• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.919-924
• /
• 2004

A CFA(Cooling Fan Assembly) is composed of a fan, motor and shroud, which is at the back of the automotive radiator. By forcing the wind to pass, the CFA controls the cooling performance of the radiator. The noise and vibration of the CFA may be primarily due to the resonance between the CFA and engine. The Interference among the fan, shroud and radiator by deformation is considered when the CFA is designed. In this paper, in order to analyze the structural vibration of the CFA for automobiles, a finite element model of the CFA is established by using a commercial FEM code. After the finite element modeling, the natural frequencies and the mode shapes are obtained from the FE analysis. The natural frequencies are obtained from the vibration test as well. Then, the results of the vibration test are compared with those of the FE analysis. The natural frequencies obtained by experiment have a great similarity to the results from FE model. We have confirmed the validity of the FE model and verify the structural safety for the resonance. The stress and displacements are obtained from FE analysis. We have confirmed the safety for the interference and failure.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.216-221
• /
• 2005

Many tanks such as a fresh water tank, an aft peak tank and oil tanks are arranged in the engine room and aft part areas of the ship. By added mass effect of the fluid inside the tanks, the natural frequency will be changed according to filling height of the tank. For this reason, there is possibility of occurrence of excessive vibration by resonance between natural frequencies of local structure and excitation frequencies of the propeller or main engine. Therefore, calculation of natural frequencies is required for structure for many types of tank which are contacting with water or oil to consider added mass effect for anti-resonance design at design stage. In this study, a case of structure damage on the fresh water tank for 2600 TEU container vessel is introduced. In addition, natural frequency analysis and vibration measurement have been performed to investigate vibration characteristics for excessive vibration control.

• 드라이브 ㆍ 컨트롤
• /
• 제14권1호
• /
• pp.1-7
• /
• 2017

The power train of a concrete truck mixer reducer includes differential planetary gears to get a large reduction ratio for operating the mixer drum in a compact structure. These differential planetary gears are a very important part of the mixer reducer where strength problems are the main concern. Gear bending stress, gear compressive stress and scoring failure are the main concerns. Many failures in differential planetary gears are due to the insufficient gear strength and resonance problems caused by major excitation forces such as gear mating failure in the transmission. In the present study, where the excitation frequencies are the gear tooth passing frequencies of the mating gears, a Campbell diagram is used to calculate differential planetary gear critical speeds. Mode shapes and natural frequencies of the differential planetary gears are calculated by CATIA V5. These are used to predict gear resonance failures by comparing the working speed range with the critical speeds due to the gear transmission errors of the differential planetary gears.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.343-343
• /
• 2008

Newly designed structure of a thin ultrasonic rotary motor was proposed. Thin brass plate was used as a cross shaped vibrator and eight ceramic plates were attached on the upper and bottom sides of the brass plate as in Figure 1. The thin type ultrasonic motor has the structure adherent piezoelectric ceramic on the top and bottom surface of the thin elastic body. The direction of polarization is decided so as to occur the elliptical displacement in regular sequence at touch point A, B, C and D of stator contacted with rotor. By applying two electric fields which have 90 degree phase difference on the ceramics, each contact points make rotational displacements as in figure 2. Finite element analysis program ATILA was used to find the optimal size of the stator. As a result of the simulation, elliptical displacements of the tips were obtained at off-resonance frequencies. The maximum displacements of the contact tips were obtained at the length of 16[mm], width of 6[mm] and thickness of 0.4[mm]. Changes of the resonance frequencies were inversely proportional to the length of ceramic and proportional to the width of ceramic. Elliptical motions of the contact tips. of the stator were consistently obtained at off resonance frequencies. From a prototype motor, speed of 600[rpm] was obtained at 20[Vrms].

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1327-1337
• /
• 2018

This paper investigates the vibration behavior of pristine and defected triangular graphene sheets; which has recently attracted the attention of researchers and compare these two types in natural frequencies and sensitivity. Here, the molecular dynamics method has been employed to establish a virtual laboratory for this purpose. After measuring the different parameters obtained by the molecular dynamics approach, these data have been analyzed by using the frequency domain decomposition (FDD) method, and the dominant frequencies and mode shapes of the system have been extracted. By analyzing the vibration behaviors of pristine triangular graphene sheets in four cases (right angle of 45-90-45 configuration, right angle of 60-90-30 configuration, equilateral triangle and isosceles triangle), it has been demonstrated that the natural frequencies of these sheets are higher than the natural frequency of a square sheet, with the same number of atoms, by a minimum of 7.6% and maximum of 26.6%. Therefore, for increasing the resonance range of sensors based on 2D materials, nonrectangular structures, and especially the triangular structure, can be considered as viable candidates. Although the pristine and defective equilateral triangular sheets have the highest values of resonance, the sensitivity of defective (45,90,45) triangular sheet is more than other configurations and then, defective (45,90,45) sheet is the worst choice for sensor applications.

• 한국전자파학회논문지
• /
• 제10권3호
• /
• pp.351-358
• /
• 1999

본 논문에서는 유전체가 삽입된 원통형 공진기에서 공진주파수들의 모드를 구분하는 방법에 대하여 기술한다. 공진주파수들의 모드를 구분하기 위해 먼저 빈 원통형 공진기에서 계산된 공진주파수와 EM 시뮬레이터인 Microstripes의 시뮬레이션 결과 값을 비교하였다. TE 모드는 가계를 z방향으로 여기시켰을 때, TM 모드는 자계를 ∮방향으로 여기시킨 경우와 비교하여 구분할 수 있었다. 가운데 유전체가 삽입된 원통형 공진기에 이 결과를 적용해 실험결과와 비교하여 모드를 구분하였다. 이 방법이 올바른 지를 확인하기 위해 유전체의 높이를 변화시키며 모드 추적을 하였다. TE011 모드는 공진주파수의 변화가 커서 다른 공진모드와 순서가 바뀌었으나, TE111 모드와 TE211 모드는 공진주수의 변화가 적었다.

• Progress in Superconductivity
• /
• 제11권2호
• /
• pp.106-111
• /
• 2010

Sapphire resonators with $YBa_2Cu_3O_{7-\delta}$ (YBCO) endplates have provided a way to realize extremely high quality factor due to the extremely low dielectric loss of sapphire and conductive loss of YBCO films, which enables to measure the low surface resistance of superconductor films at microwave frequencies. We present microwave properties of HTS sapphire resonators designed for measuring the surface resistance of HTS films at millimeter-wave frequencies by using the two-resonance mode dielectric resonator method. Despite enhanced surface resistance ($R_S$) of YBCO films due to the quadratic frequency dependence of the $R_S$, the unloaded quality factor ($Q_0$) of the $TE_{021}$ mode sapphire resonator still appears to be well above $1\;{\times}\;10^6$ at a mm-wave frequency of 38 GHz at 10 K. However, it appears that the $TE_{012}$ mode $Q_0$ is unexpectedly low despite that the corresponding resonance peak looks uncoupled with parasitic modes. We discuss possible reasons for the unexpected results using the surface resistance at the $TE_{021}$, $TE_{012}$, and $TE_{011}$ mode frequencies.

• 한국지구과학회지
• /
• 제43권1호
• /
• pp.188-198
• /
• 2022

지하의 단층들이 지표면까지 도달하지 못하면 단층의 유무를 인지 못하는 경우가 있다. HVSR 분석법으로 지표면 아래 단층의 존재를 판별할 수 있는지 살펴보기 위해 포항분지 흥해지역 동편의 곡강단층을 통과하는 지역을 선정하여 연구를 진행하였다. 교차하는 두개의 측선에서 조밀하게 관측한 배경잡음으로 HVSR 분석을 통해 공명주파수를 산정하였다. 연구지역 내 시추 자료의 기반암 깊이 정보와 시추 지역의 공명주파수를 이용해 상관식을 도출한 후 두측선에서의 공명주파수를 상관식에 적용해 기반암 심도를 산출하였다. HVSR 분석 결과 두 측선에서 기반암 심도가 급격히 변하는 곳이 있다. 특히 곡강단층 인근에서 공명주파수가 급격히 변화하였고, 기존에 알려진 단층이 없는 지역에서도 공명주파수와 기반암 심도가 급격히 변화하는 곳이 있음을 알 수 있었다. 이 형상은 이전에 알려지지 않은 blind fault와 관련이 있을 것으로 사료된다. 본 연구는 지표면에서 인식하지 못하는 단층을 식별하기 위한 HVSR 방법의 적용 가능성을 확인하였다.

• 한국기계연구소 소보
• /
• 통권19호
• /
• pp.5-14
• /
• 1989

Analytical and experimental studies are performed to identify the longitudinal vibration characteristics of elevator system such as the natural frequencies, and the magnification factor at resonance. In the analytical study, a computer program is developed to analyze the vibration characteristics of elevator with varing rope length of elevtor, stiffenss of thimble rod spring, and excitation frequency. The shorter rope length and the stiffer thimble rod spring make the natural frequencies of elevator higer. The resonance at the first natural frequency spreads over the entire travelling range, whereas, that at the second one ranges relatively short, region. The first natural frequencies of the Gald-Star Twin Building and the Korea Trading Center Building obtained by the experiment are overall in good agreement with the analysis result..

• International Journal of Aeronautical and Space Sciences
• /
• 제13권3호
• /
• pp.332-348
• /
• 2012

The present study deals with the parametric resonance behaviour of laminated composite curved shell panels in a hygrothermal environment using Bolotin's approach. A simple laminated model is developed using first order shear deformation theory (FSDT) for the vibration and dynamic stability analysis of laminated composite shells subjected to hygrothermal conditions. A computer program based on the finite element method (FEM) in a MATLAB environment is developed to perform all necessary computations. Quantitative results are presented to show the effects of curvature, ply-orientations, degree of orthotropy and geometry of laminates on the parametric instability of composite curved shell panels for different temperature and moisture concentrations. The excitation frequencies of laminated composite panels decrease with the increase of temperature and moisture due to reduction of stiffness for all laminates.