• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.920-924
• /
• 2002

This paper presents the reverse design of a cam mechanism using NURBS(Nonuniform Rational B-spline curve). Cam is very difficult to make the accurate shape on the design and the manufacture. Because the cam shape is commonly made in order to move in special functions. The reverse design can be used to check accuracy between the designed data and the manufactured data of the cam shape and also reproduce the cam without the design data. The reverse design procedures consist of motion analysis and curve fitting. The motion analysis is used the central difference method and the relative velocity method to find the displacement and velocity. The curve fitting is used NURBS to develope the whole curve. The central difference method is derived in the 3 dimensional space.

• PNF and Movement
• /
• 제7권2호
• /
• pp.1-10
• /
• 2009

This research measures the conditions of spinal scoliosis of college students and analyses the factors that affect spinal scoliosis. From September 15, 2008 to October 30, 2008, the study was conducted with 142 C College students and measured the degrees of spinal scoliosis. The analysis was evaluated according to the Pneumex Analysis program. The collected data was compiled into statistics using the SPSS PC+ 12.0 program. The results were as follows: 1. It appeared that in the cases of C curve, reverse C curve, S curve, and the normal, there was a statistical significance(p=.010) between the conditions of spinal scoliosis of the two genders. 2. It appeared that the comparison among the three groups according to the characteristics of the subjects showed a statistical significance in spinal length(p=.000) in the C curve group, age(p=.019) and spinal length(p=.004) in the reverse C curve group, and spinal length (p=.035), difference in apparent leg length(p=.019), and difference in true leg length(p=.012) in the S curve group. 3. It appeared that in the normal group without spinal scoliosis, the results of comparing the differences in apparent true leg length and spinal length according to the characteristics of the subjects showed a statistical significance in spinal length and gender(p=.000), age (p=.008), height(p=.000), and whether or not there was a regular exercise over once per week(p=.001). 4. On the correlations between C curve, reverse C curve, and S curve and differences in apparent true leg length and spinal length, it appeared that: (a) As the difference in apparent leg length gets bigger the difference in true leg length gets big in C curve(r=.551, p=.000). (b) As the difference in apparent leg length gets bigger the difference in true leg length gets big in reverse C curve(r=.511, p=.006). (c) There is no correlation in S curve.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.426-429
• /
• 2001

Many various products are manufactured which have sculptured surfaces recently. Constructing surface of these models is required technique called reverse engineering. In reverse engineering, a product which has sculptured surfaces is measured and we create surface model to acquire complete model data of object. Measured point data needs preprocess and sampling. Next a set of point data in a plane fit section curve. At last, surface is generated by fitting to section curves. Here we uses sweep surface. Sweep surface is compatible fitting CAD model to drawing. This paper discusses converting approximation of NURBS surface as a standard surface.

• 한국자동차공학회논문집
• /
• 제22권6호
• /
• pp.31-38
• /
• 2014

The purpose of this study is to make virtual machine using a 3D modeller to perform reverse engineering. Through the intuitive designer's ability, approximated model of the object is created and used to extract the data and NC tool path. The extracted data make approximated curve by using NURBS curve fitting. And the curve is used to remodel. From these series of process, the final reverse engineering data of the objects can be obtained. Two conclusions are drawn from this study. First, initial deviation of the intuitive model is one of the important factors that determine the number of repetitions of the experiment. Due to the characteristic of intuitive curve, after a certain number of repetitions the average deviation increase and radiate rather than decrease.

• 한국CDE학회논문집
• /
• 제4권2호
• /
• pp.127-138
• /
• 1999

For reverse engineering, curves and surfaces are modeled for new products by interpolating the digitized data points. But there are many measuring or deviation errors. Therefore, it is important to handle errors during the curve or surface modeling. If the errors are ignored, designer could get undesirable results. For this reason, fairing procedure with the aesthetics criteria is necessary in computer modeling. This paper presents methods of 3D NURBS curve fairing. The techniques are based on automatic repositioning of the digitized dat points or the NURBS curve control points by a constrained nonlinear optimization algorithm. The objective function is derived variously by derived curved. Constraints are distance measures between the original and the modified digitized data points. Changes I curve shape are analyzed by illustrations of curve shapes, and continuous plotting of curvature and torsion.

• 대한치과교정학회지
• /
• 제51권3호
• /
• pp.179-188
• /
• 2021

Objective: To evaluate the overall treatment effects in terms of the amount of uprighting with changes in the sagittal and vertical positions of mandibular molars after applying an orthodontic miniplate with a nickel-titanium (NiTi) reverse curve arch wire (biocreative reverse curve [BRC] system). Methods: A total of 30 female patients (mean age, 25.99 ± 8.96 years) were treated with the BRC system (mean BRC time, 10.3 ± 4.07 months). An I-shaped C-tube miniplate (Jin Biomed) was placed at the labial aspect for the alveolar bone of the mandibular incisors. A 0.017 × 0.025-inch NiTi reverse curve arch wire was engaged at the C-tube mini-plate anteriorly and the first and second premolars and molars posteriorly in the mandibular arch. Pre- and post-BRC lateral cephalograms were analyzed. A paired t-test was used to analyze the treatment effects of BRC. Results: The mandibular second molars were intrusively uprighted successfully by the BRC system. Distal uprighting with a controlled vertical dimension was noted on the first molars when they remained engaged in the BRC and the distal ends of the arch wire were laid on the second molars. The mandibular first and second premolars showed a slight extrusion. The changes in the mandibular incisors were unremarkable, while the mandibular molar angulation improved significantly. The lower occlusal plane rotated counterclockwise (MP-LOP: 1.13° ± 2.60°). Conclusions: The BRC system can provide very effective molar uprighting without compromising the position of the mandibular anterior teeth.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.230-234
• /
• 1997

Reverse engineering involves digitizing a three-dimensional model or part converting the data to a CAD database description and manufacturing by CNC. Currently, the digitization is done through measurements taken manually by a CMM or touch probe mounted on a CNC machinetool. Some reverse engineering techniques require close integration between the data collection method and the surface-fitting algorithms. Accurate surface data are collected by input to the surface fitting method. This study has been found that both the smoothness of surfaces and accuracy of surface fitting are related with the degree of the interpolated surfaces.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.96-101
• /
• 1998

J-R curve tests were performed on 1T compact specimens of SA516 Gr. 70 carbon steels under reverse cyclic loading. A Direct-Current Potential Drop (DCPD) method, one of the nondestructive techniques to detect flaw of structure, is being increasingly used for monitoring crack initiation and stable crack growth in typical fracture mechanics specimens for J-R testing. In many aspects this method is simpler than the unloading compliance method. The objective of this paper is to evaluate the J-R Curve according to the crack length measurement techniques under reverse cyclic loading. In order to prove the reliability and repeatability of the DCPD method, the crack length measured by using DCPD method was compared to one determined from unloading compliance. Consequently, this DCPD method correlated well with J-R curves and crack extension measurements determined from unloading compliance method.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권4호
• /
• pp.15-23
• /
• 2002

With the development of a laser scanner of high precision and increased speed, reverse engineering becomes a key approach to reduce the time for the development of new products. But the modeling process is not so automated enough until now. Modeling in real workshops is usually performed by the experienced operators and it requires a skillful technique to get the resultant surface of high quality and precision. In this paper, a systematic solution is proposed to automate the free-form surface generation from the measured point data. Compatibility is imposed to the measured point data during input curve generation. And the compatibility of cross-sectional curve is also considered for the loft surface generation. The data in each step is produced in IGES file format to make an easy interface to other CAD/CAM software without any further data manipulation.

• 한국정밀공학회지
• /
• 제16권5호통권98호
• /
• pp.160-168
• /
• 1999

This paper describes one method of reverse engineering that machines a free form shape without descriptive model. A portable five-axes 3D CMM was used to digitize point data from physical model. After approximation by rational B-spline curve from digitized point data of a geometric shape, a surface was constructed by the skinning method of the cross-sectional design technique. Since a surface patch was segmented by fifteen part, surface merging was also implemented to assure the surface boundary continuity. Finally, composite surface was transferred to commercial CAD/CAM system through IFES translation in order to machine the modeled geometric shape.