• Journal of Astronomy and Space Sciences
• /
• v.27 no.4
• /
• pp.309-318
• /
• 2010

We introduce a technical approach for reducing three-dimensional infrared (IR) spectroscopic data generated by integral field spectroscopy or slit-scanning observations. The first part of data reduction using IRAF presents a guideline for processing spectral images from long-slit IR spectroscopy. Multichannel image reconstruction, Image Analysis and Display (MIRIAD) is used in the later part to construct and analyze the data cubes which contain spatial and kinematic information of the objects. This technic has been applied to a sample data set of diffuse 2.1218 ${\mu}m$ $H_2$ 1-0 S(1) emission features observed by slit-scanning around Sgr A East in the Galactic center. Details of image processing for the high-dispersion infrared data are described to suggest a sequence of contamination cleaning and distortion correction. Practical solutions for handling data cubes are presented for survey observations with various configurations of slit positioning.

• 한국정보통신설비학회:학술대회논문집
• /
• 2002.08a
• /
• pp.27-30
• /
• 2002

10-bit 해상도, 10MS/s의 ADC를 Stage 당 1.5-Bit의 Resolution을 가지는 Redundant signed digit(RSD) 방식의 파이프라인 구조를 이용하여 설계하였다. Error Correction Logic을 사용함으로써 비교기를 Coarse하게 설계하였고 잔류 전압 증폭기의 최적 Scaling을 통하여 일반적인 ADC에 비해 성능 저하 없이 효율적으로 소비 전력을 감소시켰다. 또한, Charge Pump의 선택적 사용을 통해 기생 커패시턴스의 영향을 최소화함으로써 잔류전압 증폭기의 출력 전압 특성을 향상 시켰다. 삼성 0.35u CMOS 공정 파라미터를 이용하여 입력 전압 $-1{\sim}1V$, 공급 전압 $-1.5{\sim}1.5V$에서 18.73mW로 설계하였으며 HSPICE로 시뮬레이션 하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.1
• /
• pp.6-11
• /
• 2001

We studied the feasibility of optical lithography for the critical layers of 0.12${\mu}{\textrm}{m}$ DRAM assuming ArF excimer laser as a light source. To enhance the fidelity of aerial image and process margin, Phase shift mask (PSM) patterns as well as binary mask patterns are corrected with in-house developed Optical Proximity Correction (OPC) software. As the result, w found that the aerial image of critical layers of DRAM cell with 0.12${\mu}{\textrm}{m}$ design rule could not be reproduced with binary masks. But if we use PSM or optical proximity corrected PSM, the fidelity of aerial image ,resolution and process margin are so much enhanced that they could be processed with optical lithography.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.537-540
• /
• 2004

Space-borne multi-sensor data could provide fire scar and bum severity mapping. This paper will present detail mapping of burnt areas in Cheongyange Yesan of Korea with ETM+ image. Burn severity map based on ETM+ image was found to be affected by strong topographic illumination effects in mountainous forest area. Topographic effect is a factor which causes errors in classification of high spatial resolution image like IKONOS image. Minnaert constants J( in each band of ETM+ image is derived for reduction of mountainous terrain effects. Finally, this paper computes quantitative analysis of forest fire damage by each forest types.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.432-435
• /
• 2004

MSC (Multi Spectral Camera) system is a remote sensing payload to obtain high resolution ground image. In this application, uniformity characteristic is important as well as GSD (Ground Resolved Distance) and SNR (Signal to Noise Ratio). MSC image chain is consisted of OM (Optical Module), CCD, Video processor, NUC and DCSU (Data Compression and Storage Unit). Each block makes and corrects MSC's nonuniformity response. This paper shows the cause of nonuniformity error and the correction scheme of MSC system from the electronic point of view.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.2
• /
• pp.25-31
• /
• 1999

An array aperture synthesis technique is proposed. The proposed method does not require the condition that the overlapped hydrophones have the identical position in space to estimate the phase correction factors. while the existing ETAM algorithm does. Therefore the proposed method increases the available data applied to extend the effective aperture length of the towed array. From the numerical experiments, the proposed method can reduce the mean square error in estimating the direction of a target signal.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.158-161
• /
• 2000

In this paper, we propose a new technique to compensate for the VCO nonlinearity using only the returned beat signal whose spectrum contains the internal reflections and the targets simultaneously. In the case of a distance measurement system using single antenna, the reflections from the circulator and the antenna are much larger than the return signal from target. The beat signal by these reflections is at much lower frequency than that of the target, and the VCO nonlinearity can be compensated leer using these signals. Indoor experiments were carried out and the results show marked improvement in the shape of range profile arid the range resolution.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.43.2-43.2
• /
• 2010

Following the success of detecting fringes on KVN (Korean VLBI Network), a phase referencing observation is currently planned in order to achieve a better sensitivity in mm-VLBI. The high frequency observation ($\geq$ 22 GHz), wide bandwidths (~512 MHz) and high speed data recording (~1 Gbps, Mark5B) will result in resolution and sensitivity improvement on KVN. In particular, two powerful techniques of VLBI phase correction by fast-antenna switching and multi-frequency phase referencing are also introduced in KVN, hoping to resolve the problem of atmospheric delay errors which degrade the coherence significantly. In this study, we have compared the expected performance of phase referencing between fast antenna switching and multi-frequency phase referencing and discussed the essential condition and postulates of phase referencing for KVN.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.7
• /
• pp.1026-1030
• /
• 2015

In this paper, we propose a signal processing board of an optical delay simulator for evaluating a long-range laser range finder and a laser target designator. We improved the accuracy by applying the clock multiplication and the correction of error gradient. To evaluate the performance of the proposed method, we implemented a prototype board and performed experiments. As a result, we implemented the optical delay simulator with resolution less than 0.7m in measuring distance 60km and a standard deviation of 0.041m. The PRF code detection logic and generation logic have a stability less than 0.03% and 0.08% compared to the NATO standard, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.206.2-206.2
• /
• 2014

Recently, particle induced X-ray emission (PIXE) analysis system was installed at the 2MV ion acceleration system in Korea institute science and technology (KIST). This installation is for complement to low atomic resolution of heavy atoms at Rutherford backscattering spectrometry (RBS) system. For quantitative analysis, a mass calibration of the PIXE set-up has been done with thin film standards and. The GUPIX software package has been used to process the PIXE spectra and the results are compared with the values from RBS system. Therefore, the instrumental constant H (solid angle and correction factor) is determined relying completely on the GUPIX data base (cross-sections, fluorescence and Coster-Kronig probabilities, stopping powers and attenuation coefficients) for a large set of elements. These H values can be used in future analysis.