• 항공우주시스템공학회지
• /
• 제10권4호
• /
• pp.50-58
• /
• 2016

선행 연구 개발을 통하여 장기 체공 태양광 무인기 복합재 날개의 경량화는 매우 중요한 요소임을 확인하였다. 날개 외피의 좌굴 방지와 비틀림 방지 역할을 하는 구조물인 리브는 날개의 구성 요소 중에 필수적이다. 본 연구는 최적의 복합재 리브를 설계, 제작하기 위하여 복합소재의 이방성 특성을 고려한 다양한 적층 패턴 적용 및 형상에 대하여 리브를 제작하였고. MSC. Patran/Nastran을 이용한 유한요소 해석을 통하여 최대 하중 및 변위 형상을 확인하였으며, 구조 시험을 통하여 측정된 시험 결과를 바탕으로 최적의 리브를 제시하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.910-912
• /
• 2006

Barrier ribs in plasma display panels (PDPs) function to maintain the discharge space between the glass plates as well as to prevent optical cross-talking. The barrier ribs currently employed are typically $300{\mu}m$ pitch, $110{\sim}120{\mu}m$ in height, with upper and lower widths of $50{\mu}m$ and $80{\mu}m$, respectively. It has been reported that barrier ribs can be fabricated by screen-printing, sand blasting, etching and photolithographic processes. In this study, photosensitive barrier rib pastes were formulated and systematically evaluated in terms of photolithographic process variables such as printing, drying, UV exposure, development and sintering. It was found that the use of UV absorbent, polymerization inhibitor and surfactant were very effective in controlling the width uniformity of barrier ribs in the photolithographic method of barrier rib patterning.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.963-966
• /
• 2000

Plasma display panel (PDP) is a type of flat panel display utilizing the light emission that is produced by gas discharge. Barrier Ribs of PDP separating each sub-pixel prevents optical and electrical crosstalk from adjacent sub-pixels. Mold for forming barrier ribs has been newly researched to overcome the disadvantages of conventional manufacturing process such as screen printing, sand-blasting and photosensitive glass methods. Mold for PDP barrier ribs have stripes of micro grooves transferring stripes of glass-material wall. In this paper. Stripes of grooves of which width 48 um, depth 124um, pitch 274um was acquired by machining the material of WC with dicing saw blade. Maximum roughness of the bottom and sidewall of the grooves was respectively 120 nm, 287 nm. Maximum tilt angle caused by difference between upper-most width and lower-most width was 2$^{\circ}$. Maximum Radius of curvature of bottom was 7.75 ${\mu}{\textrm}{m}$. This results meets the specification for barrier ribs of 50 inch XGA PDP. Forming the glass paste will be followed by using mold in the near future.

• Wind and Structures
• /
• 제11권6호
• /
• pp.479-496
• /
• 2008

In this paper, computer simulation of wind flow around a single cooling tower with louver support at the base in the KAZERUN power station in south part of IRAN is presented as a case study. ANSYS FLOTRAN, an unstructured finite element incompressible flow solver, is used for numerical investigation of wind induced pressure load on a single cooling tower. Since the effects of the wind ribs on external surface of the cooling tower shell which plays important role in formation of turbulent flow field, an innovative relation is introduced for modeling the effects of wind ribs on computation of wind pressure on cooling tower's shell. The introduced relation which follows the concept of equivalent sand roughness for the wall function is used in conjunction with two equations ${\kappa}-{\varepsilon}$ turbulent model. In this work, the effects of variation in the height/spacing ratio of external wind ribs are numerically investigated. Conclusions are made by comparison between computed pressure loads on external surface of cooling tower and the VGB (German guideline for cooling tower design) suggestions.

• 한국강구조학회 논문집
• /
• 제17권4호통권77호
• /
• pp.439-447
• /
• 2005

아치 리브가 수직 하중을 받는 경우, 예기치 않게 면내 방향으로 좌굴이 발생될 수 있다. 따라서 설계자는 아치 리브의 면내 안정성을 설계 시 반드시 고려해야 한다. 본 논문에서는 유한 요소 해석을 통하여 수직 등분포 하중을 받는 고정지점 포물선 아치 리브의 탄성, 비탄성 면내 좌굴 강도를 연구하였다. 본 연구에서 사용된 아치 리브의 스냅-스루 현상과 비탄성 거동을 모사하기 위한 유한 요소 해석 모델은 기존 연구자들의 실험 결과를 이용하여 검증되었다. 또한 아치 리브의 면내 극한 강도를 결정하기 위하여 대변형과 재료의 비탄성, 잔류응력을 고려하였으며, 마지막으로 유한 요소 해석의 결과를 EC3 설계기준과 비교, 분석 하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.242-245
• /
• 2006

In this research, a precast concrete slab with two ribs was developed to increase the stiffness of slab. The developed precast slabs are allowed to cast concrete for multi stories and to construct concrete slabs without any props. Seven concrete slabs were tested to investigate the behavior of the developed precast slabs. Test results indicated that the developed slabs showed a similar behavior with the slabs without ribs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1252-1254
• /
• 2005

Recently, PDP barrier ribs require the formation of complex structure so that they are usually formed by etching method. For producing the fine ribs structure, during the etching process the metal ions of matrix (glass) of barrier materials should be understood on the etching mechanism with etching condition. We analyzed the quantity of Pb, Si, and B ions from the etch solution as a function of etching time.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.784-787
• /
• 2003

In this study, water jet etching of aqueous green tape was attempted for processing barrier rib of plasma display panel. This process combines 1) chemical etching between water and aqueous based binder in the tape and 2) mechanical erosion by water jet. Effects of etching parameters such as pressure, temperature and aqueous binder content on the morphology of barrier ribs formed were investigated. The results demonstrated a possibility of processing barrier ribs by water jet etching.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.388-390
• /
• 2003

Paste micro-injection molding process was applied for fabrication of barrier ribs of PDP in an attempt to reduce processing steps and materials loss during the processing. For the paste, a thermally curable one was used and for the mold, a polymeric soft mold was used. It was demonstrated that the micro-molding process can be used successfully in producing barrier ribs of PDP.

• 한국세라믹학회지
• /
• 제37권1호
• /
• pp.57-62
• /
• 2000

In this study, an attempt was made to demonstrate the possibility of using laser scribing method in manufacturing the barrier ribs of plasma display panel. The scribing with a CO2 laser was conducted on the green tape produced by the doctor blade tape casting method. Among the processing parameters, the quenching gas pressure, shape of mask, and laser power were found to affect the depth and angle of the scibed barrier ribs.