• 한국환경복원기술학회지
• /
• 제9권3호
• /
• pp.1-16
• /
• 2006

The purpose of this study is to develop design model of ecological park as stormwater storage facilities. The results are as follows : First, the design model of ecological park as stormwater storage facilities consider ecological and landscape characteristics such as high efficiency of land use, function as disaster prevention, ecological water purification, formation of habitat for flora and fauna. Second, this study demonstrates two types of plane structure and eight types of designed section. They can be combined and designed depending on conditions of each site. The facilities of stormwater storage conduct disaster prevention system and ecological park. Retention pond in stormwater storage facilities for ecological park also should be made for ecological restoration in the site. Third, the ecological park provide the basis for ecological network from in-site to out-site. Therefore its conservation and restoration plan consider the ecosystems of the site. Fourth, the most important factor for maintenance and management for retention pond is keeping water quality. Sustainable Structured wetland Biotop system is suggested for ecological water purification system in the retention pond which is one of the constructed wetland system using multi-celled aquatic plant and pond. This system can also provide habitat for animals and plants, water friendly park for men, and beautiful landscape.

• 펄프종이기술
• /
• 제40권3호
• /
• pp.1-8
• /
• 2008

The efficiency of retention systems including compozil-G, hydrocol, compozil-S, and micropolymer under highly closed papermaking system was evaluated using contaminated white waters prepared in the laboratory. Compozil-G and compozil-S performed better in retention than hydrocol and micropolymer systems. This suggested that stronger hydrogen bonding between fiber and guar gum or starch was formed to give stronger flocculation and better retention. Especially compozil-G outperformed compozil-S in retention, and this indicated the presence of stronger interaction between guar and cellulose fibers probably due to their similarity in chemical structure. Two compozil retention systems decreased the cationic demand and COD more effectively than hydrocol and microparticle systems. In particular, compozil-G that uses guar gum was highly effective in decreasing anionic trashes at low dosage.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.495-499
• /
• 2008

본 연구는 빗물 저장조 시스템의 유출량 변화모의를 통해 지붕면 유출제어의 가능성을 확인하고, 설계조건에 적절한 저장조(retention tank)-펌프 용량 조합의 결정방안을 제시하였다. 저장조의 운전조건을 고려한 물수지 방정식을 이용해 서울지역의 강우특성에 따른 저류량 및 첨두유출유량 변화를 모의하고, 그 결과를 강우재현기간별 저장조 용량-첨두 유출량-펌프 배수량 관계곡선 (TPP 곡선) 으로 작성하였다. 100년 빈도 첨두 유출을 지선 하수관로의 설계기준인 5년 빈도 첨두유출까지 제어할 경우, 지붕면적 $100m^2$ 당 펌프배수 용량은 $0{\sim}25{\ell}$/분, 저장조 용량은 $8.5{\sim}10m^3$으로 결정되었다. 즉, 서울지역의 지붕면적 $100m^2$ 당 적절한 저장조+펌프 용량조합은 $10m^3+0{\ell}$/분${\sim}8.5m^3+25{\ell}$/분이라고 할 수 있다. TPP 곡선을 이용하여 설계조건에 적절한 빗물 저장조-펌프의 용량조합 방안을 알 수 있었으며, 이를 이용해 현장여건에 고려한 구체적인 용량을 결정할 수 있을 것이다.

• 대한치과보철학회지
• /
• 제45권5호
• /
• pp.665-674
• /
• 2007

Purpose: The purpose of this study was to investigate the effect of sire and shape of retention element on the bond strength of indirect composite resin and metal. Material and method: The metal disk specimens, each 6mm in diameter, were cast from CrCo alloy. They were divided into 8 groups by applied retention element. retention bead group $B2\;({\phi}\;0.2mm),\;B4\;({\phi}\;0.4mm),\;B6\;({\phi}\;0.6mm),\;B8\;({\phi}\;0.8mm)$, retention crystal group C2 (0.2mm), C5 (0.5mm), C8 (0.8mm) and sandblasting group SB ($110{\mu}m\;Al_2O_3$ blasting) as control. Eighty-eight metal specimens were veneered with $TESCERA^{(R)}$ Indirect resin system. One specimen of each group was sectioned and the resin-metal bonding pattern at the interface was observed under measuring microscope. Other specimens were then tested for tensile bond strength on an Instron universal testing machine at a crosshead speed of 2mm/min. Results: 1. Compared to sandblasting, beads or crystals increased the resin-metal bond strength (P<.05). 2. 0.2mm retention crystals were most effective in improving the resin-metal bond strength (P>.05). 3. 0.2mm beads showed the highest bond strength among retention bead groups, but there was no statistically significant difference (P>.05). 4. Retention crystals tend to be higher in bond strength than retention beads due to wider surface area. 5. The larger retention element, the larger the undercut for the mechanical retention, but the gap at resin-metal interface was also increased. Conclusion: Within the limitations of this study, 0.2mm retention crystals were most effective in improving the resin-metal bond strength.

• 한국산학기술학회논문지
• /
• 제20권2호
• /
• pp.434-442
• /
• 2019

도시 내 빈번히 발생하는 홍수 피해를 해결하기 위한 대응 방안으로 자연상태의 수문순환 체계를 회복하기 위한 저영향개발(Low Impact Development, LID) 기법이 대두되고 있다. LID 요소기술 중 하나인 생태저류지는 유역에서 발생하는 유출수를 저류 및 침투하여 우수 유출수 및 비점오염물질 저감효과를 갖는 시설로 다양한 연구가 진행되고 있으나, 유출저감효과에 대한 분석은 미흡한 실정이다. 따라서 본 연구에서는 수문 해석이 가능한 K-LIDM을 이용하여 소규모유역에서 생태저류지의 유출 저감효과를 분석하였다. 시나리오를 구성함에 있어 생태저류지의 저류용량을 증가시키거나 유역과 생태저류지를 분할하였고 확률강우량을 활용하여 단기강우를 모의하였다. 분석결과 저류용량 증가에 따라 20%, 분산형 시스템에서 5~15% 이상의 유출 저감효과를 나타냈으며 향후 생태저류지의 저류깊이, 지반의 침투능 및 유출부의 직경과 높이 등 다양한 시나리오에 대한 연구가 수행된다면 생태저류지의 물순환 효율성에 관하여 보다 정량적인 분석이 가능할 것으로 기대된다.

• 대한치과보철학회지
• /
• 제36권4호
• /
• pp.566-580
• /
• 1998

Implant-supported overdenture is known as a useful appliance, instead of using the conventional complete denture, for better retention and stability. In this study 4 types of materials such as, gold bar/plastic clip(group AuP), gold bar/metal clip(group AuM), palladium bar/plastic clip(group PdP), and palladium bar/metal clip (group PdM) were used to evaluate the retention forces according the type of clips and alloys used for bar fabrication, in the Hader bar system. Repeated insertions and removals of overdenture were conducted in each group. and the retention forces were measured and compared the data of each group according to the number of insertion and removal. The obtained results were as follows, 1. In the comparison of retention forces according to type of bar-clip, retention was increased in the order of group AuM, PdM, PdP AuP. and the retention force of group AuM was significantly increased compared with those of others (p<0.05). 2. In the comparison of retention forces according to the number of insertion, only group PdP showed significant decrease in retention(p<0.05). 3. In the comparison of retention forces according to the type of bar and clip. there was no significant difference in the type of bar, but the retention of plastic clip was significantly higher than that of metal clip when Au bar was used(p<0.05). 4. In the observation of the bar surface, group AuM using Au bar and metal clip showed the most scratches among bar groups.

• The Journal of Advanced Prosthodontics
• /
• 제7권4호
• /
• pp.323-328
• /
• 2015

PURPOSE. This in-vitro study was designed to evaluate retention forces, microleakage and plastic deformation of a prefabricated 2-implant bar attachment system (SFI-Bar, Cendres+$M{\acute{e}}taux$, Switzerland). MATERIALS AND METHODS. Two SFI implant-adapters were torqued with 35 Ncm into two implant analogues. Before the tube bars were finally sealed, the inner cavity of the tube bar was filled with liquid red dye to evaluate microleakage. As tube bar sealing agents three different materials were used (AGC Cem (AGC, resin based), Cervitec Plus (CP; varnish) and Gapseal (GS; silicone based). Four groups with eight specimens each were tested (GS, GS+AGC, AGC, CP). For cyclic loading, the attachment system was assembled parallel to the female counterparts in a chewing simulator. The mean retention forces of the initial and final ten cycles were statistically evaluated (ANOVA, ${\alpha}{\leq}.05$). RESULTS. All groups showed a significant loss of retention forces. Their means differed between 30-39 N initially and 22-28 N after 50,000 loading cycles. No significant statistical differences could be found between the groups at the beginning (P=.224), at the end (P=.257) or between the loss of retention forces (P=.288). Microleakage occurred initially only in some groups but after 10,000 loading cycles all groups exhibited microleakage. CONCLUSION. Long-term retention forces of the SFI-Bar remained above 20 N which can be considered clinically sufficient. The sealing agents in this study are not suitable to prevent microleakage.

• 한국문헌정보학회지
• /
• 제49권3호
• /
• pp.437-456
• /
• 2015

본 연구의 목적은 선행연구에서 밝혀진 자동서고의 자료 수장 효율을 다른 유형의 서고와 비교 분석하는데 있다. 국내외의 대학도서관은 장서 증가에 따라 자료 수장 효율을 높이기 위한 방안으로 자동서고시스템을 도입하였다. 선행연구에 의하면 자동서고는 개가제 서고나 고정서가형 및 이동서가형 보존서고보다 자료 수장 효율이 높다. 본 연구는 우리나라 S대학교도서관 자동서고의 자료 수장량을 개가제 서고와 가상의 고정서가 형 및 이동서가형 보존서고의 수장량과 비교하였다. 조사결과 자동서고는 개가제 서고보다 최대 6배, 고정서가형 보존서고보다 최대 3.61배 그리고 이동서가형 보존서고보다 최대 1.45배 높은 것으로 나타나, 선행연구에서 밝혀진 것보다는 자료 수장 효율이 낮았다.

• 동력기계공학회지
• /
• 제20권2호
• /
• pp.43-50
• /
• 2016

This research proposal is based on a novel non-contact technique of micro-sized bead injection process for fabrication of electronic paper display. This non-contact injection process is based on the principle of electrostatic force and uses micro-sized metal-coated beads dispersed in a solution. The dispersion retention times of three different solutions with viscosities of 10 cps, 100 cps, and 1000 cps were measured by optical equipment showing the retention times of 5 mins, 10 mins, and 30 mins respectively. The dispersion retention rate dropped as the time passed. The dispersion retention characteristic of 1000 cps solution was more stable as compared to those of 10 cps and 100 cps meaning that higher viscosity has better retention properties. The experimental results of bead injection at different viscosity levels of the solution were also measured and a stable injection result was achieved by using 1000 cps solution. This results show that stable injection is dependent on solution viscosity and dispersion.

• 펄프종이기술
• /
• 제40권5호
• /
• pp.1-10
• /
• 2008

Synthetic mineral microparticles (SMM) is a patented system which has been developed to promote drainage of water and retention of fine particles during papermaking. It is shown in patents that the SMM system can have advantages in both of drainage and retention, compared with montmorillonite (bentonite), which is one of the most popular materials presently used in this kind of application. Turbidity and gravity drainage time were measured using a Britt-Jar test with representative SMM formulations, in order to confirm the efficacy of SMM covering a wide range of compositions and discover effects of some key variables that have the potential to lead to unexpected advantages in terms of the effectiveness of the microparticles, when used in combination with a cationic polyacrylamide treatment of papermaking furnish. An iron silicate showed highest retention performance, as well as suitably fast drainage time relative to other metal silicate and bentonite. Zinc silicate improved retention and drainage. SMM synthesized from aluminum sulfate ($Al_2(SO_4){_3}$) did not show a benefit in retention and drainage, relative to bentonite. SMM synthesized from aluminum chloride ($AlCl_3$) performed better in drainage and retention than bentonite when the Al/Si ratios were 0.76 and 1.00. It was found that when the Al/Si ratio and neutralization are considered, pH variation due to the change of Al/Si ratio can be a key factor to control the size of primary metal silicate particles and the degree of coagulation of the primary particles.