• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.909-917
• /
• 2007

Recently the trend of automobile industry is that IQS evaluation index against a sensitivity quality is increasing. To reduce rattle noise due to speaker sound at low frequencies, it is required the advanced investigation of a package tray panel and a door module panel. This paper optimized the design parameters of package tray panel according to the theoretical background about robust design and suggested the design guideline for resonance avoidance and the reduction of vibrational sensitivity considering the excitation frequency of woofer speaker. In addition, it is suggested the design guideline of a door module panel through the sensitivity analysis in case of the speaker excitation. Finally, the design factor analysis of the quality deviation of a mother-car will make it possible to guarantee the stable characteristics of vehicle vibration in the early stage of vehicle development. These improvements can lead to shortening the time needed to develop better vehicles.

• Structural Engineering and Mechanics
• /
• 제65권6호
• /
• pp.761-769
• /
• 2018

In this work, an optimization method of Friction Tuned Mass Damper (FTMD) parameters is presented. Friction tuned mass dampers (FTMD) are attached to mechanical structures to reduce their vibrations with dissipating the vibratory energy through friction between both bodies. In order to exploit the performances of FTMD, the determination of the optimum parameters is recommended. However, the presence of Coulomb's friction force requires the resolution of a non-linear stick-slip problem. First, this work aims at determining the responses of the vibratory system. The responses of the main mass and of the FTMD are determined analytically in the sticking and sliding phase using the equivalent damping method. Second, this work aims to optimize the FTMD parameters; the friction coefficient and the tuned frequency. The optimization formulation based on the Ricciardelli and Vickery method at the resonance frequencies, this method is reformulated for a system with a viscous damping. The inverse problem of finding the FTMD parameters given the magnitude of the force and the maximum acceptable displacement of the primary system is also considered; the optimization of parameters leads to conclude on the favorable FTMD giving significant vibration decrease, and to advance design recommendations.

• Journal of Biosystems Engineering
• /
• 제14권1호
• /
• pp.1-7
• /
• 1989

This study was carried out to develop a system and methodology to simulate the engine load variation occuring during agricultural field operations for a laboratory engine test. The system consisted of an electric dynamometer, an Apple II microcomputer, and a data acquisition and control system. Several pieces of instruments were utilized to measure various engine performance data. Both engine torque and engine speed were fully controlled by a computer program. The dynamic characteristics of the system were analyzed through a series of tests and the limitations on the load simulation test were presented. The results of the study are summarized as follows: 1. Engine speed and toque were controlled by a computer program. The use of a stepping motor and reduction gears enabled engine speed be controlled within 1 rpm. 2. The natural frequency of the dynamometer-engine system was found to be around 5 Hz, at which the load simulation would be impossible because of resonance. 3. For the harmonic inputs with the frequencies above the natural frequency, the signal attenuated too much and therefore the load simulation was impossible. 4. The step response of the system showed an overshoot of 24.5 percent and the settling time for 5 percent criterion was around 3 seconds. 5. When actual field test data are utilized for load simulation, a low-pass filter should be included to attenuate the frequency components around and above the natural frequency.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1043-1052
• /
• 1993

Field experiments were conducted to determine the optimum combination of performance parameters of a single-shank, tractor-mounted oscillating subsoiler. Tests were conducted at frequencies of oscillation of 3.7 , 5.67, 7.58, 9.48 and 11.456Hz ; amplitudes of 18, 21, 23.5, 34 and 36.5 mm ; and forward speeds of 1.84, 2.19 and 3.42 kmph at moisture content close to the plastic limit of the soil. It was observed that there was a reduction in average draft but an a increase in average total power requirement for oscillating than non-oscillating subsoiling. The draft and power ratios were significantly affected by the forward speed, frequency and amplitude. Their combined interaction expressed in terms of the velocity ratio parameter( the ratio of peak tool velocity and forward speed) however has the strongest influence. At the same velocity ratio, the draft reduction and power increase were less at higher amplitude of oscillation . As the oscillating frequency is increased toward the soil resonance the draft requirement becomes less. For the field conditions tested. the optimum operation was obtained at an amplitude of 36.5mm, frequency of 9.48Hz and speed of 2.19 kmph with a draft ratio of 0.33 and a power ratio of only 1.24.

• Wind and Structures
• /
• 제5권2_3_4호
• /
• pp.329-336
• /
• 2002

The along-wind response of a surface-mounted elastic fence under the action of wind was investigated numerically. In the computations, two sets of equations, one for the simulation of the unsteady turbulent flow and the other for the calculation of the dynamic motion of the fence, were solved alternatively. The resulting time-series tip response of the fence as well as the flow fields were analyzed to examine the dynamic behaviors of the two. Results show that the flow is unsteady and is dominated by two frequencies: one relates to the shear layer vortices and the other one is subject to vortex shedding. The resulting unsteady wind load causes the fence to vibrate. The tip deflection of the fence is periodic and is symmetric to an equilibrium position, corresponding to the average load. Although the along-wind aerodynamic effect is not significant, the fluctuating quantities of the tip deflection, velocity and acceleration are enhanced as the fundamental frequency of the fence is near the vortex or shedding frequency of the flow due to the occurrence of resonance. In addition, when the fence is relatively soft, higher mode response can be excited, leading to significant increases of the variations of the tip velocity and acceleration.

• Structural Engineering and Mechanics
• /
• 제46권2호
• /
• pp.153-177
• /
• 2013

Pendulums can be used as passive vibration control devices in several structures and machines. In the present work, the nonlinear behavior of a pendulum-tower system is studied. The tower is modeled as a bar with variable cross-section with concentrated masses. First, the vibration modes and frequencies of the tower are obtained analytically. The primary structure and absorber together constitute a coupled system which is discretized as a two degrees of freedom nonlinear system, using the normalized eigenfunctions and the Rayleigh-Ritz method. The analysis shows the influence of the geometric nonlinearity of the pendulum absorber on the response of the tower. A parametric analysis also shows that, with an appropriate choice of the absorber parameters, a pendulum can decrease the vibration amplitudes of the tower in the main resonance region. The results also show that the pendulum nonlinearity cannot be neglected in this type of problem, leading to multiplicity of solutions, dynamic jumps and instability. In order to improve the effectiveness of the control during the transient response, a hybrid control system is suggested. The added control force is implemented as a non-linear variable stiffness device based on position and velocity feedback. The obtained results show that this strategy of nonlinear control is attractive, has a good potential and can be used to minimize the response of slender structures under various types of excitation.

• 한국수산과학회지
• /
• 제47권3호
• /
• pp.292-301
• /
• 2014

The objective of this study was to design and develop a broadband ultrasonic transducer that has both wide bandwidth and high sensitivity to measure broadband echoes related to identifying fish species. A broadband ultrasonic transducer providing a nearly flat transmitting response band of 40.2-75.5 kHz with a -12 dB bandwidth of 35.3 kHz was achieved by integrating 12 tonpilz transducer elements operating at different resonance frequencies. The average transmitting voltage response, receiving sensitivity, and figure of merit values in this frequency band were 168.4 dB (re $1{\mu}Pa/V$ at 1 m), -196.8 dB (re $1V/{\mu}Pa$), and -28.4 dB, respectively. The results suggest that bandwidth and sensitivity can be widened and improved by adjusting the array pattern and the structure of tonpilz transducer elements.

• 전자공학회논문지A
• /
• 제28A권11호
• /
• pp.866-873
• /
• 1991

In this paper the electric and magnetic field distributions in a TEM cell used for EMC testing are analyzed numerically. The fields are distorted with the increase of frequency. These distortions are due to higher order modes and resonances and cause the bandwidthe limitations in the uae of TEM cels. The upper frequency is lower modes however, are reflected at some points through the tapered ends of the cell. Higher order modes however, are reflected at some points within the tapered region where it becomes too small to support the modes, The first two TE mode(TE$_{01}$ and TE$_{10}$) cutoff frequencies and the first six TE$_mnp$ resonant ferquencies are identified in a TEM cell (1x0 6x2m,w=0.72m) from field patterns and the results are consistent with others' data. The circumferential wall currents to support resonances are shown. For the large cell it is desired to extend the usable frequency range above the cutoff frequency of the first higher order mode. This study proposes an attempt to expand the frequency bandwidth by a resonance suppression.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.387-390
• /
• 1998

In this paper, HBT's with lower phase noise and passive elements, such as resistors, capacitors and inductors, for resonance and impedance matching networks are designed, fabricated, tested, and carefully analysed, respectively, and then, they are integrated for the design and fabrication of functional X-band oscillators with lower phase noise. Epi-wafers for HBT's with the structure of graded $Al_{x}$G $a_{1-x}$ As emitter and C-doped base layer of 700.angs. thick were used to specially emphasize the improvement of $f_{T}$ and $f_{max}$, and the lowering of phase noise, in design aspects. At the test frequencies of 12GHz, capacitances of MIM capacitors, spiral inductor, and resistances are 0.5~10pF, 0.4~11.06nH, and 20~1,380.ohm., respectively. The emitter size of HBY's for the X-band MMIC oscillators is 3*10u $m^{2}$, and find chip size is 0.9*0.9m $m^{2}$..EX>.

• 한국음향학회지
• /
• 제14권2호
• /
• pp.92-100
• /
• 1995

본 연구에서는 결함이 있는 볼베어링을 모델링하여 결함의 형태별로 진동분석을 하였다. 진동측정은 단일결함과 복합결함이 있는 볼베어링에 대하여 결함위치와 회전속도 변화에 대한 진동신호를 측정하고, 신호 성분들은 고주파 공진기법을 이용해 FFT시켰다. 실험결과 단일결함과 복합결함이 있을 때 결함으로 인해 발생하는 주파수는 결함 특성 주파수와 그 배수의 고조파 성분 피크들이 나타남을 확인하였다. 고주파 공진기법을 이용한 신호처리는 결함의 유무 뿐만 아니라 결함의 부위도 진단이 가능함을 알 수 있었다.