study is aiming to compare stair ascent transportation speed and physical burden of evacuation supporters according to the types of stair ascent transportation for vulnerable people experimentally. In this study, we measured heart rate of the supporters to indicate physical burden during the transportation. The subjects of this experiment were male students, age of 20-26. Experimental conditions were the ways of stair transportation and the weight of vulnerable people. The types of stair transportation were giving a piggyback ride and carrying a wheelchair. Each experimental trial was video-recorded for measurement of ascent speed and observing supporters movement. As a result of the experiment, as for the ascent transportation speed by piggyback ride from the first floor to the fourth floor, the average speed of the light case is 31 seconds and for the heavy case is 43 seconds. When it comes to the average speed of wheelchair transportation's average speed the light case is 1 minute and 11 seconds and the heavy case is 1 minute and 49 seconds. Therefore, it was indicated that when the weight of a vulnerable people is lighter, the transportation speed is faster. The heart rates of evacuation supporters are different depending on transportation methods or individual's condition but as repetitive transportation increases, they tend to reach the maximum heart rates.

• 한국안전학회지
• /
• 제32권3호
• /
• pp.117-122
• /
• 2017

In this study, we studied the ride quality considering the deterioration effects of the three type couplers (single, double, and ring types) for EMUs. In order to know the impact occurred when an urban transit vehicle is under breaking, we tested the conditions of the service brake and the emergency brake. Normal coupler models without any slack showed similar dynamic performance results under all breaking conditions. But if the couplers become old, the initial pre-stresses are removed because of permanent compressive deformation in rubber. For three types of the old coupler models without the initial pre-stress, we evaluated dynamic performances of each type. As the results, the maximum and average acceleration levels of the double type and the ring type were similarly low in all conditions. But the accelerations of the single type coupler was high when compared to those of the double and ring types. In addition, Jerk value of the single type model associated with ride quality was high up to 15 times to the ring type in condition of the service braking in empty vehicle weight. Jerk value of the double type model was high up to 6 times to the ring type.

• 한국철도학회논문집
• /
• 제12권6호
• /
• pp.909-914
• /
• 2009

철도차량의 주행안전성과 승차감을 결정하는데 있어서 현가장치는 중요한 요소이며, 현가장치 강성은 차량 설계 단계의 중요한 설계변수이다. 고속에서의 주행안전성을 위해 1차 현가장치에 강한 강성을 부여하는데 이는 곡선 주행성능을 감소시키는 단점이 있어 주행안전성과 곡선주행성능을 절충하면서 현가장치의 강성을 조절하고 있다. 본 연구에서는 철도차량의 현가장치 강성을 변화시켜 가면서 주행안전성 향상을 위한 현가장치를 최적화하는데 목적을 두고 있다. 현가장치 최적화를 위해 1, 2차 현가장치의 위치 및 길이, 폭, 강성, 감쇠력 등을 설계 변수로 하여 해석을 진행하였다. 현가장치 최적화 해석결과, 1, 2축 내 외측 차륜의 탈선계수 값이 초기 모델과 비교하여 감소한 결과를 확인할 수 있었다.

• 대한기계학회논문집A
• /
• 제37권4호
• /
• pp.581-587
• /
• 2013

반경이 작은 곡선이 종종 존재하는 도시 내에서 운행되는 도시형자기부상열차는 전자석과 레일 사이에 기계적 접촉 없이 곡선주행을 할 수 있어야 한다. 특히, 안내제어가 없는 자기부상열차에 있어서는 승차감을 확보하면서 곡선추종성능을 향상시키기 위하여 차간 댐퍼의 설치가 고려된다. 자기부상 차량용 차간 댐퍼는 곡선 진출입시 차량에 발생하는 요(Yaw) 방향의 진동을 최소화할 수 있어야 함과 동시에, 부상 전자석이 레일과 접촉이 없도록 해야 한다. 본 논문에서는 곡선주행에서의 차간 댐퍼의 승차감과 곡선추종성에의 영향을 분석하는데 목적이 있다. 이를 위하여 부상제어, 차량, 대차 및 궤도가 포함된 동역학 모델을 이용한 동특성 시뮬레이션이 수행된다. 시뮬레이션을 통하여 차간 댐퍼의 효과가 분석되고 시험 선로에서의 주행시험을 실시하여 해석 결과의 신뢰성에 대한 검증이 이루어졌다.