• Journal of Animal Science and Technology
• /
• v.60 no.5
• /
• pp.14.1-14.12
• /
• 2018

Background: Sheep production is a major component of the livestock sector in Ethiopia. The country owing to the large population of 30.70 million estimated numbers of sheep in the country and out of which about 72.14% are females, and 27.86% are males with diverse genetic resources. The real value of indigenous breeds was often under-estimated mostly due to their poor appearance and relatively low productivity. Developing countries in most cases opt for exotic breeds to increase animal productivity through crossbreeding or breed substitution without properly investigating the production potential of the indigenous breeds. The main objective of the research was to identify sheep flock composition and structure, farmers' traits of interest and breeding objective of Wollo highland sheep, and their $F_1$ crossbreed progenies. Results: Smallholder farmers' flock synthesized from breeding ewes, breeding rams, pre-weaned ewe lambs, pre-weaned ram lambs, unproductive ewes, castrated and fattened rams, with the percentage coverage of 29.2, 13.3, 15.5, 16.5, 12.4, and 12.5%, respectively. The maximum number of flock size was 289.0 sheep per flock and higher in the third stratum. The off-take rate percentage of the three strata presented as 21.9% in 1st stratum, 12% in the 2nd stratum, and 16.4% in the 3rd stratum and higher off-take rate recorded in the first stratum. Sheep producer's traits of interest ranked by growth rate (first), body size (second) and marketing value was third rank. Communal breeding (random mating), village based controlled breeding, mixed type and private ram controlled breeding practice were comprised of 39.7, 61.7, 52 and 71.3%, respectively. The percentages of ewes per flock composition were presented as 36.5, 27.1 and 25.5%, respectively in the 3rd stratum, 2nd stratum and 3rd stratum in the order of their importance's. Conclusion: Genetic improvement practices at smallholder sheep producers situation was showing promising outcome with indigenous Washera $F_1$ crossbred lambs and which designated for weaning rate, body size, marketing age, age at first lambing, good temperament and large litter size in the order of their rank. The contemporary breeding practice tendency indicated that, reduced flock size to improve flock productivity via crossbreeding practices.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.1
• /
• pp.101-119
• /
• 2018

In this study, we analyzed long-term measurements and air quality simulation results of four criteria air pollutants ($PM_{10}$, $O_3$, $NO_2$, and $SO_2$) for 10 years, from 2006 to 2015, with emphasis on trends of annual variabilities. With the observation data, we conducted spatial interpolation using the Kriging method to estimate spatial distribution of pollutant concentrations. We also performed air quality simulations using the CMAQ model to consider the nonlinearity of the secondary air pollutants such as $O_3$ and the influence of long-range transport. In addition, these simulations are used to deduce the effect of long-term meteorological variations on trends of air quality changes because we fixed the emissions inventory while changing meteorological inputs. The nation-wide inter-annual variability of modeled $PM_{10}$ concentrations was $-0.11{\mu}g/m^3/yr$, while that of observed concentrations was $-0.84{\mu}g/m^3/yr$. For the Seoul Metropolitan Area, the inter-annual variability of observed $PM_{10}$ concentrations was $-1.64{\mu}g/m^3/yr$ that is two times rapid improvement compared to other regions. On the other hand, the inter-annual variability of observed $O_3$ concentrations is 0.62 ppb/yr which is larger than the simulated result of 0.13 ppb/yr. Magnitudes of differences between the modeled and observed inter-annual variabilities indicated that decreasing trend of $PM_{10}$ and increasing trend of $O_3$ are more influenced by emissions and oxidation states than meteorological conditions. We also found similar patterns in $NO_2$. However, $NO_2$ trends showed greater regional and seasonal differences than other pollutants. The analytic approach used in this study can be applicable to estimate changes in factors determining air quality such as emissions, weather, and surrounding conditions over a long term. Then analysis results can be used as important data for air quality management planning and evaluation of the chronic impact of air quality.

• Tunnel and Underground Space
• /
• v.27 no.4
• /
• pp.217-229
• /
• 2017

This study focuses on the improvement of the working environment in domestic collieries where temperature is increasing due to heat of the earth that is caused by the long-term mining. In order to improve the working environment of the mine, a ventilation evaluation was carried out for Hwasoon Mining Industry. In order to increase the ventilation efficiency of the mine, numerical analysis of the effect on temperature was carried out by using climsim, a temperature prediction program. The analysis shows that A coal mine needs $6,152m^3/min$ for in-flow ventilation rate but the total input air flowrate is $4,710m^3/min$, $1,442m^3/min$ of in-flow ventilation rate shortage. The 93 m hypothetical ventilation shaft from -395 ML to -488 ML could result about $3^{\circ}C$ temperature drop in the coal mine of -488 ML far. As a result of predicting the $CO_2$ concentration at -523 ML development using artificial neural network, the emission of $CO_2$ increased as the amount of coal and coal bed thickness increased. The factors that have the greatest effect on the amount of $CO_2$ emissions were coal layer thickness and coal mining. And, as the air quantity increases, it has a great effect on the decrease of carbon dioxide concentration.

• Journal of Korean Society of Rural Planning
• /
• v.19 no.4
• /
• pp.81-93
• /
• 2013

The selection of land for fishing village development project, and the standard used to classify fishing villages has been determined based on the guidelines developed by fishing village cooperatives. The approach fishing village cooperatives follows is likely to classify fishing villages without first reflecting on the overall development environment of the region, such as other industries and workers in the area. It also acts as a barrier for business promotion or evaluation, because the cooperatives do not match the administrative districts, which are the units of administration, and the main policy enforcement agent in regional development. Against this background, this study aimed to identify categories to situate the development direction, as well as the size and distribution of fishing villages based on eup, myeon, and dong administrative units as defined by the Fishing Villages and Fishery Harbors Act. This study was based on the Census of Agriculture, Forestry, and Fisheries of 2010, and analyzed 826 eups, myeon, and dongs with fishery households using the principal component analysis, and 2-Step cluster analysis methods. Therefore, 95% of the variance was explained using the covariance matrix for types of fishing villages, but it was analyzed as one component focusing on the number and ratio of fishery households, and used the cluster-type analysis, which focused on the sizes of fishing villages. The clusters were categorized into three types: (1) the development type based on the number of fishermen in the eups, myeons and dongs was analyzed as village size (682); (2) administrative district size (121); and (3) total eups, myeons and dongs (23), which revealed that the size of most fishing villages was small. We could explain 73% of the variance using the correlation coefficient matrix, which was divided into three types according to the three principal component scores, namely fishery household power, fishery industry power, and fishing village tourism power. Most fishing villages did not have a clear development direction because all business areas within the region were diversified, and 552 regions could be categorized under the harmonious development type, which is in need of balanced development. The fishery industry type typified by industrial strength included 159 regions in need of an approach based on industrialization of fishery product processing. Specialized production areas, which specialized in producing fishery products, were 115 regions with a high percentage of fishermen. The analysis results indicated that various situations in terms of size and development of fishing villages existed. However, because several regions exist in the form of small village units, it was necessary to approach the project in a manner that directed the diversification of regional development projects, such as places for local residents to relax or enjoy tourism experiences within the region, while considering the overall conditions of the relevant eups, myeons, and dongs. Reinforcement of individual support for fishermen based on the Fisheries Act must take precedence over providing support for fishermen through regional development. In addition, it is necessary to approach the development of fishing villages by focusing on industrializing the processing techniques of fishery products. Areas specialized in the production of fishery products are required to consider the facilities for fisheries production, and must make efforts to increase fishery resources, such as releasing fry.

• Journal of Environmental Impact Assessment
• /
• v.27 no.1
• /
• pp.17-32
• /
• 2018

The need for seawater desalination is increasing in terms of securing various water resources, but few studies are available as for the environmental impact of hypersaline concentrated water (brine) discharged from desalination plants. Domestic studies are concentrated mainly on toxicity evaluation that phytoplankton, zooplankton larvae and green algae (Ulva pertusa) are negatively affected by concentrated water. The mortality of Paralichthys olivaceus showed a linear relationship with increasing salinity, and Oryzias latipes died 100% at concentrations above 60 psu. Foreign studies included monitoring cases as well as toxicity evaluations. The number of species decreased around the area where the concentrated water discharged. The hypersaline concentrated water affects the pelagic and benthic organisms. However, the fishes escaped when exposed to salinity, and the pelagic and benthic organisms resistant to salinity survived the hypersaline environment. The salinity limit and distance from the outlet was presented as the regulatory standard for bine discharge. There were differences in regulatory standards among country and seawater desalination plants, and these regulatory standards have been strengthened recently. In particular, California Water Boards were revised to ensure that the maximum daily salinity concentration does not exceed 2 psu above the ambient salinity level within 100 m of the outlet.

• Journal of Science Education
• /
• v.41 no.2
• /
• pp.226-247
• /
• 2017

The purpose of this study is to develop the exhibition model of children's science museum for children and to present the guideline for the exhibition of children's science museum. To this end, we proposed an exhibition of 'body', 'surrounding things', and 'natural phenomenon' as exhibition topics based on the exhibit evaluation framework and kindergarten curriculum. The direction and color elements are important for the exhibition of 'the body', and the presentation of the 'natural phenomenon' is suitable for the use of contextual media applying color and lighting. And it can be said that it is important to provide clues and fixtures for exploring objects based on the theme of 'surrounding objects'. In addition, in order to secure the validity of the developed exhibition model, we developed an exhibition link program for the 'mirror' exhibition of the exhibition model and applied it to visitors to the Gwangju Museum of Science. Therefore, it is meaningful that it provides the basic guidelines for exhibition planning, and it is necessary to plan exhibition to maximize the exhibition effect by directing exhibition contents, exhibition media and exhibition space suitable for the audience.

• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.57-66
• /
• 2007

According to the rapid economic growth and the escalation of recreational tourism activities due to the change of job and working patterns, currently various traffic problems often occur in tourist areas. As tourist traffic, contrary to general traffic, is not regional but rather from outside the area of interest, it is hard to grasp the traffic situation surrounding the tourist area. Furthermore, since the traffic is concentrated during a limited tourist season, it is difficult to examine and solve the problem. In this study, in order to test the feasibility of introducing a traffic transfer system to reduce congestion in tourist areas, the authors considered the differences in traffic congestion between typical and tourist seasons and designed a willingness to pay model. The willingness to pay amount for a shuttle bus fare is assumed as 1,430 Won and 1,650 Won is assumed for a transfer parking charge. These amounts were slightly above the current bus fare in the study area, but many people thought that the introduction of a traffic transfer system would help to relieve the traffic congestion approaching the tourist area and to develop tourism resources. As the willingness to pay appeared high from the persons used in this study, it was indirectly confirmed that the introduction of a traffic transfer system would be a step in the right direction.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.231-237
• /
• 2006

Grease barrier food containers are commonly used for packaging of fast food, cooked food, and food in general. Greaseproofing is also used for certificate paper and label paper etc. Different pulp raw materials, due to their different fiber morphology and chemical compositions, produce papers of varying characteristics. We used optical photomicroscopy and fiber analysis data to evaluate fiber morphology and traits under various beating conditions in order to understand which pulp raw materials produced superior greaseproofing property when a fluorinated greaseproofing agent was added internally. The experiment studied 9 species of pulps, including 2 softwood (northern pine and radiata pine) bleached kraft pulps which were beaten to 550 and 350 mL CSF, respectively; 3 hardwoods (eucalypts, acacia, mixed Indonesian hardwoods) bleached kraft pulps which were beaten to 450 and 250 mL CSF, respectively; and nonwood fibers of reed, bagasse, and abaca. A fluorinated greaseproofing chemical at 0.12% dosage with respect to dry pulp was added to each pulp preparation and formed handsheets. A total of 67 sets of handsheets were prepared, and their basis weights, thickness, bulks, opacities, wet opacities, air resistance, water absorption and degrees of greaseproofing were measured for an overall evaluation of pulp and freeness on greaseproofing papers. The experimental fiber length, coarseness and distribution characteristics and the greaseproofing results suggest that softwood pulps (radiate pine > northern pine) were superior to hardwood pulps (eucalypts > acacia > mixed Indonesian hardwoods). The unbeaten pulps gave papers with high porosities and nearly devoid of greaseproofing property. Greaseproofing is proportional to air resistance. Among the nonwood fibers, bagasse had the best greaseproofing property, followed by reed and abaca was the poorest. With regards to waterproofing property, hardwood pulps (mixed Indonesian hardwoods > acacia > eucalypts) were better than softwood pulps (northern pine > radiate pine). Among the Nonwood fibers, reed had the highest waterproofing property, and it was followed by abaca, while bagasse had the poorest waterproofing characteristic. In summary, bleached kraft northern pine, eucalypts and reed pulps were best suited for making greaseproofing papers, Freeness of the pulps should be kept at $200{\sim}280mL$ CSF for optimal performance.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.1
• /
• pp.39-44
• /
• 2013

In Korea, wide spread use of whole cottonseed, which is primarily a GMO plant imported from foreign countries and being fed to animals as raw state, has aroused concern that it may disturb the existing ecology of the country unless dispersion of the seed is under proper control. The objective of this study was to elucidate the changes in various nutritive parameters due to heat treatment and to determine the effective condition for removing germination ability of whole cottonseed (WCS). Of the various temperatures applied (76, 78, 80, 85, $100^{\circ}C$/30 min) $85^{\circ}C$ for 30 min was confirmed to be the lowest temperature treatment which resulted in a complete removal of the germination ability of WCS. Therefore, based on the determined temperature condition ($85^{\circ}C$ 30 min) we tried to examine the changes of various nutritional parameters, including nutrient composition, in vitro digestibilities and ruminal protein degradabilities, comparing raw whole cotton seed (RWCS) and heated whole cotton seed (HWCS). Some changes in amino acid composition were observed with heat treatment of WCS, but these were regarded to originate from the variation in plant quality and seed morphology, which are usually affected by different environmental factors during the vegetation period. As for fatty acid composition, no significant differences were observed to occur during heat treatment. However, WCS heated at $85^{\circ}C$ for 30 min in a circulating oven showed a significant decrease (p<0.05) of in situ rumen degradability in both dry matter (DM) and crude protein (CP), as compared to raw WCS. Overall results obtained in the study indicate that the heating condition used in this study, which was proven to be the most appropriate and economic to remove germination ability of WCS, may also improve the nutritional value of the ruminant with regard to reducing its protein degradability within the rumen.

• Applied Chemistry for Engineering
• /
• v.25 no.2
• /
• pp.121-133
• /
• 2014

Block copolymers including ABA triblock architectures are useful as thermoplastic elastomers and toughened plastics depending on the relative glassy and rubbery content. These materials can be blended with other polymers and utilized as additives, toughening agents, and compatibilizers. Most of commercially available block copolymers are derived from petroleum. Renewable alternatives are attractive considering the finite supply of fossil resources on earth and the overall economic and environmental expenses involved in the recovery and use of oil. Furthermore, tomorrow's sustainable materials are demanding the design and implementation with programmed end-of-life. The present review focuses on the preparation and evaluation of new classes of renewable ABA triblock copolymers and also emphasizes on the use of carbohydrate-derived poly(lactide) or plant-based poly(olefins) having a high glass transition temperature and/or high melting temperature for the hard phase in addition to the use of bio-based amorphous hydrocarbon polymers with a low glass transition temperature for the soft components. The combination of multiple controlled polymerizations has proven to be a powerful approach. Precision-controlled synthesis of these hybrid macromolecules has led to the development of new elastomers and tough plastics offering renewability, biodegradability, and high performance.