• 한국통신학회논문지
• /
• 제12권2호
• /
• pp.133-138
• /
• 1987

본 논문에서는 Re-enterant 공동 공진기의 내부 도체봉 길이 변화에 따른 공진 주파수의 가변특성을 실험정그로 고찰하였다. 실험시 제작된 공진기는 동축 케이블과 원형 도파관을 경합한 형태로서 동축 케이블의 내부 도체봉의 길이를 축방향으로 면화시킬 수 있도록 하여, 내부 도체봉의 임의의 길이에 대한 Tmonq 모드의 공진 주파수를 측정하였다. 경과의 타당성을 입증하기 위해서 실험 경과와 여러 사람들의 이론치를 비교하였다. 본 실험의 결과는 파장계, 공진기?l 증폭기의 공진 회로의 설계및 제작에 활용할 수 있으며 마이크로 웨이브 집적회로(MIC, Microwave Integrated Circuits)나 여과기에 사용되는 유전체 공진기의 공진 주파수를 가변시키는데도 사용할 수 있다.

• Smart Structures and Systems
• /
• 제25권4호
• /
• pp.393-399
• /
• 2020

In this paper, the design method and experimental validation for the two-degree-of-freedom (2DOF) electromagnetic energy harvester are presented. The harvester consists of the rigid body suspended by four tension springs and electromagnetic transducers. Once the two resonant frequencies and the mass properties are specified, both the constant and the positions for the springs can be determined in the closed form. The designed harvester can locate two resonant peaks close to each other and forms the extended frequency bandwidth for power harvesting. Halbach magnet array is also introduced to enhance the output power. In the experiment, two resonant frequencies are measured at 34.9 and 37.6 Hz and the frequency bandwidth improves to 5 Hz at the voltage level of 207.9 mV. The normalized peak power of 4.587 mW/G² is obtained at the optimal load resistor of 367 Ω.

• 한국정보통신학회논문지
• /
• 제6권4호
• /
• pp.616-623
• /
• 2002

삼각형 마이크로스트립 패치를 기본으로 프랙털 확장시킨 삼각형 프랙털 안테나(Triangular Fractal Antenna)를 제안한다. TFA의 기본모드와 고차모드에 대한 공진주파수를 스케일링 인자 (scaling factor)를 변화시켜 조절한다. 스케일링 인자의 변화에 따라 공진주파수가 확산 혹은 집중되는 현상을 보인다. 각 프랙털 패치(fractal patch)에서 공진되는 주파수들은 대수 주기적으로 나타난다 이 논문에서 제안된 삼각형 프랙털 안테나는 다중대역 특성을 갖는 시스템에 적용 가능하다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.245-248
• /
• 1997

The dielectric resonators(DRs) with dielectric properties are widely used in microwave integrated circuit(MICs) and monolithic microwave integrated circuits(MMICS). The variational method as numerical simulation scheme would be applied to calculate the resonant frequencies(fr) and Q-factors of microwave dielectric resonators. The dielectric resonator with a cylindrical “puck” structure of high dielectric material is modeled in this simulation. The parameters, such as the diameter, the height, and the dielectric constant of dielectric resonator, would determine the resonant frequency and the Q-factor. The relationship between these parameters would effect each other to evaluate the approximate resonant frequency. This simulation method by the variational formula is very effective to calculate fr, and Q-factor. in high frequency microwave dielectric resonator The error rate of the simulation results and the measured results would be considered to design the microwave dielectric resonators.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.59-66
• /
• 2006

In this paper, we suggested an evaluation method of cracks in a ceramic product by resonant ultrasound spectroscopy. For experiment, we manufactured nondestructive measurement system by resonant ultrasound spectroscopy and measured resonance frequencies of acceptable and cracked ferrules. The evaluation criterion of ferrule is based on the comparison of resonance frequencies between acceptable and cracked-ferrule. The criterion value that defined by suggested formula is 2. By using the criterion, it is possible to evaluate both acceptable and cracked-ferrule.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1283-1285
• /
• 1994

A three-layered piezoelectric ceramic transducer is fabricated with three piezoelectric ceramic disk transducers and two sheets of thin insulator. Its equvalent circuit is derived from the Mason's model of a thickness-driven piezoelectric transducer. We applied the electric input near its fundamental resonant frequency to the center transducer and connect the output voltages across the left and right transducers in series to the resistor load. Then we investigate the load characteristics at resonant frequencies under various resistor loads and the frequency characteristics near the resonant frequency under no load. Moreover, symbolic expressions for input impedances, voltage ratios, resonant frequencies, and bandwidths have been derived. The values calculated from those symbolic expressions are shown to agree well with the measurement values.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1480-1482
• /
• 2000

This paper investigated that resonant frequencies of Air-Gap microstrip patch antenna were tunable when piezoelectric material were used as the antenna substrates. The resonant frequencies of the air-gap antenna using the piezoelectric substrate were able to be controlled by applied AC voltage. The frequency variation of the antenna was great when PZT were applied voltage of the resonant frequency.

• 한국전자파학회논문지
• /
• 제10권3호
• /
• pp.351-358
• /
• 1999

본 논문에서는 유전체가 삽입된 원통형 공진기에서 공진주파수들의 모드를 구분하는 방법에 대하여 기술한다. 공진주파수들의 모드를 구분하기 위해 먼저 빈 원통형 공진기에서 계산된 공진주파수와 EM 시뮬레이터인 Microstripes의 시뮬레이션 결과 값을 비교하였다. TE 모드는 가계를 z방향으로 여기시켰을 때, TM 모드는 자계를 ∮방향으로 여기시킨 경우와 비교하여 구분할 수 있었다. 가운데 유전체가 삽입된 원통형 공진기에 이 결과를 적용해 실험결과와 비교하여 모드를 구분하였다. 이 방법이 올바른 지를 확인하기 위해 유전체의 높이를 변화시키며 모드 추적을 하였다. TE011 모드는 공진주파수의 변화가 커서 다른 공진모드와 순서가 바뀌었으나, TE111 모드와 TE211 모드는 공진주수의 변화가 적었다.

• Journal of Biosystems Engineering
• /
• 제30권1호
• /
• pp.38-44
• /
• 2005

In this study, the acoustic response technique was applied to evaluate the maturity of melon nondestructively. The acoustic response signals through melon were obtained by microphone and signal conditioner with the lapse of days after fruit set. The acoustic parameters such as resonant frequencies and the spectrum energy ratio were analyzed. To investigate the relation between acoustic parameters and firmness of melon, the compression test was performed. Three resonant frequencies representing f1, f2 and f3 were 150 to 250 Hz, 300 to 400 Hz, and 450 to 550 Hz, respectively. The resonant frequencies were shifted to the lower frequencies and the magnitude of spectrum decreased as the maturity of melon increased. Some significant correlations were found between melon firmness and the spectrum energy ratio in some frequency ranges. It is possible to estimate the maturity of melon by acoustic response technique.

• Structural Engineering and Mechanics
• /
• 제74권5호
• /
• pp.671-678
• /
• 2020

In this work, the dynamic properties of a high performance concrete containing glass powder (GP) was studied. The GP is a new cementitious material obtained by recycling waste glass presenting pozzolanic activity. This eco-friendly material was incorporated in concrete mixes by replacing 20 and 30% of cement. The mechanical properties of building materials highly affect the response of the structure under dynamic actions. First, the resonant vibration frequencies were measured on concrete plate with free boundary conditions after 14, 28 and 90 curing days by using an alternative vibration monitoring technique. This technique measures the average frequencies of several excitations done at different points of the plate. This approach takes into account the heterogeneity of a material like concrete. So, the results should be more precise and reliable. For measuring the bending and torsion resonant frequencies, as well as the damping ratio. The dynamic properties of material such as dynamic elastic modulus and dynamic shear modulus were determined by modelling the plate on the finite element software ANSYS. Also, the instantaneous aroused frequency method and ultrasound method were used to determine the dynamic elastic modulus for comparison purpose, with the results obtained from vibration monitoring technique.