• Journal of Radiation Protection and Research
• /
• v.39 no.2
• /
• pp.109-117
• /
• 2014

Nuclear emergency planning is to plan sheltering, evacuation and iodine prophylaxis for the residents living in the area where the emergency plan is needed, the area is confirmed based on the dose assessment using the source-term through an accident analysis and the data measured from meteorological tower. In this study, the does change before and after protective measures was assessed stochastically based on the one year meteorological data in the condition of the maximum hypothetical accident which can be considered at the research reactor 'HANARO', and the optimized protective measures were derived based on the reference levels defined as a residual dose by ICRP 2007 recommendation which can be applied in a emergency exposure situation. The optimized protective measures for the HANARO in the maximum hypothetical accident were the evacuation to radius 300 m, the sheltering from 300 m to 800 m, the iodine prophylaxis only for the emergency workers under the protective measures for non emergency workers.

• Tuberculosis and Respiratory Diseases
• /
• v.78 no.1
• /
• pp.1-7
• /
• 2015

Background: The incidence of tuberculosis (TB) in Korea is relatively high compared to the other Organisation for Economic Co-operation and Development (OECD) countries, with a prevalence of 71 per 100,000 in 2012, although the incidence is declining. Real-time polymerase chain reaction (PCR) has been introduced for the rapid diagnosis of TB. Recently, its advantage lies in higher sensitivity and specificity for the diagnosis of TB. This study evaluated the clinical accuracy of real-time PCR using respiratory specimens in a clinical setting. Methods: Real-time PCR assays using sputum specimens and/or bronchoscopic aspirates from 2,877 subjects were reviewed retrospectively; 2,859 subjects were enrolled. The diagnosis of TB was determined by positive microbiology, pathological findings of TB in the lung and pleura, or clinical suspicion of active TB following anti-TB medication for more than 6 months with a favorable response. Results: Sensitivity, specificity, and accuracy were 44%, 99%, and 86% from sputum, and 65%, 97%, and 87% from bronchoscopic aspirates, respectively. For overall respiratory specimens, sensitivity was 59%, specificity was 98%, and accuracy increased to 89%. Conclusion: Positivity in real-time PCR using any respiratory specimens suggests the possibility of active TB in clinically suspected cases, guiding to start anti-TB medication. Real-time PCR from selective bronchoscopic aspirates enhances the diagnostic yield much more when added to sputum examination.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.6
• /
• pp.499-512
• /
• 2016

The boundary reaction method(BRM) is a substructure time domain method, it removes global iterations between frequency and time domain analyses commonly required in the hybrid approaches, so that it operates as a two-step uncoupled method. The BRM offers a two-step method as follows: (1) the calculation of boundary reaction forces in the frequency domain on an interface of linear and nonlinear regions, (2) solving the wave radiation problem subjected to the boundary reaction forces in the time domain. In the time domain analysis, the near-field soil is modeled to simulate the wave radiation problem. This paper evaluates the performance of the BRM according to modeling extent of near-field soil for the nonlinear SSI analysis of base-isolated NPP structure. For this purpose, parametric studies are performed using equivalent linear SSI problems. The accuracy of the BRM solution is evaluated by comparing the BRM solution with that of conventional SSI seismic technique. The numerical results show that the soil condition affects the modeling range of near-field soil for the BRM analysis as well as the size of the basemat. Finally, the BRM is applied for the nonlinear SSI analysis of a base-isolated NPP structure to demonstrate the accuracy and effectiveness of the method.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.1
• /
• pp.37-51
• /
• 2009

The nuclear power industry in the world has recognized the importance of integrating non-technical and team skills training with the technical training given to its control room operators to reduce human errors since the Three Mile Island and Chernobyl accidents. The Nuclear power plant (NPP) industry in Korea has been also making efforts to reduce the human errors which largely have contributed to 120 nuclear reactor trips from the year 2001 to 2006. The Crew Resource Management (CRM) training was one of the efforts to reduce the human errors in the nuclear power industry. The CRM was developed as a response to new insights into the causes of aircraft accidents which followed from the introduction of flight recorders and cockpit voice recorders into modern jet aircraft. The CRM first became widely used in the commercial airline industry, but military aviation, shipboard crews, medical and surgical teams, offshore oil crews, and other high-consequence, high-risk, time-critical industry teams soon followed. This study aims to develop a CRM training program that helps to improve plant performance by reducing the number of reactor trips caused by the operators' errors in Korean NPP. The program is; firstly, based on the work we conducted to develop a human factors training from the applications to the Nuclear Power Plant; secondly, based on a number of guidelines from the current practicable literature; thirdly, focused on team skills, such as leadership, situational awareness, teamwork, and communication, which have been widely known to be critical for improving the operational performance and reducing human errors in Korean NPPs; lastly, similar to the event-based training approach that many researchers have applied in other domains: aircraft, medical operations, railroads, and offshore oilrigs. We conducted an experiment to test effectiveness of the CRM training program in a condition of simulated control room also. We found that the program made the operators' attitudes and behaviors be improved positively from the experimental results. The more implications of the finding were discussed further in detail.

• Journal of Digital Contents Society
• /
• v.19 no.2
• /
• pp.251-257
• /
• 2018

The purpose of this study is to analyze the satisfaction and requirements of users' devices after development of tablet based AAC(Augmentative and Alternatice Communication) application for Android. The purpose of this study is to evaluate the satisfaction and the requirement of tablet - based AAC application, Were assessed using the Korea Assistive Technology Assessment Tool (KAAT). As a result of satisfaction evaluation of tablet-based smart AAC device, all the items including device, service, and everyday life showed positive response satisfying from 5 point scale to more than 4 point scale. However, it was relatively low in the items of effectiveness, manipulation and convenience. Some of the improvements in the application include the enlargement of the symbol sound and the simplicity of symbol editing. The results of the study suggest that continual updates of m Smart AAC applications, the simplicity of symbolic editing, application usage and training should be improved. The satisfaction evaluation results of this study and the feedback of potential users will be the guidelines for improving and complementing the functions of existing smart AAC devices.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.3 s.55
• /
• pp.53-62
• /
• 2007

This paper presents a new vibration control method for long-span bridges using complex damper system. The new system presents simple mechanical configuration with oil and elasto-plastic dampers which have velocity and displacement dependency in vibration energy absorbing. This system can produce various damping forces according to the applied external forces by the velocity and displacement-dependent characteristics of the dampers. The oil damper dissipates vibration energy for relatively frequent and small amplitude like in the case for small to moderate earthquakes, whereas the elasto-plastic damper system works for rare and large amplitude vibration such as high seismic excitation. Thus, the proposed system exhibits the advantage of low cost with high performance since the roles of the two different dampers are effectively separated. A numerical model is established for the complex damper system, and the response characteristics and effectiveness of the proposed system are presented through numerical simulations. Numerical results show that the proposed complex damper system can significantly improve the seismic performance of long-span bridge structures with much more effective damping mechanism than single conventional passive damper systems.

• Korean Journal of Environmental Agriculture
• /
• v.6 no.2
• /
• pp.94-100
• /
• 1987

Plant mitochondria, irradiated with blue-colored $sunlight(350{\sim}500nm)$ under aerobic and anaerobic conditions, were assayed as to the electron transfer activity of respiratory enzyme system, and compared with those irradiated with orange-colored light(white sunlight minus blue-colored light). The respiratory activity of mitochondria was most seriousely inhibited by illumination with blue-colored light under aerobic condition. Deaeration of mitochondrial suspension resulted in substantial decrease of the photoinhibition by blue-colored light. Meanwhile, orange-colored light demonstrated much less effectiveness-almost ineffectiveness-in causing the inhibition of mitochondrial respiration system. The results of enzymatic assay revealed a strong possibility that FMN in NDH and heme group at least in cytochrome c oxidase, but not FAD in SDH, are the photodynamic sensitizers in mitochondrial inner membrane. Also worthwhile to note is the significant difference from the others of SDH in its photoinhibitory response to the light quality of visible light; that the inhibition of SDH by irradiation was not affected by atmospheric condition and that orange-colored light gave rise to considerable extents of inhibition to the enzyme. This observation was tentatively interpreted in terms of photosensitized reaction not involving molecular oxygen possibly catalyzed by Fe-S centers in the enzyme. The superoxide production and the membrane peroxidation of mitochondria under various treatments also indicated that there was blue-light photodynamic reaction in mitochondria involving active oxygens.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.1
• /
• pp.132-138
• /
• 2015

Trees, cultivated in containers, are appropriate in soil deformation such as road sites with cutting and filling. This study tested the effectiveness of trees produced in containers for early rootage in street tree transplantation. For the study, Korean Mountain Ashes(Sorbus alnifolia) were used for experimental groups. The groups were categorized into three categories: trees cultivated in containers with mulching treatment(group A), trees cultivated outdoors with mulching treatment (group B), and trees cultivated in containers with weeding treatment(group C). Each group consisted of ten trees of the same size and transplanted to the experimental site. In order to compare each group's rootage, the study was carried out with the chlorophyll fluorescence method by the analysis of photochemical reaction. As a result of the study, group B had the lowest the maximum fluorescence amount(P). The amount of fluorescence increased by OJ transition of the process, and appeared to reduce the photosystem II electron transport efficiency. In photosystem II, electron transfer energy flux through photosystem I(RE1o/RC, RE1o/CS) was also reduced by more than 20% in group B. These results may imply that transplantation of container-cultivated trees with mulching treatment provides the most rapid rootage among the groups. The weeding treatment is also more effective than mulching treatment for rapid rootage of street trees.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.55-62
• /
• 2005

Recently, the opening of the world economy and regional ization of national demand endless endeavors and investments to upbring design-industry for regional economic development. Our domestic commodities, declined in price competitiveness against China and Southeast Asian nations, need construction of brand image of commodities and consumers' response through expanded concernments in marketing spheres. The design-industry is a important means to strengthen competitiveness of the domestic industry through discrimination of commodities and creativity of high added value. Design-industry has some problems in circumstances; commodity development and marketing are below the level in the sphere of manufacture industry yet and businessmen are unwilling to invest demanded for development of new design. Establishment of the personal foundation, useful for accumulating competent designers' experiences and technologies, can not pass limit. In addition, a system and a policy to protect design-industry have a problem in effectiveness. Concrete strategies to activate design industry which meets social and cultural circumstances of Daegu and Gyeongbuk region are to establish policy for construction of specialists' infra, systematization of study & development of design, common ownership of information on design, and expansion of design company. The business to upbring design in the region should be operated to develop competitive commodities which is helpful to the regional economy and to increase value of the regional enterprises' brand. In addition, foundation of design should be expanded personal, material, and informational infra through design-centered so that they are helpful to activate economy of Daegu and Gyeongbuk through making design reformational cluster.

• Journal of the Society of Disaster Information
• /
• v.14 no.3
• /
• pp.288-295
• /
• 2018

Purpose: The paper aims to compare the effectiveness of the two types of transport demand management measures, namely pull measures and push measures. Method: Case studies of two metropolitan areas in the developing world assess the extent to which increases in fuel prices can contribute to reducing automobile use and increasing the public transport use and the potential of urban rail transit to cause mode shift from automobiles. Within the case studies, a stated response survey of current car users has been conducted for Cairo and an on-line survey of rail transit users in Algiers. Results: There was a major proportion of car drivers who intend to switch to public transport, depending on the range of fuel prices in Cairo and a considerable proportion of rail users who have switched from automobiles resulting in a measurable reduction in CO2 emissions in Algiers. Conclusion: Investments in urban rail can be highly effective where there are demands for better public transport, but this type of pull measures can be much more effective if combined with push measures which significantly raise driving costs.