• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.791-794
• /
• 2001

We described a method resonant mode identification in dielectric-disc loaded cylindrical cavity resonators. The characteristic equation is solved by using the ContourPlot graph of Mathematica. Contour graph method uses graphical method. It is comparable with numerical method. The numerical method is very difficult a mode identification. The analysis based on the approximated electromagnetic representation. This kinds of studies only concentrated on the calculation of resonant frequencies, and a mode identification of resonant frequencies have not been covered. But, the contour graph method to analyze the characteristic equations is simple and all parts of resonant frequency graph can be easily drawn, it is possible to calculate precise resonant frequencies and to identify the mode of resonant frequencies.

• Interaction and multiscale mechanics
• /
• v.1 no.2
• /
• pp.177-190
• /
• 2008

In this paper, both experimental measurement and theoretical analysis are used to investigate the out-of-plane resonant characteristics of a cantilevered piezoceramic plate in air and three different kinds of fluid. The experimental method, amplitude-fluctuation electronic speckle pattern interferometry (AF-ESPI), is the major technique used in this study to measure the resonant characteristics of the cantilivered piezoceramic plate. Both resonant frequencies and full-field mode shapes are obtained from this experimental technique. Numerical computations based on the finite element analysis are presented for comparison with the experimental results. Good quality of mode shapes for the cantilevered piezoceramic plate in air is obtained from the AF-ESPI technique. However, the quality decreases as the viscosity of fluids increases. From the results provided from experimental measurements and numerical computations, it is indicated that the resonant frequencies of the cantilevered piezoceramic plate in fluid decrease with the increase of the viscosity of fluids. Good agreements between the experimental measured data and the numerical calculated results are found for both resonant frequencies and mode shapes of the cantilevered piezoceramic plate in fluid.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.1
• /
• pp.37-45
• /
• 2002

We described a method of resonant mode identification in dielectric-disc loaded cylindrical cavity resonators. The characteristic equations are solved using the ContourPlot graph of Mathematica. Contour graph method uses graphical method. It is comparable with numerical method. The numerical method is very difficult mode identification. The analysis is based on the approximated electromagnetic representation which is only concentrated on the calculation of resonant frequencies, and a mode identification of resonant frequencies has not been covered. However, It is possible to calculate precise resonant frequencies and to identify the mode of resonant frequencies using the contour graph method. The contour graph method is not a method using approximated representation of electromagnetic field variation at the outer area of dielectric in the resonators. It is a method using enact representation.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.525-528
• /
• 2000

Piezoelectric ceramics can provide electro-mechanical transduction with high stresses but low displacement. To obtain larger displacements, several mechanical amplifying structures have been used. High alternating displacements can be obtained using resonant structure. In this paper, we designed three kinds of the bolt-tightened Langevin type ultrasonic vibrators whose resonant frequencies are 30[kHz], 40[kHz]. FEM(Finite Element Methode) was employed to calculated the resonant frequencies and maximum displacements of designed vibrators. The designed resonant frequencies and computer calculated frequencies were coincided. When input voltages were increased, maximum displacements were also raised. ANSYS was used to find resonant frequencies and calculate displacements of vibrators.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.4
• /
• pp.295-303
• /
• 2001

Condensation of vapor on solid inherently accompanies generation of liquid drops on the solid surface. However, these drops prevent the solid surface from directly contacting the saturated vapor, thus causing thermal resistance. This work investigates a novel mechanism for enhancing the condensation process, in which the condensed drops are rapidly removed from a solid surface by imposing vibration on them. In the experiments, a water drop pendant from a solid surface is vibrated at a fixed frequency while increasing the vibration amplitude. Upon repeating the experiments using various frequencies, it is revealed that there exist resonant frequencies at which the minimum vibration amplitudes inducing a fall-off of the pendant drops are remarkably less than those at neighboring frequencies. These frequencies are supposed to correspond to the resonant frequencies for different modes of drop shape oscillations. They are compared with the resonant frequencies predicted by relatively simple analyses, and the factors causing discrepancy between then are discussed.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.5
• /
• pp.740-746
• /
• 1987

In calculating resonant frequencies of a microstrip resonator the effect of the stray field at resonator edges has been neglected in most publications. The formula for resonant frequencies therefore provided inaccurate results. In the paper the effective dimension and the dynamic dielectic constant of a resonator are defined and obtained for more accurate resonant frequencies and qualty factor by including the effect of stray fields. Theoretical results obtained from the new formula show good agreement with experimental results. In addition, the effect on resonant modes of the distance and coupling angle between the microstrip line and the resonator is also observed.

• Journal of electromagnetic engineering and science
• /
• v.19 no.1
• /
• pp.37-41
• /
• 2019

A stack-ring configuration is proposed for designing a dual-band circularly polarized (CP) antenna. Each ring generates different resonant frequencies. A good CP performance at both resonant frequencies is achieved by adjusting the relative distance between the two rings. The two operating bands are separated with a small frequency ratio of 1.07. Measured results show that radiation patterns with good CP characteristics are obtained at the two resonant frequencies.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.415-418
• /
• 2000

In this paper, we calculated equivalent circuit of Langevin type ultrasonic vibrator and designed a vibrator whose resonant frequency is 50(KHz). FEA (Finite Element Analysis) was employed to calculate the resonant frequencies and maximum displacements of designed vibrators. The computer calculated resonant frequencies were approached to the designed one. As AC voltage input the maximum displacements were shown sinusoidal changes. Terminal input admittance over a frequency range spanning the resonant frequency were calculated. ANSYS was employed to calculate resonant frequencies, displacements and terminal input admittance of vibrators

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.4
• /
• pp.768-773
• /
• 2010

In this paper, we study on an optimal design of a triple-band PIFA (Planar Inverted-F Antenna) of 433 MHz, 912 MHz and 2.45 GHz by using evolution strategy. Generally, the resonant frequency of the PIFA is determined by the width and length of a U-type slot used. However the resonant frequencies of the multiple U slots are varied by the mutual effect of the slots. Thus the optimal width and length of U-type slots are determined by using an optimal design program based on the evolution strategy. To achieve this, an interface program between a commercial EM analysis tool and the optimal design program is constructed for implementing the evolution strategy technique that seeks a global optimum of the objective function through the iterative design process consisting of variation and reproduction. The resonant frequencies of initial model are 439.5 MHz, 981.5 MHz and 2.563 GHz. However, the resonant frequencies of the triple-band PIFA yielded by the optimal design program are 430.5 MHz, 907 MHz and 2.4515 GHz. Measured resonant frequencies are 433.5 MHz, 905.5 MHz and 2.454GHz, which show a good agreement with the simulation results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.53-56
• /
• 2000

Piezoelectric ceramics can provide electro-mechanical transduction with high stresses but low displacement. To obtain larger displacements, several mechanical amplifying structures have been used. High alternating displacements can be obtained using resonant structure. In this paper, we designed a bolt-tightened Langevin type ultrasonic vibrator whose resonant frequency is 50[kHz] and ceramics are multilayered. FEM(Finite Element Methode) was employed to calculate. the resonant frequencies and maximum displacements of designed vibrators. The designed resonant frequency and computer calculated frequencies were coincided. When input voltages were increased, the maximum displacements also rose. As AC voltage was applied, the maximum displacement were shown sinusoidal changes. Terminal input admittance over a frequency range spanning the resonant frequency were calculated. ANSYS was used to find resonant frequencies and calculate displacements of vibrators.