• 대한전자공학회논문지
• /
• 제27권5호
• /
• pp.737-746
• /
• 1990

Ga0.47In0.53As PIN photodiodes(PD) having various areas have been fabricated by liquid phase epitaxial techniques. Ternary melt has been baked out at 675\ulcorner in H2 atmosphere for 20 hours before growth, which resulted in reduction of background carrier concentration of grown epi-layer. Also, lattice mismatch has been controlled within 0.01%. The room temperature performance of 10**-4cm\ulcornerarea PIN PD at a bias voltage of -5V were` quantum efficiency(with no antireflection coating)=60% for 1.3\ulcorner light source, dark current\ulcorner5nA, and capacitance\ulcornerpE. Frequency response measurement of packaged PIN PD has shown that cut-off frequency (f-3dB) was 961MHz. This PD has shown a good eye pattern when it was incorporated in a 565Mbps optical receiver.

• 제어로봇시스템학회논문지
• /
• 제20권7호
• /
• pp.695-700
• /
• 2014

In this paper, we utilize the CMG's momentum bias to control the roll/pitch attitude of the Quad-rotor. While the previous control approaches have used the thrust control approach, we design and add a new momentum controller (using CMG) in order to improve the transient response over the existing methods. The focal point of this paper is the design of a controller for a Quad-rotor's attitude using CMG. This leads to other tasks such as an identification of the model's parameters and mathematical nonlinear modeling. Then, the previous thrust controller is designed based on the linearized model. Finally, the overall system with our designed controller is implemented and tested in real time to show that the Quad-rotor is kept in a good balanced position faster than the traditional thrust-only control approach.

• Nuclear Medicine and Molecular Imaging
• /
• 제42권2호
• /
• pp.112-117
• /
• 2008

Artifact corrections including normalization and attenuation correction were important for quantitative analysis in Nuclear Medicine Imaging. Normalization is the process of ensuring that all lines of response joining detectors in coincidence have the same effective sensitivity. Failure to account for variations in LOR sensitivity leads to bias and high-frequency artifacts in the reconstructed images. Attenuation correction is the process of the correction of attenuation phenomenon lies in the natural property that photons emitted by the radiopharmaceutical will interact with tissue and other materials as they pass through the body. In this paper, we will review the several approaches for normalization and attenuation correction strategies.

• Smart Structures and Systems
• /
• 제14권4호
• /
• pp.541-558
• /
• 2014

This paper proposes a new design of shape memory alloy (SMA) wire actuated gripper for open mode operation. SMA can generate smooth muscle movements during actuation which make them potentially good contenders in designing grippers. The principle of the shape memory alloy gripper is to convert the linear displacement of the SMA wire actuator into the angular displacement of the gripping jaw. Steady state analysis is performed to design the wire diameter of the bias spring for a known SMA wire. The gripper is designed to open about an angle of $22.5^{\circ}$ when actuated using pulsating electric current from a constant current source. The safe operating power range of the gripper is determined and verified theoretically. Experimental evaluation for the uncontrolled gripper showed a rotation of $19.97^{\circ}$. Forced cooling techniques were employed to speed up the cooling process. The gripper is simple and robust in design (single movable jaw), easy to fabricate, low cost, and exhibits wide handling capabilities like longer object handling time and handling wide sizes of objects with minimum utilization of power since power is required only to grasp and release operations.

• 센서학회지
• /
• 제16권3호
• /
• pp.174-178
• /
• 2007

This paper presents a novel, highly sensitive condenser microphone with a flexure hinge diaphragm. We used the finite-element analysis (FEA) to evaluate the mechanical and acoustic performance of the condenser microphone with a hinge diaphragm. And we fabricated the miniature condenser microphones with area of 1.5 mm${\times}$1.5 mm. From the simulation results, we confirmed that the maximum displacements at the center of flexure hinge diaphragms are several hundred times, compared with flat diaphragms. The sensitivities of fabricated miniature microphones are about $12.87{\mu}V/Pa$ at 1 kHz under a low bias voltage of 1 V, and the frequency response is flat upto 13 kHz.

• 한국전자파학회논문지
• /
• 제9권6호
• /
• pp.843-849
• /
• 1998

24GHz 대역의 WLL 시스템용 전압제어발진기(Yca)를 설계하고 제작하였다. 위상잡음(C/N) 특성을 개선하기 위하여 품질계수가 높은 유전체 공진기를 공진부의 인덕터로 사용하였다. 5 V, 10 mA 바이어스 조건 에서 VCO를 측정한 결과 2210-2240 MHz의 주파수 대역에서 출력은 0 dBm, 위상잡음 특성은 10 kHz offset에서 100 dBc/Hz으로 매우 우수한 특성을 나타내었다. 따라서 제작된 VCO는 WLL 시스템에 적용할 수 있다고 생각된다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.321-324
• /
• 2001

MOSFET는 전력감소, 도핑농도 증가, 캐리어 속도 증가를 위해서 많은 변화를 가져왔다. 이러한 변화를 받아들이기 위해서, 채널의 길이와 공급전압이 감소해야만했으며, 그것으로 인해 소자가 더욱 작아지게 되었다. 본 논문에서는 이러한 변화를 두 가지의 시뮬레이터를 사용하여 비교 분석하였다. 사용되어진 시뮬레이터는 Micro-Tec과 ISE-TCAD이며, 본 논문에서 LDD(lightly-doped drain) MOSFET에 관하여 시뮬레이션 하였다. 게이트 길이는 180nm를 기준으로 MOSFET의 특성과 전계를 비교 분석하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.137-140
• /
• 2002

The frequency response analysis of complex impedance spectra using small perturbation ac impedance spectroscopy is an informative method of OLED performance characterization and lifetime analysis. Using simple RC equivalent circuit mode,l macroscopic nonliniear transport properties of semiconductive emission/transport layers can be analyzed and parameterized. We present the bias voltage dependence and aging effect in impedance spectra measured from an ITO/CuPC/TPD/$Alq_3$/LiF/Al OLED device, and discuss possible failure mechanism based on impedance model parameters.

• International Journal of Fluid Machinery and Systems
• /
• 제10권3호
• /
• pp.197-208
• /
• 2017

When Francis turbines operate at partial load, residual swirl in the draft tube causes low-frequency pulsation of pressure and power output. Scale effects and system response may bias the prediction of prototype behavior based on laboratory tests, but could be overcome by means of a 1D analytical model. This paper deals with the two most important features of such a model, the compliance and the source of excitation. In a distributed-parameter version, compliance should be represented as an exponential function of local pressure. Lack of similarity due to different Froude number can thus be compensated. The normally unknown gas content in the vortex cavity has significant influence on the pulsation, and should therefore be measured and considered as a test parameter.

• Communications for Statistical Applications and Methods
• /
• 제16권6호
• /
• pp.1031-1036
• /
• 2009

Under recent dramatic declines in response rates, various procedures have been considered among survey practitioners to reduce nonresponse in order to avoid its potential impairment to the inference. In the random digit dialing telephone surveys, substantial efforts are often required to obtain the initial contact for the screener interview. To reduce a burden with higher data collection costs, refusal conversion can be administered only to a random portion of the sample, reducing nonresponse (bias) with an expense of sample variability increment due to the associated weight adjustment. In this paper, we provide ways to determine the optimal subsampling rate using a linear cost model. Our approach for refusal subsampling is to predetermine a random portion from the full sample and to apply refusal conversion efforts if needed only to the subsample.