• Applied Biological Chemistry
• /
• v.33 no.1
• /
• pp.24-33
• /
• 1990

The changes in water uptake rate, cooking properties, color of rice grains and gelatinization properties of brown and milled rices during storage were studied. The brown and milled rices were stored at $4^{\circ}$ and $25^{\circ}C$ for 5 and 3 months, respectively. The water uptake rate constants of rices during hydration at $30^{\circ}$ were linearly decreased during storage. The volume increase rate also showed similar trend to the water uptake rate. The terminal point of cooking of milled rice at $100^{\circ}$ in a sealed brass vessel was about a half of that of brown rice. The cooking rate of milled rice was 1.8 times faster than that of brown rice. The cooking rate constant of both brown and milled rices linearly decreased with the increase of storage time. The L(lightness) value increased for brown rice grain and remained unchanged for milled rice grain during storage. The peak viscosity of rice flours by amylograph increased during storage, but enthalpy for gelatinization decreased, as measured by differential scanning calorimetry.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.2
• /
• pp.139-146
• /
• 2013

Surimi products are among the most prominent seafoods in Korea. Together with fish meat, wheat flour is a major ingredient in the preparation of surimi products. Rice flour, however, can be an effective ingredient in enhancing the rheological characteristics of surimi products. In this study, we evaluated the potential of rice flour as an agent to replace wheat flour in surimi products. The effects of rice flour milling types and addition methods on the rheological and sensory properties of surimi products were investigated. Among different addition methods, the surimi product containing non-treated rice flour showed better gel strength and sensory properties than products containing paste (1:1.3 rice flour/water, w/v) and steamed paste (steamed at $100^{\circ}C$ for 30 min). According to the gel strength results for surimi products with added roll-mill (40 mesh) and jet-mill (180 mesh) rice flours, the roll-mill rice flour shows good potential as a replacement for wheat flour. When considering gel strength and sensory properties, an effective amount of rice flour to add was 10-15% (w/w). In conclusion, the rheological and sensory properties of surimi products containing rice flour were comparable with those of a premium commercial surimi product. Therefore, rice flour might be an effective alternative to wheat flour for premium surimi products.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.8
• /
• pp.1264-1269
• /
• 2014

This study investigated the effects of rice starch addition, including native, acetylated, and hydroxypropy-lated rice starch, on the quality characteristics of instant fried noodles. Compared to 100% wheat flour (control), flours containing acetylated or hydroxypropylated rice starch showed reduced initial pasting temperatures as well as peak and breakdown viscosities as determined using a Rapid Visco-Analyzer (RVA). The addition of acetylated and hydroxylated rice starch as well as native rice starch increased cooked weight, volume, and water absorption of the fried noodles compared to control noodles. The addition of native rice starch tended to increase softness of noodles, whereas addition of acetylated or hydroxypropylated rice starch significantly lowered hardness, gumminess, and chewiness values. The results of the sensory evaluation indicate that noodles containing rice starch showed improved sensory characteristics such as color, appearance, flavor, taste, and texture. Especially, acetylated rice starch could be used to improve eating quality of instant fried noodles.

• Korean Journal of Food Science and Technology
• /
• v.11 no.2
• /
• pp.99-104
• /
• 1979

Rheolegical and baking properties of blends containing 10, 20 and 30 % of rice flours (Milyang 23, non-waxy and Tongil waxy) with wheat flour were investigated. Milyang-wheat blends showed higher amylograph paste viscosities at all reference points than waxy-wheat blends. Rice-wheat four blends had shorter farinograph stability than f·heat flour; however, the dough development time was similar between two blends. Breads produced from either Milyang-wheat or waxy-wheat flour blends at 10% rice level were acceptable compared with breads produced from wheat flour.

• Applied Biological Chemistry
• /
• v.51 no.3
• /
• pp.207-211
• /
• 2008

In order to understand the difference in rice eating quality, two rice varieties having different eating qualities were examined from the correlation between palatability score (Toyo value) and components of lipid in rice endosperm. We also analyzed the relationship between lipid properties and physicochemical characteristics of milled rice. Major fatty acids of milled rice starch-lipids, known to exist as inclusion complexes with amylose in starch granules, were palmitic (38.25% in Gopum and 39.75% in Palgong) and linoleic aicds (33.13% in Gopum and 31.93% in Palgong). In addition, the unsaturated fatty acid contents of rice endosperm showed a significant relationship with palatability. Plant sterols in two rice samples were identified, Gopumbyeo of good eating quality had high contents of squlaene and cycloartenol and similar contents of campesterol, stigmasterol and sitosterol. There were significant differences in pasting properties of rice flours and starches between the two cultivars. These results suggested that rice lipids impact on pasting properties after cooking, subsequently relating to palatability.

• Korean Journal of Food Science and Technology
• /
• v.38 no.6
• /
• pp.751-755
• /
• 2006

Physicochemical properties of black rice flours (BRFs) produced under different milling conditions were investigated to explore their applications for various processed rice products. Moisture contents of BRFs after roll milling and subsequent hot-air drying or microwave drying were 10.3% and 14.4%, respectively. The BRFs with jet milling and subsequent hot-air drying or microwave drying showed moisture contents of 7.9% and 7.5%. Mean particle sizes of the BRFs obtained from roll milling, jet milling, and following air-classification were 150, 41.5, and 9.4 ${\mu}m$, respectively. Hunter L value and water soluble index (WSI) of BRFs increased with decreasing particle size, while Hunter a value decreased. Total polyphenol contents of 91.4-115.8 mg/100 g and total amino acids of 75.0-96.4 mg/100 g in three types of BRFs were higher as compared to those (6.3 mg/100 g and 30.5 mg/100 g) of polished rice flour (PRF). Physicochemical properties such as moisture content, color parameter, and WSI have close relationship with the particle size of BRFs prepared under different milling conditions.

• Food Science and Biotechnology
• /
• v.15 no.2
• /
• pp.207-213
• /
• 2006

The effects of gellan gum (from S. paucimobilis), EPS-CB (exopolysaccharide from S. chungbukensis), and a series of commercial gums (arabic gum, xanthan gum, guar gum, deacyl gellan gum), on the swelling, rheological, and pasting properties of non-waxy rice flour dispersions were investigated. The swelling properties of rice flours in gellan or guar gum dispersion after heating were found to have increased with increasing gum concentrations, but the swelling properties of rice flour/other gum systems decreased with increasing concentrations. The rice flour/gum mixtures showed high shear-thinning flow behavior (n=0.14-0.32), and consistency index (K) was higher in guar gum than other gum dispersions. The initial pasting temperatures and peak times increased along with increasing gum concentration. The peak viscosity of rice flour increased in guar gum and deacyl gellan dispersions, and the breakdown and setback viscosity of the rice flour paste was lowest in the xanthan gum system, but remained higher than those of the control. The apparent viscosities of the rice flour/gellan gum mixture pastes were the highest among the tested combinations.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.5
• /
• pp.618-627
• /
• 2016

This study evaluated the hydration, gelatinization, and saccharification properties of rice processing for beverage development. The properties of rice were studied on 10 rice cultivars (Samkwang, Ilpum, Seolgaeng, Anda, Dasan-1, Goami-4, Danmi, American rice, Chinese rice, and Thai rice) and employing four kinds of pre-treatment methods (dry grain, wet grain, dry flour, and wet flour). The results showed that moisture content of rice was between 11.88~15.26%. Increase in soaking time along with highest water absorption was noted in American rice cultivar (46.81%). The water binding capacity of Thai rice was higher when compared to that of other rice flours. In addition, solubility and swelling power of rice were 4.52~26.65% and 0.19~2.05%, respectively. The amylose content of Goami-4 was higher in rice processing. Using a rapid visco analyzer (RVA), the initial pasting temperature of Danmi cultivar was found to be the highest; the peak viscosities of Anda cultivar and Dasan-1 cultivar, and Chinese rice were higher than of those of other rice flours. After saccharification, the pH, soluble solids content, and reducing sugar content of rice processed through different pre-treatment methods were in the range of 6.22~7.08, $4.67{\sim}16.07^{\circ}Brix$, and 0.35~11.67% (w/w), respectively. In terms of color values, the L-value of dry grain, a-value of wet (grain, flour), and b-value of dry sample (grain, flour) were found to be the highest. Assessment of various factors and cultivars characteristics of the raw grains are of importance in the development of rice beverage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.11
• /
• pp.1603-1610
• /
• 2012

The effects of moisture content on the physical properties of cereal extrudates were investigated. Cereal flours (rice, wheat, corn, barley, and oat) were extruded at a barrel temperature of $130^{\circ}C$, feed rate of 120 g/min, and various moisture contents (20, 22.5, 25, 27.5, and 30%). Proximate content, expansion index, specific length, bulk density, breaking strength, apparent elastic modulus, water absorption index (WAI), water solubility index (WSI), specific mechanical energy (SME) input, paste viscosity, and color values were analyzed. Expansion ratio of extruded corn flour was higher than that of other extrudates at low moisture content. Bulk density, specific length, and elastic modulus in all cereals decreased with an increase in moisture content. The WAI increased with an increase in moisture content, whereas WSI decreased. SME input of extruded corn flour was higher than those of other cereal flours at lower moisture content, whereas that of oat flour extrudate was lower than those of other cereals at higher moisture content. Lightness of extruded rice flour was lighter than those of other cereals while that of extruded barley flour was darker.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.331-331
• /
• 2017

This study was conducted to know the influence of air temperature and sunshine duration on yield, chemical component, pigment color difference and starch characteristics of two colored rice cultivars in the plain area of Yeongnam province in Korea. The $L^*$, $a^*$, and $b^*$ value of brown rice in Hongjinju and Josaengheugchal rice cultivars was significantly different at continuous cultivated years, 2015 and 2016. The $L^*$, $b^*$ value of two colored rice was significantly increased in 2016 compared to 2015. The $a^*$ value of Josengheugchal rice cultivar was also significantly higher at 2016 than at 2015. It can be noticed the $a^*$, $b^*$, $L^*$ values in Josaengheugchal varied more than those in Hongjinju. Air temperature during ripening period in 2016 was higher than 2015, especially minimum temperature was too high to proper maturation for rice quality. In Josaengheugchal rice cultivar, sunshine duration after heading was longer in 2016 than in 2015. On the contrary, Hongjinju rice cultivar was ripened under condition of insufficient sunshine duration in 2016. The short growing duration by high temperature and long shiny duration made the lack of pigment for Josaengheugchal brown rice. In Hongjinju rice cultivar, shorten sunshine duration and higher night temperature were the source of the pigment deficiency. The grain size of rice which produced in 2016 was bigger than that of 2015 in both rice cultivars. The 1,000 grain weight of rice from 2016 was also bigger than that of 2015. Head rice ratio was high in the rice cultivars produced in 2015. Protein of milled rice in 2016 was more decreased than that of 2015 in Josaengheugchal rice cultivar, it showed reverse result in Hongjinju rice cultivar. Amylose contents of milled rice in 2016 were more decreased than that of 2015 in Hongjinju rice cultivar. Branch chain length distribution of amylopectin was shown a distinct difference between Josaengheugchal and Hongjinju rice flours by each produced year. Josaengheugchal rice cultivar produced in 2015 had a higher amount of short chains than that of 2016 rice starches. In Josaengheugchal rice cultivar, the pasting temperature and peak, trough, breakdown, final viscosity increased in rice flour which produced at 2016, whereas the setback viscosity and peak time showed lower value than those of rice from 2015. The most pasting properties (except of setback viscosity) of rice starch in Hongjinju rice cultivar grown in 2015 were higher than those of rice cultivar produced in 2016.