• 자원리싸이클링
• /
• 제28권6호
• /
• pp.87-95
• /
• 2019

본 연구에서는 인쇄회로기판(PCB) 제조 공정 중 발생한 슬러지 내 구리를 회수하기 위한 건식야금 공정 변수에 대해 조사하였다. 에칭 및 도금 공정에서 발생한 슬러지는 전처리 공정을 통해 수분과 유기물을 제거하였다. 열역학 상평형 계산을 통해 평형상과 슬래그 시스템을 선정하였으며, 유가금속 회수율에 미치는 건식야금 공정 변수에 대하여 조사하였다.

• 자원리싸이클링
• /
• 제26권5호
• /
• pp.85-96
• /
• 2017

본 연구에서는 PCB 도금 및 에칭 공정 중 발생한 슬러지의 분석을 통해 건식환원처리가 가능한 슬래그 시스템을 선정하고자 하였으며 이를 바탕으로 슬러지 내에 존재하는 유가금속의 회수 가능성에 대하여 실험적 및 열역학적 검토를 하였다. 슬러지는 $100{\sim}500^{\circ}C$의 온도구간에서 건조한 후 슬러지의 형상과 화학성분 및 상을 분석하였다. 슬러지의 건식환원처리 가능성은 FactSage를 이용한 열역학적 계산을 통해 조사하였다.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 1993년도 EARTH 발표논문초록
• /
• pp.16-16
• /
• 1993

• 자원환경지질
• /
• 제38권4호
• /
• pp.411-419
• /
• 2005

최근 중국 경제의 급속한 신장은 우리에게 큰 관심사항 중 하나이다. 중국은 13억이란 인구와 함께 풍부한 자원, 방대한 영토를 보유하고 있을 뿐 아니라 기초 기술력도 비교적 탄탄하여 동북아시대를 준비하는 우리나라에게 중국 경제의 성장은 매우 심도 있게 연구하여야 할 과제이다. 특히, 중국은 자원이 풍부할 뿐 아니라 산업의 기본이 되는 자원관련 기술도 발달하였는데 중국 경제 성장 속에는 강서 동업집단공사, 호남 주야화거 금속주식유한공사 등 거대한 자원관련 기업들의 성장이 큰 역할을 하고 있음을 볼 수 있다.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2006년도 춘계임시총회 및 제27회 학술발표대회
• /
• pp.78-85
• /
• 2006

In textile industries, waste effluent containing zinc is generated during the manufacture of rayon yarn from the wood pulp or cotton linters. Due to the strict environmental regulations and the presence of toxic metallic and other constituents, the discharge of industrial effluents in the sewage or disposal of solid sludge as landfill is restricted. Before recycling of zinc as zinc sulphate solution to the spinning-bath of the rayon manufacturing plant the zinc sulphate solution must be free from calcium, which is deleterious to the process as gypsum precipitates with the increase in concentration and forms scale in the bath. In the present work an attempt has been made to develop a process following solvent extraction technique using thiophosphinic extractants, Cyanex 272 and 302 modified with isodecanol and diluted in kerosene to recover zinc from rayon effluent. Various process parameters viz. extraction of zinc from different concentration of solution, distribution ratio, selective extraction, O/A ratio on extraction and stripping from the loaded organic, complex formation in the organic phase etc. have been studied to see the feasibility of the process. The extractant Cyanex 302 has been found selective for the recovery of 99.99% of zinc from the effluent above equilibrium pH 3.4 maintaining the O/A ratio of 1/30 leaving all the calcium in the raffinate. It selectively extracted zinc in the form of complex $[R_{2}Zn.3RH]_{org}$ and retained all the calcium in the aqueous raffinate. The zinc from the loaded Cyanex 302 can be stripped with 10% sulphuric acid at even O/A ratio of 10 without affecting the stripping efficiency. The stripped solution thus obtained could be recycled in the spinning bath of the rayon plant. The raffinate obtained after the recovery of zinc could be disposed safely without affacting environment.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권1호
• /
• pp.17-21
• /
• 2017

Vanadium slags is a kind of vanadiferous solid waste from steelmaking process. It not only occupies land, pollutes environment, but also leads to waste of resources. Based on the difference of magnetic susceptibility of different particles caused by their chemical and physical properties from vanadium slag, a new technology, superconducting high gradient magnetic separation was investigated for separation and extraction of valuable substances from vanadium slag. The magnetic concentrate was obtained under optimal parameters, i.e., a particle size -200 mesh, a magnetic flux density of 0.8 T, a slurry concentration of 5 g/L, an amount of steel wools of 25 g and a slurry flow velocity of 2 L/min. The content of $Fe_2O_3$ in concentrate could be increased from 39.6% to 55.0% and $V_2O_5$ from 2.5% to 4.0%, respectively. The recovery rate is up to 42.9%, and the vanadium slag has been effectively reused.

• Geosystem Engineering
• /
• 제21권5호
• /
• pp.273-281
• /
• 2018

In this study, the activated red mud was used as a new and appropriate adsorbent for the removal of ferrocyanide and ferricyanide from aqueous solution. Predicting the removal percentage and adsorption capacity of ferro-ferricyanide by activated red mud during the adsorption process is necessary which has been done by modeling and simulation. The artificial neural network (ANN) was used to develop new models for the predictions. A back propagation algorithm model was trained to develop a predictive model. The effective variables including pH, absorbent amount, absorbent type, ionic strength, stirring rate, time, adsorbate type, and adsorbate dosage were considered as inputs of the models. The correlation coefficient value ($R^2$) and root mean square error (RMSE) values of the testing data for the removal percentage and adsorption capacity using ANN models were 0.8560, 12.5667, 0.9329, and 10.8117, respectively. The results showed that the proposed ANN models can be used to predict the removal percentage and adsorption capacity of activated red mud for the removal of ferrocyanide and ferricyanide with reasonable error.

• 한국결정성장학회지
• /
• 제21권1호
• /
• pp.6-14
• /
• 2011

이수석고 상태로 존재하는 인산부생석고를 ${\beta}$형 반수석고가 되도록 탈수한 다음 급격히 수화시켜 석고성분 만을 미립의 침상결정이 되도록 하여 불순물과 분리하는 공정과 여기서 회수된 침상의 이수석고 슬러리에 무수황산나트륨 ($Na_2SO_4$)을 첨가하여 용해시키고 적당한 조건에서 탈수와 결정성장 조작을 행하여 고순도 이수석고 결정을 회수하는 공정을 제안하였다. 본 고에서는 상온에서의 미립 이수석고의 결정성장속도, 전체 공정 단계별 수용액 내 $Ca^{2+}$의 농도 변화, 결정질 석고의 입도와 회수율에 미치는 수중탈수 시간, 결정성장 온도, 강온속도의 영향에 대하여 조사하였다.

• Korean Chemical Engineering Research
• /
• 제53권2호
• /
• pp.137-144
• /
• 2015

The present paper deals with the extractive separation and selective recovery of nickel and lithium from the sulfate leachate of cathode scrap generated during the manufacture of LIBs. The conditions for extraction, scrubbing and stripping of nickel from lithium were optimized with an aqueous feed containing $2.54kg{\cdot}m^{-3}$ Ni and $4.82kg{\cdot}m^{-3}$ Li using PC-88A. Over 99.6% nickel was extracted with $0.15kmol{\cdot}m^{-3}$ PC-88A in two counter-current stages at O/A=1 and pH=6.5. Effective scrubbing Li from loaded organic was systematically studied with a dilute $Na_2CO_3$ solution ($0.10kmol{\cdot}m^{-3}$). The McCabe-Thiele diagram suggests two counter-current scrubbing stages are required at O/A=2/3 to yield lithium-scrubbing efficiency of 99.6%. The proposed process showed advantages of simplicity, and high purity (99.9%) nickel sulfate recovery along with lithium to ensure the complete recycling of the waste from LIBs manufacturing process.

• Corrosion Science and Technology
• /
• 제21권6호
• /
• pp.423-433
• /
• 2022

The objective of this study was to determine whether Cymbopogon citratus extract as a corrosion inhibitor from natural tropical resources could prevent corrosion of carbon steel in sulfuric acid solution. Inhibitory action of this extract was investigated using electrochemical methods such as potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). Those methods revealed corrosion rate, efficiency of inhibition, and adsorptions isotherm values when the extract was added to the sulfuric acid solution at concentration up to 500 ppm with various immersion time at ambient temperature. Results revealed that higher concentration of the extract and longer immersion time decreased the corrosion rate of carbon steel whereas the inhibition efficiency of the extract was increased up to 97.25%. The value of charge transfer resistance was increased significantly by adding the extract at concentration up to 500 ppm with an immersion time of 60 minutes. The type of the extract was a mixed inhibitor. It could inhibit the corrosion process in both anodic and cathodic sides electrochemically. Results of this study suggest that the mechanism of adsorption on the surface of carbon steel is related to Langmuir adsorption isotherm.