• 한국중재학회지:중재연구
• /
• 제21권1호
• /
• pp.87-107
• /
• 2011

There are two methods to resolve conflicts related to constructions which are through lawsuits and ADR (Alternative Dispute Resolution) just like any other conflicts. Along with the special characteristics pertaining to the conflicts related to constructions, the advantages that ADR is in possession of such as its cost, duration and professionalism, resolving conflicts through ADR has been considered to be more logical than any other options recently. In Korea's case at present, the resolution of conflicts regarding constructions through ADR is mostly dependent on administrative mediation or through arbitration. However, in the case of the administrative mediation, its usage rate is very low due to problems caused by problems in its running and effectiveness. In the case of arbitration, the services of the Korean Commercial Arbitration Board is comparatively used more but because of the fact that arbitration relies on a single trial system and the fact that its executive powers while having the same effectiveness as the final ruling does not get acknowledged leads to the phenomena of avoiding its usage. In addition, in relation to the selective arbitration clause, the problem of effectiveness of the arbitrative agreement is becoming a hindrance to the activation and promotion of the arbitration process. Furthermore, in the case where the ordering body is the government, the public servant involved in the case avoiding the arbitration process because of concerns of being penalized by the internal and external audit within the institution is becoming a problem as well. These problems are not only limited to conflicts regarding constructions and there needs to be actions taken to promote the activation of ADR by enacting a basic law. The more important issue at hand however is offering a resolution measure that would be the most appropriate for users and this could probably be done only through actions such as implementing the American partnering system or the dispute adjudication board system so that they can supervise the resolution of conflicts through mediation, arbitration, and assistance as well as offering consultations regarding conflicts related to constructions.

• 한국언어정보학회지:언어와정보
• /
• 제18권2호
• /
• pp.59-79
• /
• 2014

This paper aims at exploring the processing mechanism of filler-gap dependency resolution and feature checking in Korean wh-constructions. Based on their findings on Japanese sentence processing, Aoshima et al. (2004) have argued that the parser posits a gap in the embedded clause in head-final languages, unlike in head-initial languages, where the parser posits a gap in the matrix clause. In order to verify their findings in the Korean context, and to further explore the mechanisms involved in processing Korean wh-constructions, the present study replicated the study done by Aoshima et al., with some modifications of problematic areas in their original design. Sixty-four Korean native speakers were presented Korean sentences containing a wh-phrase in four conditions, with word order and complementizer type as the two main factors. The participants read sentences segment-by-segment, and the reading times at each segment were measured. The reading time analysis showed that there was no such slowdown at the embedded verb in the scrambled conditions as observed in Aoshima et al. Instead, there was a clear indication of the wh-feature checking process in terms of a major slowdown at the relevant region.

• 대한수학회지
• /
• 제53권1호
• /
• pp.1-17
• /
• 2016

Let $\mathcal{W}$ be an additive full subcategory of the category R-Mod of left R-modules. We provide a method to construct a proper ${\mathcal{W}}^H_C$-resolution (resp. coproper ${\mathcal{W}}^T_C$-coresolution) of one term in a short exact sequence in R-Mod from those of the other two terms. By using these constructions, we introduce and study the stability of the Gorenstein categories ${\mathcal{G}}_C({\mathcal{W}}{\mathcal{W}}^T_C)$ and ${\mathcal{G}}_C({\mathcal{W}}^H_C{\mathcal{W}})$ with respect to a semidualizing bimodule C, and investigate the 2-out-of-3 property of these categories of a short exact sequence by using these constructions. Also we prove how they are related to the Gorenstein categories ${\mathcal{G}}((R{\ltimes}C){\otimes}_R{\mathcal{W}})_C$ and ${\mathcal{G}}(Hom_R(R{\ltimes}C,{\mathcal{W}}))_C$ over $R{\ltimes}C$.

• 환경영향평가
• /
• 제17권6호
• /
• pp.381-391
• /
• 2008

The instances of the damage to livestock are increasing with frequent environmental disputes on the noise and vibration. This study analyzed 134 open cases dealing with the environmental disputes on livestock damaged by noise and vibration, and being intervened by National Environmental Dispute Resolution Commission. The environmental disputes on the noise and vibration account for 86% of all the disputes, and cases of the consequent damages to livestock have increased. As shown in the 134 cases, pig is the most lethal livestock attacked by the noise and vibration. During last 10 years, 89% of the noise damages hurting the livestock resulted from the noises pertaining to construction and 58% was due to the noise damages from the road constructions. The noise levels in the range of 70~80 dB(A) and the vibration levels of 70~75 dB(V) caused most of the disputes. The average rate of reimbursement for the livestock damages for the last 10 years was higher than the average rate of reimbursement of the total disputes intervened by National Dispute Resolution Commission.

• 한국전산유체공학회지
• /
• 제20권2호
• /
• pp.7-15
• /
• 2015

This paper attempts to evaluate the accuracy and efficiency of a design optimization procedure by combining wavelets-based multi resolution analysis method and proper orthogonal decomposition (POD) technique. Aerodynamic design procedure calls for high fidelity computational fluid dynamic (CFD) simulations and the consideration of large number of flow conditions and design constraints. Thus, even with significant computing power advancement, current level of integrated design process requires substantial computing time and resources. POD reduces the degree of freedom of full system by conducting singular value decomposition for various field simulations. In this research, POD combined Design Optimization model is proposed and its efficiency and accuracy are to be evaluated. For additional efficiency improvement of the procedure, multi resolution analysis method is also being employed during snapshot constructions (POD training period). The proposed design procedure was applied to the optimization of wing aerodynamic performance. Throughout the research, it was confirmed that the POD/MRA design procedure could significantly reduce the total design turnaround time and also capture all detailed complex flow features as in full order analysis.

• 한국농공학회논문집
• /
• 제61권5호
• /
• pp.89-99
• /
• 2019

In this study, we estimated the spatially-distributed soil moisture at the high resolution ($10m{\times}10m$) using the satellite-based Sentinel-1A/B SAR (Synthetic Aperture Radar) sensor images. The Sentinel-1A/B raw data were pre-processed using the SNAP (Sentinel Application Platform) tool provided from ESA (European Space Agency), and then the pre-processed data were converted to the backscatter coefficients. The regression equations were derived based on the relationships between the TDR (Time Domain Reflectometry)-based soil moisture measurements and the converted backscatter coefficients. The TDR measurements from the 51 RDA (Rural Development Administration) monitoring sites were used to derive the regression equations. Then, the soil moisture values were estimated using the derived regression equations with the input data of Sentinel-1A/B based backscatter coefficients. Overall, the soil moisture estimates showed the linear trends compared to the TDR measurements with the high Pearson's correlations (more than 0.7). The Sentinel-1A/B based soil moisture values matched well with the TDR measurements with various land surface conditions (bare soil, crop, forest, and urban), especially for bare soil (R: 0.885~0.910 and RMSE: 3.162~4.609). However, the Mandae-ri (forest) and Taean-eup (urban) sites showed the negative correlations with the TDR measurements. These uncertainties might be due to limitations of soil surface penetration depths of SAR sensors and complicated land surface conditions (artificial constructions near the TDR site) at urban regions. These results may infer that qualities of Sentinel-1A/B based soil moisture products are dependent on land surface conditions. Although uncertainties exist, the Sentinel-1A/B based high-resolution soil moisture products could be useful in various areas (hydrology, agriculture, drought, flood, wild fire, etc.).

• Wind and Structures
• /
• 제29권3호
• /
• pp.177-194
• /
• 2019

While establishing adequate load paths in the light-frame wood structures is critical to maintain the overall structural integrity and avoid significant damage under extreme wind events, the understanding of the load paths is limited by the high redundant nature of this building type. The objective of the current study is to evaluate the system effects and investigate the load paths in the wood structures especially the older buildings for a better performance assessment of the existing building stock under high winds, which will provide guidance for building constructions in the future. This is done by developing building models with configurations that are suspicious to induce failure per post damage reconnaissance. The effect of each configuration to the structural integrity is evaluated by the first failure wind speed, amajor indicator beyond the linear to the nonlinear range. A 3D finite-element (FE) building model is adopted as a control case that is modeled using a validated methodology in a highly-detailed fashion where the nonlinearity of connections is explicitly simulated. This model is then altered systematically to analyze the effects of configuration variations in the model such as the gable end sheathing continuity and the gable end truss stiffness, etc. The resolution of the wind loads from scaled wind tunnel tests is also discussed by comparing the effects to wind loads derived from large-scale wind tests.

• 한국공간구조학회논문집
• /
• 제21권3호
• /
• pp.25-34
• /
• 2021

This study develops a new device system for measuring a slope of object with non-adhesive, non-contact and non-face-to-face, namely Inclinometer Slope Laser Measuring (ISLM), that is applicable in the field. This system includes cradle, laser, camera, and computer and the filming and is performed after laser projection at programmed intervals. After measuring the amount of displacement converted to numerical values, these values can then be transferred to the office using the selected data transmission method. The obtained results from the test carried out to verify the reliability of the ISLM system indicated that the ISLM system can measure with accurately level of 0.1mm/Pixel at 1m distance and when increasing the camera resolution, the precision might increase proportionally. Therefore, the proposed measure system may widely apply on-site for various constructions, especially, in the case of object with very high surface temperature where exhibits difficulty to directly measure the adjacent structures. However, due to the sensitive reaction to the illuminance, this method can be applied with caution at times of large changes in illuminance, such as at dawn and at dusk.

• 한국언어정보학회지:언어와정보
• /
• 제13권1호
• /
• pp.127-143
• /
• 2009

Tough-construction is, undoubtedly, one of the most puzzling syntactic problems in the history of transformational grammar. Various approaches have been proposed including Deletion approaches (Akmajian, 1972; Lasnik and Fiengo, 1974) and movement approaches. Among the movement approaches, Chomsky (1977; 1981) argues for movement of null Operator, and Hornstein (2001) argues for a two-step movement equipped with Sideward movement. Most recently, Schueler (2004) and Hartman (2009) each have also argued for a kind of movement approach. With the development of the Minimalist syntax (Chomsky, 1995; Chomsky, 2000; Chomsky, 2001), tough-construction, an age old problem in the description of grammar, turns into another round toward to a more satisfactory answer. By examining the most recent competing analyses of tough-constructions, this paper defends and extends Schueler's (2004) analysis, rather than Hartman's (2009) two step movement approach. Furthermore, this paper proposes that tough-subject originates from the intermediate CP internal Spec-TopicP position rather than from the iterated CP layer (Authier, 1992). This approach has more descriptive power than it was originally argued for in Schueler (2004) and is a step closer toward Minimalism insofar as the conception of government is no longer utilized.

• 한국인터넷방송통신학회논문지
• /
• 제23권6호
• /
• pp.69-74
• /
• 2023

이 논문에서는 일차원과 이차원에서 불규칙한 점 집합에서의 웨이브렛을 구현하고 분석하는 기법이 기술되었다. 특히 우리는 부분할 방법과 계산에 집중하였다. 부분할은 선과 망사를 연속적인 분할 동작의 부드러운 곡선이나 곡선의 표면으로 간략화시키는 기법을 의미한다. 웨이브렛 구조를 특이한 환경에 일반화시키는 열쇠는 일반화된 부분할을 사용하는 것이다. 첫 번째 일반화 구조는 이미 부분할과 연결되었는데 그것은 이차 일반화 웨이브렛 구현에 보다 더 중요하게 되었다. 부분할 구조는 빠른 알고리즘을 제공하여주고, 자연적인 다해상도 구조를 만들어 주어 우리가 추구하려는 기본의 스케일 함수와 웨이브렛을 제공하여 준다.