• Bulletin of the Society of Naval Architects of Korea
• /
• v.16 no.3
• /
• pp.35-47
• /
• 1979

Wave resistance of a parabolic thin ship, with its boundary layer and wake taken into account, was calculated up to second order. In addition to the double-model source distribution on the centerplane, image sources of the wave potential were calculated to keep the body introduced boundary condition undisturbed. Boundary layer and wake effects on the wave-making resistance were included by generating an irrotational flow which matches that exterior to the boundary layer and wake. For this purpose, the boundary layer and wake were calculated. The wave resistance refined with second-order corrections are found to be very important for wave resistance calculations even at moderate Froude numbers($Fr=0.2{\sim}0.3$). Wave-potential corrections are dominate around the bow. On the other hand, Viscosity plays and important role at the stern with its boundary layer and wake development.

• The Plant Pathology Journal
• /
• v.26 no.4
• /
• pp.421-423
• /
• 2010

New sources of barley (Hordeum vulgare L.) resistant to spot blotch, caused by Cochliobolus sativus, are needed to provide effective resistance because of the rapid change pathotype patterns of C. sativus in fields. The purposes of our study were to develop a method to screen barley for resistance to spot blotch disease and then use this methodology to screen barley genotypes for resistance to the major virulent pathotype Pt4 in barley populations in Syria. A transparent tape method, in which a conidial suspension of C. sativus was dropped onto transparent tape and placed, treated-side down, on the second leaf surface of barley plants. Disease symptoms of fungus were easily detected on the leaves covered by the transparent tape after 48h of inoculation. The transparent tape method was repeatable and the disease scores obtained were correlated (r = 0.91, P = 0.001) with those obtained by the seedling assay. This method may be beneficial in various plant pathology breeding programs.

• Current Research on Agriculture and Life Sciences
• /
• v.23
• /
• pp.43-51
• /
• 2005

Pepper genetic resources consisting of introductions from Mexico and Nepal and susceptible and resistant controls were tested for resistance to gray leaf spot and to bacterial spot by serially inoculating the two disease pathogens, Stemphylium spp. first and Xanthomonas campestris pv. vesicatoria next, with application of fungicide after evaluation of resistance to gray leaf spot first. KC866, KC872, KC902, KC905 were resistant to gray leaf spot in addition to known resistance sources, KC43, KC47, KC220, KC319, KC320, KC380. KC897 was on the top of the resistance sources list, even better than KC177(163192), and was followed by KC889, KC896, KC898, all of which were introductions from Nepal.

• Journal of Crop Science and Biotechnology
• /
• v.11 no.3
• /
• pp.177-180
• /
• 2008

Worldwide, cyst nematode(Heterodera glycines Ichinohe) is the most destructive pathogen of cultivated soybean. In the USA, current annual yield losses are estimated to be nearly a billion dollars. Crop losses are primarily reduced by the use of resistant cultivars. Nematode populations are variable and have adapted to reproduce on resistant cultivars over time because resistance primarily traces to two soybean accessions. It is important to use diverse resistance sources to develop new nematode resistant cultivars. Soybean PI 494182 is a recent introduction from Japan and found to be resistant to multiple nematode populations. It is yellow seeded and maturity group 0. We have determined inheritance of resistance in PI 494182 using $F_{2:3}$ families derived from cross PI 494182 X cv. Skylla. Skylla is a susceptible parent. Three nematode populations, races 1, 3, and 5, corresponding to HG types 2.5.7, 0, and 2.5.7 were used to bioassay 162 $F_{2:3}$ families in greenhouse experiments. Based on Chi-square tests, a two-gene model is proposed for resistance to race 1 and a three-gene model is proposed for conditioning resistance to both races 3 and 5. Correlation coefficient analysis indicated that some genes conditioning resistance to races 1, 3, and 5 are shared or closely linked with each other. These results will be useful to soybean breeders for developing soybean cultivars for broad resistance to nematodes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.34-34
• /
• 2010

We report on the influence of heat treatments on the electrical properties of ZnO films grown by molecular-beam epitaxy. We note that the electrical resistance of the ZnO films is significantly changed by the heat treatments: the electrical resistance increases with the increase of ambient temperature, but above a critical temperature the resistance decreases with the increase of temperature, irrespective of ambient gases. On the other hand, it is found that the large amount of photocurrent is generated in the ZnO films, exposed to white sources: the photocurrent decreases with the increase of the obtained resistance, and the current increases with the decrease of the resistance. Also, it is shown that the X-ray diffraction linewidth of the ZnO films is significantly decreased by the heat treatments. These indicate that the increase/decrease of the electrical resistance is ascribed to the annihilation/formation of the residual donor-type defects in the ZnO films by the heat treatments. It is suggested that the increase of the electrical resistance is due to the annihilation of Zni-complex defects, while the decrease of the electrical resistance is due to the formation of VO-complex defects.

• Journal of Ship and Ocean Technology
• /
• v.9 no.3
• /
• pp.1-13
• /
• 2005

A design procedure for a ship with minimum total resistance has been developed using a numerical optimization method called SQP (Sequential Quadratic Programming) to search for optimized hull form and CFD(Computational Fluid Dynamics) technique. The friction resistance is estimated using the ITTC 1957 model-ship correlation line formula and the wave making resistance is evaluated using a potential-flow panel method based on Rankine sources with nonlinear free surface boundary conditions. The geometry of hull surface is represented and modified using B-spline surface patches during the optimization process. Using the Series 60 hull ($C_B$ =0.60) as a base hull, the optimization procedure is applied to obtain an optimal hull that produces the minimum total resistance for the given constraints. To verify the validity of the result, the original model and the optimized model obtained by the optimization process have been built and tested in a towing tank. It is shown that the optimal hull obtained around $13\%$ reduction in the total resistance and around $40\%$ reduction in the residual resistance at a speed tested compared with that of the original one, demonstrating that the present optimization tool can be effectively used for efficient hull form designs.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.3
• /
• pp.96-99
• /
• 2002

We developed 1:1 resistance ratio measurement system for precision measurement of a series-resistor type dc voltage divider. By using active guard technique and exchange technique, any leakage effects, which are one of the most critical error sources, were successfully removed. The best measurement uncertainty with the developed ratio measurement system was estimated to be approximately $10^{-8}\;for\;10\;k{\Omega}\;and\;100\;k{\Omega}$.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.3
• /
• pp.32-39
• /
• 2004

A design procedure for a ship with minimum total resistance has been developed using a numerical optimization method called SQP(sequential quadratic programming) to search for different optimal hull forms. The frictional resistance has been estimated using the ITTC 1957 model-ship correlation line formula, and the wave resistance has been evaluated using a potential-flow panel method that is based on Rankine sources with nonlinear free surface boundary conditions. The geometry of a hull surface has been modified using B-spline surface patches, during the whole optimization process. The numerical analyses have been carried out for the modified Wilgey hull at three different speeds (Fn=0.25, 0.316, 0.408), and the calculation results were compared.

• Journal of Welding and Joining
• /
• v.12 no.4
• /
• pp.110-116
• /
• 1994

This paper has been researched bondability of electronics devices, such as lead frame and the thick film of Ag/Pd on an alumina substrate by different heat sources. To obtain the bonds with high quality, it is very important to consist of different materials. Therefore, this paper clarifies not only heat mechanism of micro parallel gap resistance bonding method and pulse heat tip bonding method but also investigates selection of heat sources with micro-electronic materials for bonding. Finally, it is realized fluxless bonding process with filler metal such as plating layers.

• Horticultural Science & Technology
• /
• v.19 no.1
• /
• pp.7-11
• /
• 2001

A total of 238 accessions of peppers (Capsicum spp.) were evaluated for resistance to powdery mildew (Leveillula taurica (Lev.) Arn) in 1998-1999. KC604, 605, 606 and 608 of C. baccatum, KC616 of C. chinense, and KC638, 640, 641, 642, 643 and 644 of C. pubescens were highly resistant and remained disease-free. KC47-1 (PI244670), KC319-1, KC545, KC320 showed only mild infection compared with susceptible control group, 'Chungok' and others. Therefore, they were considered moderately resistant. Among them, KC47-1, KC319-1 and KC320 are sources of resistance to gray leaf spot caused by Stemphylium spp. while KC47-1 is also resistant to bacterial leaf spot (Xanthomonas campestris pv. vesicatoria (Doidge) Dye). Therefore, they may be used in breeding for multiple resistance to those diseases.