• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.3
• /
• pp.9-17
• /
• 2003

In this paper, thermo-mechanical and rheological properties of NCPs (Non-Conductive Pastes) depending on silica filler contents and diluent contents were investigated. And then, thermal cycling (T/C) reliability of flip chip assembly using selected NCPs was verified. As the silica filler content increased, thermo-mechanical properties of NCPs were changed. The higher the silica filler content was added, glass transition temperature ($T_g$) and storage modulus at room temperature became higher. While, coefficient of thermal expansion (CTE) decreased. On the other hand, rheological properties of NCPs were significantly affected by diluent content. As the diluent content increased, viscosity of NCP decreased and thixotropic index increased. However, the addition of diluent deteriorated thermo-mechanical properties such as modulus, CTE, and $T_g$. Based on these results, three candidates of NCPs with various silica filler and diluent contents were selected as adhesives for reliability test of flip chip assemblies. T/C reliability test was performed by measuring changes of NCP bump connection resistance. Results showed that flip chip assembly using NCP with lower CTE and higher modulus exhibited better T/C reliability behavior because of reduced shear strain in NCP adhesive layer.

• Journal of the Korean Magnetics Society
• /
• v.8 no.3
• /
• pp.150-155
• /
• 1998

The purpose of this study is to investigate the variations of rheological and magnetic properties with powder loading in plastic anisotropic ferrite magnets. The measured relative viscosities with powder loading were compared with the calculated ones. The variation of relative viscosities with powder loading was in good agreement with that of particle alignment. Remanent flux density and maximum energy product increased linearly with the increase of powder loading, and then showed maximum values. The decrease of magnetic properties at high powder loading was caused by rapid decrease of particle alignment due to the drastic increase of mixture viscosity. The powder loading for maximum magnetic properties is dependent on magnetic field during injection molding and melt viscosity of binder, so the binder with low melt viscosity is necessary to fabricate the magnet with high properties.

• The Korean Journal of Rheology
• /
• v.11 no.2
• /
• pp.135-142
• /
• 1999

The effects of 1 wt.% N-benzylpyrazinium hexafluoroantimonate (BPH) as a thermal latent initiator and blend compositions composed of 0, 5, 10, 20 and 40 wt.% of phenol-novolac resin to epoxy resin were investigated in terms of cure kinetics, thermal stabilities and rheological properties. Thermal latent properties of BPH were measured from the conversion as a function of reaction temperature on a dynamic DSC. This cationic BPH system turned out to be an effective thermal latent initiator in the epoxy-phenol curing system. And the increase of phenol-novolac resin concentration led to the decrease in the latent temperature and to the increase of cure activation energy ($E_a$) of the blend system. The thermal stability and activation energy ($E_t$) for decomposition, gel-time and activation energy ($E_c$) for cross-linking from rheometer increased within the composition range of 20~40 wt.% of phenol-novolac resin. This implies that the three-dimensional cross-linking may take place among hydroxyl group within phenol resin, epoxide ring within epoxy resin and BPH.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.7
• /
• pp.1230-1236
• /
• 2004

This study was conducted to investigate the changes in physical properties of the Neungee (Sarcodon aspratus) during dehydration and rehydration. The drying of the sample was completed within 4 hours at 5$0^{\circ}C$ with the air velocity of 1.5 m/s. The reduction in the thickness of the sample were two-fold compared with those in the surface area of the sample. During the drying period, the values of compression distance, break down, deformation rate, distortion, alleviation rate and softness decreased, whereas the values of hardness and alleviation time increased. However, the values of surrender were not changed. The color of the sample during the drying was changed to black with decreased L, a, and b values. The rehydration rate increased rapidly during first 60 min and remained constant after that. The recovery ratio after rehydration of the dried sample was about 30％ and the rheological properties recovered about 44％.

• Composites Research
• /
• v.15 no.6
• /
• pp.8-15
• /
• 2002

In this work, the effect of biodegradable poly(butylene succinate)(PBS) in difunctional epoxy(21:P) resin was investigated in terms of rheological properties, cure kinetics, thermal stabilities, and mechanical interfacial properties. Rheological properties of the blend system were measured under isothermal condition using a rheometer. Cross-linking activation energies($\textrm{E}_c$) were determined from the Arrhenius equation based on gel time and curing temperature. The $\textrm{E}_c$ was increased in the presence of 10 wt% PBS as compared with neat 2EP. From the DSC results of the blends, the cure activation energies($\textrm{E}_a$) showed a similar behavior with $\textrm{E}_c$ due to the increased intermolecular interaction between 2EP and PBS. The decomposed activation energies($\textrm{E}_t$) for the thermal stability derived from the integral method of Horowitz-Metzger equation, were also increased in 10 wt% PBS. In addition, 20 wt% PBS showed the highest critical stress intensity factor($\textrm{E}_{IC}$). which was explained by increasing the fracture toughness of the 2EP/PBS blend systems.

• Polymer(Korea)
• /
• v.38 no.2
• /
• pp.225-231
• /
• 2014

The rheological properties of highly concentrated polymer bonded explosive simulant were studied by using poly(ethylene-co-vinyl acetate) with 30 and 60% vinyl acetate (VA) content as a binder, respectively. Calcium carbonate and Dechlorane, whose physical properties are similar to resarch department explosive (RDX)'s, were used as fillers. The suspensions were mixed in a batch melt mixer and it was possible to fill 75 v% at maximum. From dynamic mechanical analysis, Dechlorane showed higher interaction with binder resins than that with calcium carbonate fillers. The effects of microstructural change on the rheological properties of the suspensions were investigated by a plate-plate rheometer with constant shear rate and constant shear stress modes, respectively. The theoretical maximum packing fraction of EVA31/Dechlorane suspension obtained from Krieger-Dougherty equation was 70 v% and it was thought that 2000 Pa was proper shear stress condition for this melt processing.

• Korea-Australia Rheology Journal
• /
• v.13 no.4
• /
• pp.169-177
• /
• 2001

Morphological, thermal, rheological, and mechanical properties of reactive compatabilized blends of poly(butylene terephthalate) (PBT) and Polyamide-6 (PA) containing EGMA copolymer were investigated using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), advanced rheometric expansion system (ARES), and universal testing machine (UTM). From the results of thermal analysis by DSC, the melting point of the 30/70 PBT-PA blend was broadened after EGMA was added in the blends, since the enthalpy of melting of the PBT-PA somewhat decreased with the increase of EGMA content. From this result, it is suggested that the EGMA affected to the crystallization behavior and crystallinity of the PBT-PA blends. From SEM micrographs of the 70/30, 50/50, and 30/70 PBT-PA blends, the droplet size of the 30/70 PBT-PA blend was about 0.8 ${\mu}{\textrm}{m}$ which was smaller than that of the 50/50 and 70/30 PBT-PA blends. The complex viscosity of the 30/70 PBT-PA blend observed to be higher than that of the 50/50 and 70/30 PBT-PA blends. From the results of the morphology and rheological properties for the PBT-PA blends, it is suggested that the compatibility is increased in the 30/70 PBT-PA blend than the 50/50 and 70/30 PBT-PA blends. From the results of mechanical properties, it was found that the tensile strength of the 30/70 PBT-PA blend increased with the increase of EGMA up to 2 phr, while tensile strength of the blend in which EGMA content was higher than 2 phr decreased with the increase of EGMA content. From the results of morphological, thermal, rheological, and mechanical properties for the PBT-PA-EGMA blends, it is suggested that the EGMA could be used as a compatibilization role in the blends.

• Korea-Australia Rheology Journal
• /
• v.19 no.3
• /
• pp.125-131
• /
• 2007

Biodegradable polymeric blends are expected to be widely used by industry due to their environmental friendliness and comparable mechanical and thermal properties. Poly (lactic acid) (PLA) and poly (butylene succinate) (PBS) are such biodegradable polymers which aim to replace commodity polymers in future applications. Since cost and brittleness of PLA is quite high, it is not economically feasible to use it alone for day to day use as a packaging material without blending. In this study, blends of PLA and PBS with various compositions were prepared by using a laboratory-scale twin-screw extruder at $180^{\circ}C$. Morphological, thermal, rheological and mechanical properties were investigated on the samples obtained by compression molding to explore suitability of these compositions for packaging applications. Morphology of the blends was investigated by scanning electron microscopy (SEM). Morphology showed a clear phase difference trend depending on blend composition. Modulated differential scanning calorimetry (MDSC) thermograms of the blends indicated that the glass transition temperature ($T_g$) of PLA did not change much with the addition of PBS, but analysis showed that for PLA/PBS blend of up to 80/20 composition there is partial miscibility between the two polymers. The tensile strength and modulus were measured by the Instron Universal Testing Machine. Tensile strength, modulus and percentage (%) elongation at break of the blends decreased with PBS content. However, tensile strength and modulus values of PLA/PBS blend for up to 80/20 composition nearly follow the mixing rule. Rheological results also show miscibility between the two polymers for PBS composition less than 20% by weight. PBS reduced the brittleness of PLA, thus making it a contender to replace plastics for packaging applications. This work found a partial miscibility between PBS and PLA by investigating thermal, mechanical and morphological properties.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.168-176
• /
• 2001

The effect of novel N-crotyl-N,N-dimethyl-4-methylanilinium hexafluoroantimonate (CMH) curing agent as a thermal latent initiator on thermal behaviors, rheological properties, and thermal stability of diglycidylether of bisphenol A (DGEBA) epoxy cationic system was investigated. From DSC measurements of DGEBA/CMH system, it was shown that this system exhibits an excellent thermal latent characteristic at a given temperature. The conversion and conversion rate of DGEBA/CMH system increased with increasing the concentration of initiator, due to high activity of CMH. Rheological properties of the system were investigated under isothermal condition using a rheometer The gelation time was obtained from the analysis of storage modulus (G'), loss modulus (G"), and damping factor (tan $\delta$). As a result, the reduction of gelation time was affected by high curing temperature and concentration of CMH, resulting in high degree of network formation in cationic polymerization, due to difference of activity. The thermal stability of the cured epoxy resin was discussed in terms of the activation energy for decomposition and thermal factors determined from TGA measurements.ents.

• Macromolecular Research
• /
• v.16 no.1
• /
• pp.6-14
• /
• 2008

Polypropylene (PP)-layered silicate nanocomposites were developed using a new processing method involving a supercritical carbon dioxide ($scCO_2$)-assisted co-rotating twin-screw extrusion process. The nanocomposites were prepared through two step extrusion processes. In the first step, the PP/clay mixture was extruded with $CO_2$ injected into the barrel of the extruder and the resulting foamed extrudate was cooled and pelletized. In the second step, the foamed extrudate was extruded with venting to produce the final PP/clay nanocomposites without $CO_2$. In this study, organophilic-clay and polypropylene matrix were used. Maleic anhydride grafted polypropylene (PP-g-MA) was used as a compatibilizer. This study focused on the effect of $scCO_2$ on the dispersion characteristics of the clays into a PP matrix and the rheological properties of the layered silicate based PP nanocomposites. The dispersion properties of clays in the nanocomposites as well as the rheological properties of the nanocomposites were examined as a function of the PP-g-MA concentration. The degree of dispersion of the clays in the nanocomposites was analyzed by X-ray diffraction and transmission electron microscope. Various rheological properties of the nanocomposites were measured using a rotational rheometer. In the experimental results, the $scCO_2$ assisted continuous manufacturing extrusion system was used to successfully produce the organophilic-clay filled PP nanocomposites. It was found that $scCO_2$ had a measurable effect on the clay dispersion in the polymer matrix and the melt intercalation of a polymer into clay layers.