• 한국축산식품학회지
• /
• 제32권6호
• /
• pp.803-809
• /
• 2012

본 실험은 유청을 L. acidophilus KCCM 32820과 P. freudenreichii KCCM 31227로 2단계 발효하여 만든 유청 발효물을 식빵 반죽에 첨가하여 반죽의 레올로지 및 품질특성에 미치는 영향을 분석하여 제품의 품질을 개선하고자 하였다. 레올로지 분석 중 Alveograph에서 $P_{max}$는 시험구가 높았고, 신장성은 대조구가 높아 시험구의 반죽 강도가 강한 것으로 나타났다. DSC에 의한 호화특성은 피크온도($T_p$)와 엔탈피(H)에서 대조구와 시험구에서 차이가 없어 유청발효물이 영향을 주지 않는 것으로 나타났다. 제품의 수분함량은 시험구가 다소 높았으나 유의적 차이가 없었다. 조직감은 저장 3일째까지 시험구가 부드러웠으나 4일 이후에는 두 시료간에 차이가 없었다. 유기산 분석 결과 대조구에서는 프로피온산이 검출되지 않았으나 시험구에서는 1.13 mg/g이 검출되었고 젖산은 대조구보다 시험구에서 높게 검출되었다. 노화특성은 대조구에 비하여 엔탈피 ${\Delta}H$(J/g)가 낮은 시험구에서 느린 것으로 나타났다.

• 동아시아식생활학회지
• /
• 제14권4호
• /
• pp.370-378
• /
• 2004

The purpose of this study was to investigate the effect of added nutriprotein and rice powder as a plasticizer on physicohemical property, texture property of Backsulgi. In the physicochemical property, the content of proximate composition of nutriprotein was measured as 6.1% of moisture, 3.6% of carbohydrate, 84.3% of crude protein, 0.6% of crude lipid, 5.4% of ash. The raw material of rice powder was measured as 9.6% of moisture, 83.7% of carbohydrate, 6.0% of crude protein, 0.4% of crude lipid, 0.3% of ash. Swelling power and pore ratio of the control were 78.53% and 72.42%, and tended to increase as the amounts of nutriprotein and plastic rice powder increased. Aging by Avrami eguation retarded in Backsulgi added 10% plastic rice powder than rice powder Backsulgi. All the samples added 2, 4, 6, and 8% nutriprotein at the temperatures of 20 were more effective than others on aging. In texture properties, cohesiveness and springiness were not significantly changed by adding nutriprotein and not significantly changed during the storage period in all samples. Hardness and gumminess decreased by adding 2∼8% nutriprotein and increased during the storage period in all samples. Springiness and gumminess decreased by adding 40% plastic rice powder and increased during the storage period in all sample. Cohesiveness and hardness decreased by the increase of plastic rice powder. The texture characteristics by rheometer showed that Backsulgi with nutriprotein and plastic rice powder exhibited lower in hardness than the control, indicating that nutriprotein and plastic rice powder were effective in retarding retrogradation, which is better when storage time became longer.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권5호
• /
• pp.721-733
• /
• 2019

Objective: The objectives of this study were to investigate the thermal gelation properties and molecular forces of actomyosin extracted from two classes of chicken breast meat qualities (normal and pale, soft and exudative [PSE]-like) during heating process to further improve the understanding of the variations of functional properties between normal and PSE-like chicken breast meat. Methods: Actomyosin was extracted from normal and PSE-like chicken breast meat and the gel strength, water-holding capacity (WHC), protein loss, particle size and distribution, dynamic rheology and protein thermal stability were determined, then turbidity, active sulfhydryl group contents, hydrophobicity and molecular forces during thermal-induced gelling formation were comparatively studied. Results: Sodium dodecyl sulphate-polyacrylamide gel electrophoresis showed that protein profiles of actomyosin extracted from normal and PSE-like meat were not significantly different (p>0.05). Compared with normal actomyosin, PSE-like actomyosin had lower gel strength, WHC, particle size, less protein content involved in thermal gelation forming (p<0.05), and reduced onset temperature ($T_o$), thermal transition temperature ($T_d$), storage modulus (G') and loss modulus (G"). The turbidity, reactive sulfhydryl group of PSE-like actomyosin were higher when heated from $40^{\circ}C$ to $60^{\circ}C$. Further heating to $80^{\circ}C$ had lower transition from reactive sulfhydryl group into a disulfide bond and surface hydrophobicity. Molecular forces showed that hydrophobic interaction was the main force for heat-induced gel formation while both ionic and hydrogen bonds were different significantly between normal and PSE-like actomyosin (p<0.05). Conclusion: These changes in chemical groups and inter-molecular bonds affected protein-protein interaction and protein-water interaction and contributed to the inferior thermal gelation properties of PSE-like meat.

• 한국식품과학회지
• /
• 제43권2호
• /
• pp.235-239
• /
• 2011

홍국 배아미 5%와 10% 벌꿀용액으로 제조한 홍국 발효액종을 10-40% 첨가하여 밀가루 반죽의 레올로지 특성으로 falling number, RVA(rapid visco analyzer), farinograph, alveograph 등을 분석하였다. 홍국 발효액종 첨가량이 증가할수록 falling number 값이 낮아졌으며 10% 첨가시 $363{\pm}7.8s$, 20% 첨가시 $318{\pm}2.1s$이었다. 호화도 특성에서 홍국 발효액종 첨가량이 증가할수록 초기점도 온도와 breakdown은 상승하였고, 최고점도와 set-back값은 낮아졌다. Farinograph에서 대조구와 시험구간에 흡수율은 64.3-65.0%로 유의적 차이가 없었으나 반죽형성시간은 발효액종의 첨가량이 증가할수록 빨라졌고, 안정도는 저하되어 20% 첨가시는 9.3 min, 40% 첨가시는 3.0 min이었으며 약화도도 빨라졌다. Alveograph에서 $P_{max}(mm)$는 대조구가 158.0 mm이었으나 발효액종 첨가량이 많을수록 증가하여 40% 첨가시 190.0 mm이었다. 그러나 L, G, W 등의 값은 낮아졌다. 이상의 실험으로 홍국 발효액종을 20% 첨가까지는 반죽의 레올로지 특성인 제빵적성에 영향이 적어 빵 제조가 가능한 것으로 나타났다.

• 한국식품영양과학회지
• /
• 제41권3호
• /
• pp.430-435
• /
• 2012

제빵용 밀가루인 강력분에 흑마늘 추출액을 0, 5, 10, 15% 첨가하여 반죽의 레올로지 특성으로 Falling number, RVA에 의한 호화 특성, Farinograph, Alveograph 등을 분석하였다. Falling number는 흑마늘 추출액의 첨가량이 증가함에 따라 대조구에 비하여 낮아졌으나 제빵적성의 범위에 있었다. 호화도 특성에서 흑마늘 추출액의 첨가량이 증가함에 따라 호화개시 온도, 최고점도, 유지강도, 최종점도, break down, set back 등 모두가 대조구에 비해 증가하였다. Farinograph 측정에서 흑마늘 추출액 첨가량이 증가할수록 반죽의 강도와 흡수율은 증가하였고, 반죽형성시간은 감소하였으며 안정도와 약화도는 급격히 감소하는 경향을 나타냈다. 반죽의 내성(MTI)은 대조구에 비해 흑마늘 추출액 첨가량이 증가할수록 증가하였으며, FQN은 대조구가 가장 높았다. Alveograph 측정에서 $P_{max}$는 대조구가 가장 높았고 L, G 값은 흑마늘 추출액 15% 첨가구가 가장 높았으며 W값은 15% 첨가구에서 가장 낮았다. 이상의 실험 결과 흑마늘 추출액 5%까지는 첨가가 가능하나 그 이상은 반죽의 레올로지 특성을 저하시켜 제빵 적성이 나빠질 것으로 생각된다.

• 한국식품과학회지
• /
• 제32권2호
• /
• pp.328-334
• /
• 2000

고아밀로오스 옥수수전분으로 제조한 저항전분 ACAMS(Autoclaved-cooled amylomaize VII)와 보통 옥수수전분으로 제조한 ACNMS(Autoclaved-cooled normal maize starch)를 ASW(Australian standard wheat) 밀가루에 저항저분 함량이 5%가 되게 첨가하여 밀가루의 리올리지와 국수의 품질특성에 미치는 영향을 조사하였다. 파리노그라프에 의한 리올리지 특성은 ACAMS와 ACNMS를 첨가했을 때, 무첨가 밀가루에 비해 수분 흡수력은 증가하였으나 반죽의 안정도는 감소하였고, 그 차이는 ACNMS 첨가 밀가루에서 가장 컸다. RVA에 의한 호화개시온도는 ACNMS 첨가 밀가루에서 가장 컸으며 ACAMS, 무첨가 밀가루순이였으나 최고점도는 ACNMS 첨가 밀가루가 가장 낮았다. 국수의 조리후 중량 및 부피증가는 조리시간 5분까지는 저항전분의 첨가에 대한 영향을 받지 않았으나, 조리시간이 증가함에 따른 변화정도는 무첨가 국수에서 가장 컸고, ACAMS, ACNMS 첨가순이었다. 조리한 국수의 견고성은 저항전분 형성전분이 첨가된 국수에서 높게 나타났으며, 응집성은 무첨가 국수와 ACAMS 첨가국수에서 큰 차이를 보였으나 ACNMS의 응집성과 다른 두가지 국수사이에서 유의적인 차이는 없었다. 조리한 국수의 관능검사 결과 ACNMS 첨가 밀가루가 무첨가 밀가루에 비해 탄력성은 낮았으나, 부드러움성은 높았다.

• Journal of Dairy Science and Biotechnology
• /
• 제30권2호
• /
• pp.93-109
• /
• 2012

This study was performed to investigate the effects of added whey protein concentrates (WPC) and whey powder (WP) on the quality and shelf life of Tofu, a traditional food in Korea. Combined whey powder and whey protein concentrates were obtained at drainage after the casein was separated by using rennet enzyme or acidification of milk. We manufactured whey Tofu and evaluated its nutritional quality by testing, the general composition for yield, moisture, pH, crude protein, crude fat, carbohydrate, rheology, sensory properties, and change during storage. 1. The general compositions of WPC and WP were as follows: (a) WPC: moisture, 5.9%; crude protein, 56.2%; crude fat, 0.1%; carbohydrate, 32.6%; ash, 5.2%; and pH 5.93 and (b) WP: moisture, 3.7%; crude protein, 13.2%; crude fat, 1.6%; carbohydrate, 74.4%; ash, 7.1%; and pH, 6.65. 2. The yield of Tofu was as follows: (a) in WPC, the content was $CaCl_2$:GDL=6:4 > $CaCl_2$:GDL=9:1 > $CaCl_2$:GDL=7:3 > $CaCl_2$:GDL=8:2 and (b) in WP, 2% addition was the highest (265%) at $13.3g/cm^2$, but with 4% addition WP was the lowest (184%) at $22.2g/cm^2$. 3. The moisture content of Tofu was as follows: (a) in WPC, the content was $CaCl_2$:GDL = 6:4 > $CaCl_2$:GDL=9:1 > $CaCl_2$:GDL=7:3 > $CaCl_2$:GDL=8:2 and (b) in WP, 2% addition was the highest at 79.82% ($13.3g/cm^2$), but 4% was the lowest at 75.18% ($22.2g/cm^2$). 4. The pH of Tofu was as follows: (a) in WPC, the value was WPC 6% > WPC 4% > WPC 2% > control and $CaCl_2$:GDL=6:4 > $CaCl_2$:GDL=8:2 > $CaCl_2$:GDL=9:1 > $CaCl_2$:GDL=7:3 and (b) in WP, WP 4% > WP 2% > control. 5. The ash content of Tofu was as follows: (a) in WPC, the content was $CaCl_2$:GDL=8:2 > $CaCl_2$:GDL=7:3 > $CaCl_2$:GDL=6:4 > $CaCl_2$:GDL=9:1 and (b) in WP, there was no difference between 2% and 4% addition. 6. The crude protein content of Tofu was as follows: (a) in WPC, the content was $CaCl_2$:GDL=8:2 > $CaCl_2$:GDL=7:3 > $CaCl_2$:GDL=9:1 > $CaCl_2$:GDL=6:4 and (b) in WP, there was no difference between 2% and 4% addition. 7. The crude fat content of Tofu was as follows: (a) in WPC, the content was $CaCl_2$:GDL=8:2 > $CaCl_2$:GDL=7:3 > $CaCl_2$:GDL=9:1 > $CaCl_2$:GDL=6:4 and (b) in WP, values decreased with increasing pressed weight. 8. The carbohydrate content of Tofu was as follows: (a) in WPC, the content was $CaCl_2$:GDL=8:2 > $CaCl_2$:GDL=7:3 > $CaCl_2$:GDL=6:4 > $CaCl_2$:GDL=9:1 and (b) in WP, values increased with increasing pressed weight. 9. The rheology test results of Tofu were as follows: (a) in WPC, hardness and brittleness was highest with $CaCl_2$:GDL=8:2 and 6% added WPC. Cohesiveness was highest with $CaCl_2$:GDL=6:4 and 2% added WPC. Elasticity was the highest with $CaCl_2$:GDL=7:3 and the added WPC control. (b) in WP, hardness was the highest with $22.2g/cm^2$ and added WP control. Cohesiveness was the highest with $17.8g/cm^2$ and added WP 2%. Elasticity was the highest with $17.8g/cm^2$ and added WP 4%. Brittleness was the highest with $17.8g/cm^2$ and added WP control. 10. The sensory test results of Tofu were as follows: (a) in WPC, the texture, flavor, color, and smell were the highest with $CaCl_2$:GDL=6:4 and 6% added WPC. (b) in WP, the texture was the highest in the control with $22.2g/cm^2$. Flavor and smell were the highest in WP 2% and $22.2g/cm^2$. Color was the highest in WP 2% and $17.8g/cm^2$. 11. The quality change of Tofu during storage was as follows: (a) in WPC, after 60 h, all samples began to get spoiled and their color changed, and mold began to germinate. (b) in WP, the result was similar, but the rate of spoilage was more rapid than that in the control.

• 한국식품영양학회지
• /
• 제14권6호
• /
• pp.585-590
• /
• 2001

구황식품으로 이용되었으며 약리효과가 있는 질경이를 식품으로 이용하기 위하여 질경이를 분말화하여 소맥분에 첨가한 다음 물성변화를 알아보고 식빵을 제조하여 분말 질경이 첨가가 제방적성에 미치는 영향을 조사하였다. 초기 호화온도는 질경이 분말 1%이하 첨가하였을 경우 차이가 크지 않았지만 1.2%에서는 70.05$^{\circ}C$로 호화온도가 크게 높아졌으며 치고 점도와 최종 점도는 질경이 분말 첨가량이 증가할수록 높아졌다. Alveogram에서 반죽의 변형에 필요한 압력인 P값은 질경이 분말 함량이 많을수록 높아졌으며 L값과 G값은 그 반대 경향을 보였다. Farinogram에서 consistency와 흡수율은 질경이 분말 첨가량이 많아질수록 높아졌으며 반죽의 발전시간과 안정도는 점차 낮아지는 모습을 보였다. 빵의 부드러움을 측정하기 위하여 rheometer를 사용한 결과는 식빵제조 후 1일 째에는 Max. G값과 hardness가 증가하였지만 질경이 분말을 0.3~0.9%사용한 경우 3, 6일이 지난 후에 Control에 비하여 낮은 값을 보였는데 이는 질경이 분말의 보습력 때문으로 여겨진다. 관능검사 결과는 질경이 분말 0.6% 사용한 것이 96점으로 가장 좋은 평가를 받았다.

• 한국추진공학회지
• /
• 제13권5호
• /
• pp.1-6
• /
• 2009

로켓시스템의 에너지원으로 적용할 수 있는 기체발생기용 복합 고체추진제의 개발과정을 기술한다. 80%의 고체입자 부하율과 양호한 유동성, 그리고 $-50^{\circ}{\sim}70^{\circ}C$에서 경화에 적절한 추진제 물성을 갖는 HTPB를 바인더로 하여, 낮은 화염온도, 적은 고체입자 잔사, 무독성 생성물의 추진제 제조가 가능한 AN을 제1종 산화제로, 탄도특성 제어에 필요한 AP를 제2종 산화제로 추진제 주요 조성이 구성된다. 기본조성을 근거로 하여 일련의 물성개선 시험이 수행되었으며 최대응력 8 bar 및 최대응력점 변형율 30%, 그리고 탄성계수 1000 psi 수준의 물성을 갖는 추진제 조성을 얻을 수 있었다.

• 한국식품조리과학회지
• /
• 제21권5호
• /
• pp.647-654
• /
• 2005

This study was conducted to investigate the quality characteristics of Jeung-Pyun prepared with the addition of ultrafiltered(UF) sunmul powder. Jeung-Pyun was prepared with five different levels of UF powder(0%, 0.5%, 1%, 2% and 3%) and the physico-chemical properties were examined. The pH of Jeung-Pyun batters decreased from $4.57{\sim}5.69$ to $4.38{\sim}5.03$ during 4 hours of fermentation at $35^{\circ}C$. The weight of Jeung-Pyun decreased, whereas the volume increased, with increasing UF powder content. Total isoflavone content was $0.41{\sim}2.39\;mg%$ before cooking and increased to $0.77 {\sim}3.80\;mg%$ after cooking. The increase of aglycones was particularly observed after cooking. The incorporation of UF powder in Jeung-Pyun lowered the lightness values but increased the redness and yellowness values. Rheology test showed that hardness was decreased with increasing UF powder amount. The values of gumminess and brittleness were the highest in the control group and decreased with increasing UF powder amount. Scanning electron microscope showed that the size of the air cells decreased with increasing UF powder levels. The results of sensory evaluation showed that there were no significant differences in scores of sweetness and moistness among the samples. Therefore, Jeung-Pyun prepared with UF to 3% addition of UF powder was considered to be as acceptable as Jeung-Pyun prepared without UF power.