• Membrane and Water Treatment
• /
• 제10권2호
• /
• pp.179-189
• /
• 2019

This study aimed to investigate the effect of temperature and solid retention time (SRT) on membrane fouling in a membrane bioreactors (MBRs). For this purpose, a lab-scale submerged MBR system was used. This system operated at two SRTs of 15 and 5 days, three various temperatures (20, 25 and $30^{\circ}C$) and hydraulic retention time (HRT) of 8 h. The results indicated that decreased the cake layer resistance and increased particles size of foulant due to increasing temperature and SRT. Fourier transform infrared (FTIR) analysis show that the cake layer formed on the membrane surface, contained high levels of proteins and especially polysaccharides in extracellular polymeric substances (EPS) but absorbance intensity of EPS functional groups decreased with temperature and SRT. EEM analysis showed that the peak on the range of Ex/Em=220-240/350-400 in SRT of 15 and temperature of $30^{\circ}C$ indicates the presence of fulvic acid in the cake. In addition, as the temperature rise from 20 to $30^{\circ}C$, concentration of soluble microbial products (SMP) increased and COD removal reached 89%. Furthermore, the rate of membrane fouling was found to increase with decreasing temperature and SRT.

• 펄프종이기술
• /
• 제31권5호
• /
• pp.24-30
• /
• 1999

Crosslinked corn starches were prepared to increase their molecular weights and their performance as a component of Compozil system was evaluated and compared with that of potato starches. It was shown that greater improvements in retention and strength properties could be achieved when crosslinded cationic corn starches rather than conventional cationic potato starches were used especially at high conductivity because of their molecular rigidity.

• 펄프종이기술
• /
• 제32권1호
• /
• pp.26-32
• /
• 2000

The impact of major surface chemical properties of silica sols on the retention and drainage performance of the silica based micrparticle system, Compozil was investigated using four different silica sols. And the effect of silica properties on the interactions with cationic starch and cationic plyacrylamide has also been identified. The surface charge density and the stability over pH of silica sols were increased by introducing aluminosilicate anions at surface. It was found that the charge density of silica sols determined the addition level necessary to attain the maximum retention and drainage. When silica sols were combined with cationic starch, the change density of the product was the critical properties and the degree of microagregation was of minor importance. In the cationic polyacrylamide system the degree of colloid structure appeared to be a more critcial property than the charge density of silica sols.

• 대한인간공학회지
• /
• 제9권1호
• /
• pp.15-20
• /
• 1990

In order to design man-machine system, communication system and other tasks that require information, we need to understand the characteristics of hyman short-term memory (STM). Thus, the purpose of this thesis is to investigate the influences of information stress and retention time on human performances and their relation- ships for STM of visual invormation. Eight subjects performed the computer monitering with STM task. The results showed that performance on serial recall from STM get wores and response time (and completion time) on information transmission by recall from STM increase as information stress and retention time increase. Also, there existed inverse proportional relationship between recall performance and response time (and completion time).

• Bulletin of the Korean Chemical Society
• /
• 제21권1호
• /
• pp.105-109
• /
• 2000

High-performance liquid chromatography is suitable for getting thermodynamic information about solute-solvent interactions. We used a squalane impregnated $C_{18}$ phase as a presumably bulk-like stationary phase to secure a simple partition mechanism for solute retention in reversed phase liquid chromatographic system. We measured retention data of some selected solutes (benzene, toluene, ethylbenzene, propylbenzene, butylbenzene, phenol, benzylalcohol, phenethylalcohol, benzylacetone, acetophenone, benzonitrile, benzylcyanide) at 25, 30, 35, 40, 45, and 50 $^{\circ}C$ in 30/70, 40/60, 50/50, 60/40 and 70/30 (v/v%) acetonitrile/water eluents. The van't Hoff plots were nicely linear, thus we calculated dependable thermodynamic values such as enthalpies and entropies of solute transfer from the mobile phase to the stationary phase based on more than four retention measurements on different days (or weeks). We found that the cavity formation effect was the major factor in solute distribution between the mobile and stationary phases in the system studied here. Our data were com-pared with some relevant literature data.

• Membrane and Water Treatment
• /
• 제9권5호
• /
• pp.343-351
• /
• 2018

As membrane fouling is based on various factors, it is a complex phenomenon that is hard to estimate. This study investigated membrane fouling in a thermophilic jet loop membrane bioreactor (JLMBR). With this purpose, four different empirical membrane fouling models with different sludge retention times were applied on the flow data obtained in the system. As a result of the model implementation, it was found for all sludge retention times that, standard blocking is effective in the first 1.5 hours of filtration, while cake filtration was dominant in the remaining duration. Additionally, it was observed that as the sludge retention time increases, membrane fouling rate decreases.

• International Journal of Human Ecology
• /
• 제8권2호
• /
• pp.99-106
• /
• 2007

In this study, the mechanical properties related to the fabric appearance of well being functional bamboo knitted fabric before and after loess dyeing were evaluated. The mechanical properties of fabrics were measured by KES-F system, that is, shape retention, draping, wrinkle recovery, compression property, and surface properties, and total hand value of three types of knitted fabric, 100% bamboo, 100% cotton, and bamboo / cotton blend (60 / 40) were evaluated before and after loess dyeing. As a result, it was found that appearance density, shape retention, and drape coefficient of cotton knitted fabric were greater than those of bamboo knitted fabric. After loess dyeing, shape retention and drape coefficient, wrinkle recovery of bamboo knitted fabric improved and WC/C and MMD/SMD decreased. According to THV, the hand of bamboo/cotton blend knit is the best among three samples by compensation the weak properties of the two fiber. Therefore, loess dyeing seemed to be a good method for improving shape retention and hand value of 100% bamboo and bamboo blended fabric.

• 대한치과보철학회지
• /
• 제41권6호
• /
• pp.747-761
• /
• 2003

Statement of problem. The proper materials of attachments for implant retained overdenture are unknown, such as the correlation between retention and abrasion, as well as the types of materials that are suitable for patrix and for matrix individually. Purpose of this study. The aim of this study was to select a proper clinical attachment system for a successful treatment as well as patient satisfaction. Methods. Retention and abrasion of 14 commercial attachments were measured during 15,000 removes. Results. A retentive part (matrix) which requires elasticity has to be made of gold while the patrix part which does not require elasticity has to be made of titanium. This gold matrix / titanium patrix combination showed the most retentive force and the least retention loss.

• 펄프종이기술
• /
• 제42권5호
• /
• pp.24-30
• /
• 2010

Papermaking technology has drastically improved over the last 20 years to face new challenges. Because environmental regulations have become increasingly strict, papermaking systems have had to accommodate elevated recycled pulp content and an increased use of recycled process water. Process water in papermaking systems has become more dirtier and reduced polymer efficiency. Amphoteric PAM demonstrated a higher degree of stability in a high conductivity environment compared to cationic PAM. This was illustrated by the improved retention performance, particularly the ash retention. This amphoteric polymer can be used for board or newsprint production using recycled pulp, especially for the systems where polymer dissolving water is high in conductivity and degradation of cationic functional groups of cationic PAM can occur.

• 한국콘텐츠학회논문지
• /
• 제13권12호
• /
• pp.974-985
• /
• 2013

본 연구는 중소기업 R&D인력의 현황과 문제점 분석을 통해서 R&D인력의 확보 유지 방안 제시를 목적으로 수행되었다. 연구방법으로는 문헌조사 및 현황 조사, 국내외 R&D인력 지원제도 벤치마킹, 인적자본 기업패널 고용자료 분석, 사례조사 등을 사용하였다. 이를 통해, 직무별 R&D 인력의 현황, 중소기업을 중심으로 기업규모별 HRM 관행에 대한 만족도 및 문제점, 핵심인재관리 및 인재관리체제 현황, R&D 인력관리체계의 애로사항 등을 분석하고 R&D인력에 대한 인재관리 중심의 확보 유지를 위한 정책방안을 제시하였다. 결과 기본영역과 세부영역의 정책을 제언하고 주된 대안은 R&D인력 관리체계, R&D인력에 대한 경력개발 프로그램, 그리고 우수한 중소기업의 홍보와 R&D인재 프로모션의 국가적 지원 등이다. 중소기업 자체로도 인사관리제도에 대한 인식개선과 활용제고의 노력이 요구되었다.