• Journal of Sensor Science and Technology
• /
• v.13 no.6
• /
• pp.411-416
• /
• 2004

In the international temperature scale of 1990 (ITS-90), standard platinum resistance thermometer (SPRT) is a defining standard thermometer used in the temperature range from 13.8033 K to $961^{\circ}C$. Uncertainty of SPRT is about several mK and uncertainty of defining fixed points of the ITS-90 which is used for calibrating SPRT is about several tenth of mK. Above $0^{\circ}C$. the defining fixed points are gallium melting point and indium, tin, zinc, aluminium and silver freezing points which are all realized using an electric furnace or a liquid bath. To realize freezing point of tin ($231.928^{\circ}C$) and zinc ($419.527^{\cir}C$), two 3-zone furnaces which have 3 electric heaters were manufactured. Temperature gradient of the constructed furnaces were tested. Uncertainty caused by temperature gradient of furnace and immersion effect of SPRT in the sealed-type freezing point cells were evaluated 0.038 mK for tin freezing point and 0.036 mK for zinc freezing point.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.4
• /
• pp.395-400
• /
• 1991

Effects of Various Chemical Substrates on Heat Resistance of Isolated EnterobTo pursue the various properties of Enterobacter sp. which may give an outbreak of food-borne disease to man, isolated from the meats and the small intestines of wild mice, and to offer the significant data in the fields of food hygiene and public health this study was carreied, 5 strains of Enterobacter sp. were isolated from the above samples. 5 strains isolated from sample sources were 1 strain (E. aerogenes) from the beeves, 2 strains (E. aerogenes, E intermedium) from the pork and 2 strains (E. aerogenes, E. cloacae) from the small intstines of wild mice. Of total isolatd 89 strains, including non-Enterobacter sp., these numbers of 5 isolates were showed as 5.6% of dection rate. On heating at temperature of $55^{\circ}C$ for 30min., these 5 stratins were generally more resisted in the 0.1M phosphate buffer when such chemical substrates as 0.1M glycine, 5% mannitol or 0.5% sorbitol was added to it whereas they were appeared weaker resistances in 0.1M phosphate buffer when 1% sodium citrate, 1% casein, 10% sodium chloride or 0.1M systein was infused into it.cter sp.

• Fisheries and Aquatic Sciences
• /
• v.25 no.4
• /
• pp.202-213
• /
• 2022

Antibiotic resistant Escherichia coli cases are increasing high especially in Southeast Asia. Illegal use of the antibiotic in the aquaculture farming may become the culprit of the outbreak and spread into environmental source. A study was conducted to: 1) detect the chloramphenicol (CAL)-resistant gene in E. coli isolated from three aquaculture farms and six rivers of northwestern Borneo and 2) investigate the correlation between cat gene with five common antibiotics used. Isolation of E. coli was done on Eosin methylene blue agar and characterized using indole, methyl red, Voges-Proskauer, citrate tests. E. coli isolates were subsequently tested for their susceptibility to five antibiotics commonly used in aqua-farming. The CAL-resistant E. coli were further analyzed for the presence of resistant genes (cat I, cat II, cat III, cat IV) using multiplex polymerase chain reaction. 42 bacterial colonies were isolated from a total of 80 individual water samples, 34 of which were identified as E. coli. Result showed 85.3% of the E. coli isolates were resistant to amoxicillin, 35.3% were resistant to tetracycline, 29.4% were resistant to CAL, 17.6% were resistant to nitrofurantoin and 8.8% were resistant to nalidixic acid. All of the 10 CAL resistant E. coli isolateswere detected with cat II genes; five isolates detected with cat IV genes; three isolates detected with cat III genes; and another two detected with cat I genes. Pearson correlation coefficient shows highly significant relationship between resistance pattern of CAL with amoxicillin; and CAL with tetracycline. Our findings provide the supplementary information of the CAL resistance gene distribution, thereby improving our understanding of the potential risk of antibiotic resistance underlying within this microbial ecosystem.

• Korean journal of applied entomology
• /
• v.22 no.2 s.55
• /
• pp.52-66
• /
• 1983

The brown planthopper, N. lugens (Stal), has become a serious pest of rice in tropical Asia during the last decade. At high pest density, its feeding damage causes 'hopperburn' or complete wilting and drying of the rice plant. It also transmits grassy and ragged stunt virus diseases. The estimated losses caused by the pest in tropical Asia exceed $US\$300$ millions. While cultivation of resistant rice varieties has proved to be highly effective against the pest, their long-term stability is threatened because of the evolution of prolific biotypes which can destroy these varieties. At present, identification of biotypes is based principally on the differential reactions of host rice varieties to the pest and on host-mediated behavioral and physiological responses of the pest. Recent findings of morphological differences in adult rostrum, legs, and antennae, body parts that possess receptors for host plant location and discrimination, and cytological differences in N. lugens populations maintained as stock cultures strongly complement other biotype studies. So far, three N. lugens biotypes have been identified in the Philippines. Biotype I can survive on and damage varieties that do not carry and genes for resistance, while Biotype 2 survives on resistant varieties carrying Bph 1 gene and Biotype 3 on varieties carrying gene bph 2. However, none of these biotypes can survive on varieties with genes Bph 3 or bph 4. Several varieties which are resistant in the Philippines are susceptible in India and Sri Lanka as the South Asian biotypes of N. lugens are more virulent than Southeast Asian biotypes. To monitor the pest biotypes in different geographical regions and to identify new sources of resistance, an International Brown Planthopper Nursery has been established in many cooperating countries. The evolution of biotypes is an exceedingly complex process which is governed by the interactions of genetic and biological factors of the pest populations and the genetic makeup of the cultivated varieties. While the strategy for sequential release of varieties with major resistance genes has been fairly successful so far, the monegenic resistance of these varieties makes them vulnerable to the development of the pest biotypes. Therefore, present breeding endeavors envisage utilizing both major and minor resistance genes for effective control of the pest.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.2
• /
• pp.124-133
• /
• 2011

Bacterial blight (BB), cuased by the vascular pathogen Xanthomonas oryzae pv. oryzae, is one of the major threats in rice fields worldwide. In Korea, two resistance genes against BB, Xa1 and Xa3 had been intensively used for developing high quality japonica rice cultivars. Those traditional resistance sources have being rapidly ified by the adopting of BB pathogen through mutations of the corresponding avr-genes, such as K3a exhibiting high compatibility to both Xa1 and Xa3. To expanding genetic resource against BB in Korea, the Suweon506, an introgression line between a Korean japonica cultivar, Hwaseong and a wild relative, Oryza minuta, was be subjected for genetic analysis owing to the BB resistance. Through association analyses between the pathotyping and genotyping results for each $F_2$ progenies, derived from a cross between Suweon506 and a Tongil type cultivar, Milyang23, a major resistant dominant gene is localized on the subterminal region of rice chromosome 4, where at least three BB resistancde genes, Xa1, Xa2, and Xa22, were reported previously.

• Journal of Environmental Health Sciences
• /
• v.50 no.2
• /
• pp.93-101
• /
• 2024

Background: As pollutants caused by non-point sources flow into rivers, river water quality monitoring for fecal pollution is becoming increasingly important. Objectives: This study was conducted to investigate the distribution of microbial communities in the Yeongsangang River water system and sewage treatment plants in Gwangju and to evaluate their antibiotic resistance. Methods: In the experiment, samples were distributed to five selective media at each point and then cultured for 18 to 24 hours. When bacteria were observed, they were sub-cultured by size and shape and identified using MALDI-TOF MS equipment. When identification was completed, 17 types of antibiotic susceptibility tests were performed using VITEK II equipment, focusing on gram-negative dominant species among the identified strains. Results: During the study period, a total of 266 strains were isolated from 39 samples. Gram-positive bacteria were 37 strains in four genera, or 13.9% of the total, and Gram-negative bacteria were 229 strains in 23 genera, or 86.1% of the total. Antibiotic susceptibility testing of 23 strains, the major dominant species, showed that one strain (4.3%) was resistant to only one antibiotic, and two strains (8.7%) were 100% susceptible to the 17 antibiotics tested. The other 20 strains (87.0%) were multidrug resistant bacteria resistant to two or more antibiotics. There were various types of multidrug resistance. Among them, penicillin and cephalosporin series showed the highest resistance. Conclusions: Based on the results of this study, it was found that the bacterial community structure changed according to regional and environmental factors, and it was judged that continuous research such as genetic analysis of antibiotic-resistant bacteria present in natural rivers is necessary.

• Journal of Environmental Health Sciences
• /
• v.38 no.2
• /
• pp.83-94
• /
• 2012

The research on microbial fuel cells (MFCs) needs various knowledge of different fields such as electrochemistry, microbiology, environmental engineering, and material engineering. Although electrochemically active bacteria are very diverse, the performance of MFCs is affected primarily by the structure of the reactor system. Thus, the development in the system architecture is critical to lower internal resistance and increase power generation for commercialization. This paper summarizes the principles of MFCs and demonstrates the infinite potential of MFCs in various applications including wastewater treatment, biosensors, biohydrogen production, remote power sources, implantable medical devices, etc.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.255-256
• /
• 2016

This paper is presents a initial starting of SST with high voltage level source. Rush current flowing as difference between capacitor level and grid level can crush the whole system. Thus, industries have used initial constituted by resistance and relay. However the initial circuit used in industries can't apply high voltage application due to isolation and economic feasible problems. Therefore many countries study method can charge capacitor with another voltage sources. Also this paper introduce method charging primary side capacitor efficiently.

• Journal of Environmental Health Sciences
• /
• v.24 no.3
• /
• pp.48-53
• /
• 1998

Chitin is known as biodegradable natural polymer. But, in spite of various application of chitin from waste marine sources, commercial use of chitin has been limited due to highly resistance to chemicals and the absense of proper solvents. We made various viscosity of chitosan from chitin by change of Mima's method through the deacetylation which is various condition of NaOH concentration, reaction time and temperature. Also, Polyvinyl alcohol/chitosan blend films were prepared by different solution blends containing the ratio of 5, 10, 15 and 20% chitosan and low, medium, high molecular weight of chitosan to find a more useful biodegradable polymer. Thermal and mechanical properties of PVA/chitosan blend films such as DSC, impact strength, tensile strength and morphological changes by SEM were determined. The 10-15% PVA/chitosan(low, medium) blend films were similar to PVA. Also, PVA/chitosan blend films at the laboratory soil test(Pot Test) were completely degraded in month with four kinds of soils by microorganisms.

• International Journal of Aeronautical and Space Sciences
• /
• v.11 no.3
• /
• pp.201-205
• /
• 2010

DC/DC Switching power converters are commonly used to generate regulated DC output voltages with high-power efficiencies from different DC input sources. A switching converter utilizes one or more energy storage elements such as capacitors, or transformers to efficiently transfer energy from the input to the output at periodic intervals. The fundamental boost converter studied here consists of a power metal-oxide semiconductor field effect transistor switch, an inductor, a capacitor, a diode, and a pulse-width modulation circuit with oscillator, amplifier, and comparator. A buck converter containing a switched-mode power supply is also studied. In this paper, the electrical characteristics of DC/DC power converters are simulated by simulation program with integrated circuit emphasis (SPICE). Furthermore, power efficiency was analyzed based on the specifications of each component.