• Current Optics and Photonics
• /
• v.7 no.5
• /
• pp.562-568
• /
• 2023

We designed a combined nanostructure of inverted pyramidal pits and nanoparticles, which can obtain much stronger field enhancement than traditional periodic pits or nanoparticles. The field enhancement |E|/|E₀| is greater than 10 in a large area at 750-820 nm in incident wavelength. |E_max|/|E₀| is greater than 60. Moreover, the hot spot is obtained outside the pits instead of localized inside them, which is beneficial for experiments such as surface-enhanced Raman scattering. The relations between resonant wavelength and structural parameters are investigated. The resonant wavelength shows a linear dependence on the structure's period, which provides a direct way to tune the resonant wavelength. The excitation of a propagating surface plasmon on the periodic structure's surface, a localized surface plasmon of nanoparticles, and a standing-wave effect contribute to the enhancement.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.409-412
• /
• 2003

An inverted-F antenna for wireless local area network (WLAN) is presented. The proposed design is based on the typical dual-band planar inverted-F antennas (PIFA), which have two tunable resonant modes. The low-profile antenna is built by stamping and designed to be mounted on the metal frame of the laptop LCD panel. The obtained antenna can perform in 2.4GHz and 5GHz bands and be adopted for other wireless applications. All the measurements are performed in the actual test fixture.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.2
• /
• pp.183-187
• /
• 2004

An inverted-F antenna for wireless local area network(WLAN) is presented. The proposed design is based on the typical dual-band planar inverted-F antennas(PIFA), which have two tunable resonant modes. The low-profile antenna is built by stamping and designed to be mounted on the metal frame of the laptop LCD panel. The obtained antenna can perform in 2.4 GHz and 5 GHz bands and be adopted for other wireless applications. All the measurements are performed in the actual test fixture.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.4
• /
• pp.768-773
• /
• 2010

In this paper, we study on an optimal design of a triple-band PIFA (Planar Inverted-F Antenna) of 433 MHz, 912 MHz and 2.45 GHz by using evolution strategy. Generally, the resonant frequency of the PIFA is determined by the width and length of a U-type slot used. However the resonant frequencies of the multiple U slots are varied by the mutual effect of the slots. Thus the optimal width and length of U-type slots are determined by using an optimal design program based on the evolution strategy. To achieve this, an interface program between a commercial EM analysis tool and the optimal design program is constructed for implementing the evolution strategy technique that seeks a global optimum of the objective function through the iterative design process consisting of variation and reproduction. The resonant frequencies of initial model are 439.5 MHz, 981.5 MHz and 2.563 GHz. However, the resonant frequencies of the triple-band PIFA yielded by the optimal design program are 430.5 MHz, 907 MHz and 2.4515 GHz. Measured resonant frequencies are 433.5 MHz, 905.5 MHz and 2.454GHz, which show a good agreement with the simulation results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.12
• /
• pp.1337-1344
• /
• 2007

It is shown that inverted ${\pi}$ feeder affects the gain improvement for the internal antenna of mobile phone. Generation of current on the inverted ${\pi}$ feeder, by the modification of conventional feeding structure for the PIFA and IFA, can apply T matching theory to the new feeder. Therefore, inverted ${\pi}$ feeder based on the T matching theory makes higher radiation resistance, and also increases the gain. To verify inverted ${\pi}$ feeding effect, feeder is applied to GSM/DCS dual band conventional PIFA, and measured return loss and patterns. By measurement, it's shown that this new feeding antenna has $0.23{\sim}0.84$ dB higher average gain for GSM band and $0.01{\sim}1.74$ dB higher average gain for DCS band than conventional fed PIFA without resonant frequency change.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.4
• /
• pp.119-125
• /
• 2007

In this paper, a miniaturized PCB-integrated antenna is proposed for bluetooth applications. The proposed antenna is a modified form of the printed inverted F antenna where the size reduction is achieved by employing the meander strip for the resonant length part of the radiator. The antenna dimension is optimized using the commercial electromagnetic software MWSTM. The designed antenna is fabricated by the standard photo-etching technique and its performance is measured. The fabricated antenna shows a bandwidth of 125MHz centered at 2.45GHz and a gail of -0.23dBi. The size of the proposed antenna is $9.65mm{\times}5.95mm$ corresponding to the 55 percent of the area of the existing printed inverted F antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.3
• /
• pp.297-309
• /
• 1997

In this paper, A small inverted F Antenna with 1.9 GHz frequency band is studied theoretically, characterized by numerical analysis with computer and fabricated in order to use in the proximity sensor. Because of small space for antenna in proximity sensor, .lambda. /4 length plate and dielectric material are used to reduce the size of antenna and broaden the bandwidth. Finite ground body's affection is compensated by dielectric top loading effect which strengthen front direction power about 4 dB. Fabricated antenna is measured and the result is that resonant frequency is 1900.05 MHz, VSWR is 1.02, bandwidth is 194 MHz and input impedance is 50.45-j0.108 [ .ohm. ].

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.10
• /
• pp.99-104
• /
• 2010

In this paper, the internal antenna for mobile communication handset which is able to control both coupling coefficient and resonant frequency without any major modification of radiator and ground plane of PIFA(Planner Inverted F Antenna). The resonant frequency as well as amount of coupling between feeding point and shorting post can be adjusted by changing inductance. Because the inductor is connected on shorting post where the strength of electric field is weak, the performance reduction of the proposed antenna is very small enough to neglect. For the variation of the inductance value within 3.3nH, the resonant frequency of antenna can have operating range of 1650MHz ~ 1830MHz. And as be increased the inductance, the coupling coefficient of antenna is over coupled. This means that it can be electrically controlled the resonant frequency and input impedance of antenna by inductance and minimized the mismatch loss. Size reduction of 10% for PIFA is obtained without any major modifications of antenna elements. For the frequency range from 1650 to 1830MHz, reduction of the measured antenna gain is within 0.93dB as varying the value of inductance from 0 to 3.3nH.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.311-314
• /
• 2002

본 논문에서는 저가의 FR4 칩의 전면과 후면을 이용하여 ISM대역을 만족하는 이중대역 특성의 평면 역F 칩 안테나(PIFcA)를 설계ㆍ분석하였다. 제안된 PIFcA의 크기는 21$\times$5$\times$1mm이고, 10㏈ 반사손실을 기준으로 하여 2.45㎓에 9.54%(2390~2630MHz), 5.775㎓에서 13.89%(5670~6520MHz)의 이중대역 특성을 갖는다. 안테나는 2.45㎓에서 2.2㏈i, 5.77㎓에서 5.2㏈i의 이득특성을 나타내며, 방사패턴은 일반적인 PIFA 방사패턴과 유사하다.

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.197-203
• /
• 2011

A triple-band antenna which can be used at GSM900, PCS1900 and Bluetooth(or Wi-Fi) frequency band is proposed. The proposed antenna is designed based upon switching between IFA(Inverted F Antenna) that has a resonant length of ${\lambda}/4$ and loop antenna that has a resonant length of ${\lambda}/2$. It can be applied to triple-band only by use of single printed pattern due to the switching characteristic. It is designed by use of the IFA for the application to the GSM900, while it is designed by use of the loop antenna for the application to the PCS1900 and by use of additional pattern of IFA for the application to the Bluetooth(or Wi-Fi) respectively. As a result, it has been observed that the proposed antenna satisfies the required return loss(${\leq}10dB$) and also has efficiency(${\geq}80%$) over the whole band. Moreover the proposed antenna has omni-directional radiation pattern which is suitable to apply to the mobile phone.