• Restorative Dentistry and Endodontics
• /
• 제43권4호
• /
• pp.39.1-39.20
• /
• 2018

Magnetic resonance imaging (MRI) is an advanced diagnostic tool used in both medicine and dentistry. Since it functions based on a strong uniform static magnetic field and radiofrequency pulses, it is advantageous over imaging techniques that rely on ionizing radiation. Unfortunately, the magnetic field and radiofrequency pulses generated within the magnetic resonance imager interact unfavorably with dental materials that have magnetic properties. This leads to unwanted effects such as artifact formation, heat generation, and mechanical displacement. These are a potential source of damage to the oral tissue surrounding the affected dental materials. This review aims to compile, based on the current available evidence, recommendations for dentists and radiologists regarding the safety and appropriate management of dental materials during MRI in patients with orthodontic appliances, maxillofacial prostheses, dental implants, direct and indirect restorative materials, and endodontic materials.

• 한국자기학회지
• /
• 제15권5호
• /
• pp.265-269
• /
• 2005

강자성 공명 측정을 통하여 다양한 층 구성을 갖는 교환 바이어스 박막들의 교환 결합 특성에 대해 연구하였다. 공명자기장의 각도의존 실험을 통하여 일축방향이방성 자기장과 일축이방성 자기장을 구하여 분석하였다. NiFe 단일 박막과 비교하여 교환 바이어스된 NiFe/IrMn, IrMn/NiFe/IrMn, NiFe/IrMn/CoFe 박막들은 큰 일축방향이방성 자기장을 나타내었으며, 일축이방성 자기장 또한 큰 값을 나타내었다. 그러나 NiFe/Cu/IrMn의 경우, Cu의 두께가 두꺼울 때는 매우 작은 일축방향이방성 자기장을 나타내었으며, NiFe 단일 박막과 비슷한 크기의 일축이방성 자기장을 나타내었다. NiFe/IrMn/CoFe 박막의 경우 NiFe와 CoFe 강자성층들에 의해 두 개의 공명 자기장이 나타났다. 그 외에 공명 자기장의 선폭에 관한 분석이 교환 바이어스 특성과 연관하여 논의되어졌다.

• Progress in Superconductivity
• /
• 제13권2호
• /
• pp.105-110
• /
• 2011

SQUID sensor-based ultra low-field magnetic resonance apparatus with ${\mu}T$-level measurement field requires a strong prepolarization magnetic field ($B_p$) to magnetize its sample and obtain magnetic resonance signal with a high signal-to-noise ratio. This $B_p$ needs to be ramped down very quickly so that it does not interfere with signal acquisition which must take place before the sample magnetization relaxes off. A MOSFET switch-based $B_p$ coil driver has current ramp-down time ($t_{rd}$) that increases with $B_p$ current, which makes it unsuitable for driving high-field $B_p$ coil made of superconducting material. An energy cycling-type current driver has been developed for such a coil. This driver contains a storage capacitor inside a switch in IGBT-diode bridge configuration, which can manipulate how the capacitor is connected between the $B_p$ coil and its current source. The implemented circuit with 1.2 kV-tolerant devices was capable of driving 32 A current into a thick copper-wire solenoid $B_p$ coil with a 182 mm inner diameter, 0.23 H inductance, and 5.4 mT/A magnetic field-to-current ratio. The measured trd was 7.6 ms with a 160 ${\mu}F$ storage capacitor. trd was dependent only on the inductance of the coil and the capacitance of the driver capacitor. This driver is scalable to significantly higher current of superconducting $B_p$ coils without the $t_{rd}$ becoming unacceptably long with higher $B_p$ current.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 1997년도 제2차 추계학술대회 초록집
• /
• pp.13-13
• /
• 1997

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회.한국자기공명학회 2005년도 공동학술대회
• /
• pp.11-11
• /
• 2005

• 한국자기공명학회:학술대회논문집
• /
• 한국자기공명학회 2000년도 동계총회 및 제16회 자기공명 학술발표회
• /
• pp.20-20
• /
• 2000

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 합동춘계학술대회 논문집 전기물성,응용부문
• /
• pp.179-180
• /
• 2008

In this paper, the variable tendency piezoelectric constant and resonance characteristics piezoelectric ceramics due to the electric field is studied. The practical application of piezoelectric ceramics is not only applied in field of small signal. For example, in case of an ultrasonic motor, $120{\sim}130Vrms$ of driving voltage is needed and that of an piezoelectric pump, $200{\sim}220Vrms$ of voltage is required. Therefore, to examine the characteristics of piezoelectric ceramics in large signal contributes to reducing the susceptibility to the multifarious application and securing the ease of the production of control circuit. These contributions may be connected to the expansion of industrial application. We fabricated disk-type piezoelectric ceramic samples by using conventional method and measured the resonance characteristics of these samples under from low to high voltage driving conditions. According to increasing the value of the input voltage, we measured the resonance frequency of the piezoelectric ceramic, and inquired into the cause of these phenomena.

• 방사선산업학회지
• /
• 제10권4호
• /
• pp.193-198
• /
• 2016

Perfusion magnetic resonance image of biological mechanism are independent of magnetic field strength in hyper acute ischemic stroke. 3.0 T magnetic field, however, does affect the SNRs (signal to noise ratio) and artifacts of PMRI (perfusion magnetic resonance image), which basically will influence the quantitative of PMRI. In this study, the effects of field strength on PMRI are analyzed. The effects of the diseases also are discussed. PMRI in WM(white matter), GM (gray matter), hyper acute ischemic stroke were companied with 1.5 T and 3.0 T on SNR. PMRI also was compared to the SI difference after setting ROI(region of interest) in left and right side of the brain. In conclusion, the SNRs and SI of the 3.0 T PMRI showed higher than those at 1.5 T. In summary, PMRI studies at 3.0 T is provided significantly improved perfusion evaluation when comparing with 1.5 T.

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1213-1217
• /
• 2008

Poling is an important process in fabricating PZT ceramic devices such as filters and resonators and activates piezoelectricity to sintered PZT ceramics. Tolerance of the operating frequency of these devices is tightly required in applications. And a factor to attribute the tolerance is the temperature dependence of the resonance frequency of PZT ceramics. In this paper the relationship of poling strength and temperature dependence of resonance frequency of PZT specimens was studied. The $Pb(Zr_{0.53}Ti_{0.47})O_3$ ceramics were fabricated and the poling strengths were chosen to be 0.5, 1.5, 2.5 and 3.5 [kV/mm]. The dielectric constant of the specimen poled in poling strength 0.5 [kV/mm] was less than that of unpoled specimen and the specimen poled in higher electric field had the higher dielectric constant. (002) peak in X-ray diffraction patterns of the specimens increased as poling strength increased. And the change of resonance frequency of the specimens according to the variation of temperature was measured. Resonance frequency of all specimens increased as the temperature increased. The specimen poled in higher electric field had the smaller positive temperature coefficient of resonance frequency. The effect that temperature coefficient of resonance frequency becomes smaller is obtained when Zr mole in PZT composition equation increase. Controlling the poling strength is believed to be a method to adjust the temperature stability of resonance frequency of the PZT ceramic devices.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.126-127
• /
• 2000

Resonance fluorescence is the manifestation of the interaction between the physical system under consideration and the vacuum-field fluctuation. The fluorescence spectrum provides such physical informations as the energy-level structure of the system, instabilities and relative populations of the energy levels, etc.. One of the typical fluorescence spectra is the Mollow triplet appearing when two-level atoms are driven by a strong coherent field in free space$^{(1)}$ . In the weak field limit, the singlet instead of the triplet is obtained with a reduced linewidth due to the squeezing of one quadrature phase of the induced atomic dipole$^{(2)}$ . On the other hand, when the atoms are put inside a cavity rather than in free space, a doublet spectrum due to the vacuum Rabi-splitting is achieved, showing clearly the coupling of atoms and the cavity in the single-quantum limit$^{(3)}$ . (omitted)